diff mbox series

[v5,04/18] scsi: Move sd_pr_type to header to share

Message ID 20230324181741.13908-5-michael.christie@oracle.com
State New
Headers show
Series Use block pr_ops in LIO | expand

Commit Message

Mike Christie March 24, 2023, 6:17 p.m. UTC
LIO is going to want to do the same block to/from SCSI pr types as sd.c
so this moves the sd_pr_type helper to a new file. The next patch will
then also add a helper to go from the SCSI value to the block one for use
with PERSISTENT_RESERVE_IN commands.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
---
 drivers/scsi/sd.c            | 33 ++++++++-------------------------
 include/scsi/scsi_block_pr.h | 36 ++++++++++++++++++++++++++++++++++++
 2 files changed, 44 insertions(+), 25 deletions(-)
 create mode 100644 include/scsi/scsi_block_pr.h

Comments

Bart Van Assche March 24, 2023, 6:25 p.m. UTC | #1
On 3/24/23 11:17, Mike Christie wrote:
> diff --git a/include/scsi/scsi_block_pr.h b/include/scsi/scsi_block_pr.h
> new file mode 100644
> index 000000000000..44766d7a81d8
> --- /dev/null
> +++ b/include/scsi/scsi_block_pr.h
> @@ -0,0 +1,36 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef _SCSI_BLOCK_PR_H
> +#define _SCSI_BLOCK_PR_H
> +
> +#include <uapi/linux/pr.h>
> +
> +enum scsi_pr_type {
> +	SCSI_PR_WRITE_EXCLUSIVE			= 0x01,
> +	SCSI_PR_EXCLUSIVE_ACCESS		= 0x03,
> +	SCSI_PR_WRITE_EXCLUSIVE_REG_ONLY	= 0x05,
> +	SCSI_PR_EXCLUSIVE_ACCESS_REG_ONLY	= 0x06,
> +	SCSI_PR_WRITE_EXCLUSIVE_ALL_REGS	= 0x07,
> +	SCSI_PR_EXCLUSIVE_ACCESS_ALL_REGS	= 0x08,
> +};
> +
> +static inline enum scsi_pr_type block_pr_type_to_scsi(enum pr_type type)
> +{
> +	switch (type) {
> +	case PR_WRITE_EXCLUSIVE:
> +		return SCSI_PR_WRITE_EXCLUSIVE;
> +	case PR_EXCLUSIVE_ACCESS:
> +		return SCSI_PR_EXCLUSIVE_ACCESS;
> +	case PR_WRITE_EXCLUSIVE_REG_ONLY:
> +		return SCSI_PR_WRITE_EXCLUSIVE_REG_ONLY;
> +	case PR_EXCLUSIVE_ACCESS_REG_ONLY:
> +		return SCSI_PR_EXCLUSIVE_ACCESS_REG_ONLY;
> +	case PR_WRITE_EXCLUSIVE_ALL_REGS:
> +		return SCSI_PR_WRITE_EXCLUSIVE_ALL_REGS;
> +	case PR_EXCLUSIVE_ACCESS_ALL_REGS:
> +		return SCSI_PR_EXCLUSIVE_ACCESS_ALL_REGS;
> +	}
> +
> +	return 0;
> +}
> +
> +#endif

Hi Mike,

Has it been considered to move enum scsi_pr_type into 
include/scsi/scsi_common.h and block_pr_type_to_scsi() into 
drivers/scsi/scsi_common.c? Other definitions that are shared between 
SCSI initiator and SCSI target code exist in these files.

Thanks,

Bart.
diff mbox series

Patch

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 00b9b6145fbc..7ebf59114da1 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -67,6 +67,7 @@ 
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_ioctl.h>
 #include <scsi/scsicam.h>
+#include <scsi/scsi_block_pr.h>
 
 #include "sd.h"
 #include "scsi_priv.h"
@@ -1692,26 +1693,6 @@  static int sd_get_unique_id(struct gendisk *disk, u8 id[16],
 	return ret;
 }
 
