@@ -1178,6 +1178,23 @@ struct cfg80211_mbssid_elems {
} elem[];
};
+/**
+ * struct cfg80211_rnr_elems - Reduced neighbor report (RNR) elements
+ *
+ * @cnt: Number of elements in array %elems.
+ *
+ * @elem: Array of RNR element(s) to be added into Beacon frames.
+ * @elem.data: Data for RNR elements.
+ * @elem.len: Length of data.
+ */
+struct cfg80211_rnr_elems {
+ u8 cnt;
+ struct {
+ const u8 *data;
+ size_t len;
+ } elem[];
+};
+
/**
* struct cfg80211_beacon_data - beacon data
* @link_id: the link ID for the AP MLD link sending this beacon
@@ -1198,6 +1215,7 @@ struct cfg80211_mbssid_elems {
* @probe_resp_len: length of probe response template (@probe_resp)
* @probe_resp: probe response template (AP mode only)
* @mbssid_ies: multiple BSSID elements
+ * @rnr_ies: reduced neighbor report elements
* @ftm_responder: enable FTM responder functionality; -1 for no change
* (which also implies no change in LCI/civic location data)
* @lci: Measurement Report element content, starting with Measurement Token
@@ -1221,6 +1239,7 @@ struct cfg80211_beacon_data {
const u8 *lci;
const u8 *civicloc;
struct cfg80211_mbssid_elems *mbssid_ies;
+ struct cfg80211_rnr_elems *rnr_ies;
s8 ftm_responder;
size_t head_len, tail_len;
@@ -2794,6 +2794,17 @@ enum nl80211_commands {
* @NL80211_ATTR_HW_TIMESTAMP_ENABLED: Indicates whether HW timestamping should
* be enabled or not (flag attribute).
*
+ * @NL80211_ATTR_EMA_RNR_ELEMS: Optional nested attribute for
+ * reduced neighbor report (RNR) elements. This attribute can be used
+ * only when NL80211_MBSSID_CONFIG_ATTR_EMA is enabled.
+ * Userspace is responsible for splitting the RNR into multiple
+ * elements such that each element excludes the non-transmitting
+ * profiles already included in the MBSSID element
+ * (%NL80211_ATTR_MBSSID_ELEMS) at the same index. Each EMA beacon
+ * will be generated by adding MBSSID and RNR elements at the same
+ * index. If the userspace includes more RNR elements than number of
+ * MBSSID elements then these will be added in every EMA beacon.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3328,6 +3339,8 @@ enum nl80211_attrs {
NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS,
NL80211_ATTR_HW_TIMESTAMP_ENABLED,
+ NL80211_ATTR_EMA_RNR_ELEMS,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -809,6 +809,7 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS] = { .type = NLA_U16 },
[NL80211_ATTR_HW_TIMESTAMP_ENABLED] = { .type = NLA_FLAG },
+ [NL80211_ATTR_EMA_RNR_ELEMS] = { .type = NLA_NESTED },
};
/* policy for the key attributes */
@@ -5425,6 +5426,30 @@ nl80211_parse_mbssid_elems(struct wiphy *wiphy, struct nlattr *attrs)
return elems;
}
+static struct cfg80211_rnr_elems *nl80211_parse_rnr_elems(struct wiphy *wiphy,
+ struct nlattr *attrs)
+{
+ struct nlattr *nl_elems;
+ struct cfg80211_rnr_elems *elems;
+ int rem_elems;
+ u8 i = 0, num_elems = 0;
+
+ nla_for_each_nested(nl_elems, attrs, rem_elems)
+ num_elems++;
+
+ elems = kzalloc(struct_size(elems, elem, num_elems), GFP_KERNEL);
+ if (!elems)
+ return ERR_PTR(-ENOMEM);
+
+ nla_for_each_nested(nl_elems, attrs, rem_elems) {
+ elems->elem[i].data = nla_data(nl_elems);
+ elems->elem[i].len = nla_len(nl_elems);