-static char sd_pr_type(enum pr_type type)
-{
-	switch (type) {
-	case PR_WRITE_EXCLUSIVE:
-		return 0x01;
-	case PR_EXCLUSIVE_ACCESS:
-		return 0x03;
-	case PR_WRITE_EXCLUSIVE_REG_ONLY:
-		return 0x05;
-	case PR_EXCLUSIVE_ACCESS_REG_ONLY:
-		return 0x06;
-	case PR_WRITE_EXCLUSIVE_ALL_REGS:
-		return 0x07;
-	case PR_EXCLUSIVE_ACCESS_ALL_REGS:
-		return 0x08;
-	default:
-		return 0;
-	}
-};
-
 static int sd_scsi_to_pr_err(struct scsi_sense_hdr *sshdr, int result)
 {
 	switch (host_byte(result)) {
@@ -1742,8 +1723,8 @@  static int sd_scsi_to_pr_err(struct scsi_sense_hdr *sshdr, int result)
 	}
 }
 
-static int sd_pr_out_command(struct block_device *bdev, u8 sa,
-		u64 key, u64 sa_key, u8 type, u8 flags)
+static int sd_pr_out_command(struct block_device *bdev, u8 sa, u64 key,
+			     u64 sa_key, enum scsi_pr_type type, u8 flags)
 {
 	struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
 	struct scsi_device *sdev = sdkp->device;
@@ -1795,19 +1776,21 @@  static int sd_pr_reserve(struct block_device *bdev, u64 key, enum pr_type type,
 {
 	if (flags)
 		return -EOPNOTSUPP;
-	return sd_pr_out_command(bdev, 0x01, key, 0, sd_pr_type(type), 0);
+	return sd_pr_out_command(bdev, 0x01, key, 0,
+				 block_pr_type_to_scsi(type), 0);
 }
 
 static int sd_pr_release(struct block_device *bdev, u64 key, enum pr_type type)
 {
-	return sd_pr_out_command(bdev, 0x02, key, 0, sd_pr_type(type), 0);
+	return sd_pr_out_command(bdev, 0x02, key, 0,
+				 block_pr_type_to_scsi(type), 0);
 }
 
 static int sd_pr_preempt(struct block_device *bdev, u64 old_key, u64 new_key,
 		enum pr_type type, bool abort)
 {
 	return sd_pr_out_command(bdev, abort ? 0x05 : 0x04, old_key, new_key,
-			     sd_pr_type(type), 0);
+				 block_pr_type_to_scsi(type), 0);
 }
 
 static int sd_pr_clear(struct block_device *bdev, u64 key)
diff --git a/include/scsi/scsi_block_pr.h b/include/scsi/scsi_block_pr.h
new file mode 100644
index 000000000000..44766d7a81d8
--- /dev/null
+++ b/include/scsi/scsi_block_pr.h
@@ -0,0 +1,36 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _SCSI_BLOCK_PR_H
+#define _SCSI_BLOCK_PR_H
+
+#include <uapi/linux/pr.h>
+
+enum scsi_pr_type {
+	SCSI_PR_WRITE_EXCLUSIVE			= 0x01,
+	SCSI_PR_EXCLUSIVE_ACCESS		= 0x03,
+	SCSI_PR_WRITE_EXCLUSIVE_REG_ONLY	= 0x05,
+	SCSI_PR_EXCLUSIVE_ACCESS_REG_ONLY	= 0x06,
+	SCSI_PR_WRITE_EXCLUSIVE_ALL_REGS	= 0x07,
+	SCSI_PR_EXCLUSIVE_ACCESS_ALL_REGS	= 0x08,
+};
+
+static inline enum scsi_pr_type block_pr_type_to_scsi(enum pr_type type)
+{
+	switch (type) {
+	case PR_WRITE_EXCLUSIVE:
+		return SCSI_PR_WRITE_EXCLUSIVE;
+	case PR_EXCLUSIVE_ACCESS:
+		return SCSI_PR_EXCLUSIVE_ACCESS;
+	case PR_WRITE_EXCLUSIVE_REG_ONLY:
+		return SCSI_PR_WRITE_EXCLUSIVE_REG_ONLY;
+	case PR_EXCLUSIVE_ACCESS_REG_ONLY:
+		return SCSI_PR_EXCLUSIVE_ACCESS_REG_ONLY;
+	case PR_WRITE_EXCLUSIVE_ALL_REGS:
+		return SCSI_PR_WRITE_EXCLUSIVE_ALL_REGS;
+	case PR_EXCLUSIVE_ACCESS_ALL_REGS:
+		return SCSI_PR_EXCLUSIVE_ACCESS_ALL_REGS;
+	}
+
+	return 0;
+}
+
+#endif