+ i++;
+ }
+ elems->cnt = num_elems;
+ return elems;
+}
+
static int nl80211_parse_he_bss_color(struct nlattr *attrs,
struct cfg80211_he_bss_color *he_bss_color)
{
@@ -5548,6 +5573,20 @@ static int nl80211_parse_beacon(struct cfg80211_registered_device *rdev,
return PTR_ERR(mbssid);
bcn->mbssid_ies = mbssid;
+
+ if (bcn->mbssid_ies && attrs[NL80211_ATTR_EMA_RNR_ELEMS]) {
+ struct cfg80211_rnr_elems *rnr =
+ nl80211_parse_rnr_elems(&rdev->wiphy,
+ attrs[NL80211_ATTR_EMA_RNR_ELEMS]);
+
+ if (IS_ERR(rnr))
+ return PTR_ERR(rnr);
+
+ if (rnr && rnr->cnt < bcn->mbssid_ies->cnt)
+ return -EINVAL;
+
+ bcn->rnr_ies = rnr;
+ }
}
return 0;
@@ -6096,6 +6135,11 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
goto out_unlock;
}
+ if (!params->mbssid_config.ema && params->beacon.rnr_ies) {
+ err = -EINVAL;
+ goto out_unlock;
+ }
+
err = nl80211_calculate_ap_params(params);
if (err)
goto out_unlock;
@@ -6137,6 +6181,7 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
params->mbssid_config.tx_wdev->netdev &&
params->mbssid_config.tx_wdev->netdev != dev)
dev_put(params->mbssid_config.tx_wdev->netdev);
+ kfree(params->beacon.rnr_ies);
kfree(params);
return err;
@@ -6171,6 +6216,7 @@ static int nl80211_set_beacon(struct sk_buff *skb, struct genl_info *info)
out:
kfree(params.mbssid_ies);
+ kfree(params.rnr_ies);
return err;
}
@@ -10167,6 +10213,8 @@ static int nl80211_channel_switch(struct sk_buff *skb, struct genl_info *info)
free:
kfree(params.beacon_after.mbssid_ies);
kfree(params.beacon_csa.mbssid_ies);
+ kfree(params.beacon_after.rnr_ies);
+ kfree(params.beacon_csa.rnr_ies);
kfree(csa_attrs);
return err;
}
@@ -15952,6 +16000,8 @@ static int nl80211_color_change(struct sk_buff *skb, struct genl_info *info)
out:
kfree(params.beacon_next.mbssid_ies);
kfree(params.beacon_color_change.mbssid_ies);
+ kfree(params.beacon_next.rnr_ies);
+ kfree(params.beacon_color_change.rnr_ies);
kfree(tb);
return err;
}
As per IEEE Std 802.11ax-2021, 11.1.3.8.3 Discovery of a nontransmitted BSSID profile, an EMA AP that transmits a Beacon frame carrying a partial list of nontransmitted BSSID profiles should include in the frame a Reduced Neighbor Report element carrying information for at least the nontransmitted BSSIDs that are not present in the Multiple BSSID element carried in that frame. Add new nested attribute NL80211_ATTR_EMA_RNR_ELEMS to support the above. Number of RNR elements must be more than or equal to the number of MBSSID elements. This attribute can be used only when EMA is enabled. Userspace is responsible for splitting the RNR into multiple elements such that each element excludes the non-transmitting profiles already included in the MBSSID element (%NL80211_ATTR_MBSSID_ELEMS) at the same index. Each EMA beacon will be generated by adding MBSSID and RNR elements at the same index. If the userspace provides more RNR elements than the number of MBSSID elements then these will be added in every EMA beacon. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> --- include/net/cfg80211.h | 19 ++++++++++++++ include/uapi/linux/nl80211.h | 13 ++++++++++ net/wireless/nl80211.c | 50 ++++++++++++++++++++++++++++++++++++ 3 files changed, 82 insertions(+)