diff mbox series

[1/2] dt-bindings: remoteproc: qcom: adsp: add qcom,sdm845-slpi-pas compatible

Message ID 20230325132117.19733-2-me@dylanvanassche.be
State New
Headers show
Series Qualcomm SDM845 SLPI DSP driver support | expand

Commit Message

Dylan Van Assche March 25, 2023, 1:21 p.m. UTC
SLPI DSP remoteproc on DSP is defined by the 'qcom,sdm845-slpi-pas'
compatible in the qcom_q6v5_pas driver. Add this compatible to the
devicetree bindings.

Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
---
 Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml | 3 +++
 1 file changed, 3 insertions(+)

Comments

Krzysztof Kozlowski March 26, 2023, 8:53 a.m. UTC | #1
On 25/03/2023 14:21, Dylan Van Assche wrote:
> SLPI DSP remoteproc on DSP is defined by the 'qcom,sdm845-slpi-pas'
> compatible in the qcom_q6v5_pas driver. Add this compatible to the
> devicetree bindings.
> 
> Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
> ---
>  Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
> index 643ee787a81f..175be01ecd1c 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
> @@ -26,6 +26,7 @@ properties:
>        - qcom,sdm660-adsp-pas
>        - qcom,sdm845-adsp-pas
>        - qcom,sdm845-cdsp-pas
> +      - qcom,sdm845-slpi-pas
>  
>    reg:
>      maxItems: 1
> @@ -63,6 +64,7 @@ allOf:
>                - qcom,msm8998-adsp-pas
>                - qcom,sdm845-adsp-pas
>                - qcom,sdm845-cdsp-pas
> +              - qcom,sdm845-slpi-pas
>      then:
>        properties:
>          clocks:
> @@ -104,6 +106,7 @@ allOf:


You miss also if:then: for power-domains.

Best regards,
Krzysztof
Dylan Van Assche March 27, 2023, 11:39 a.m. UTC | #2
Hi Krzysztof,

On Sun, 2023-03-26 at 10:53 +0200, Krzysztof Kozlowski wrote:
> On 25/03/2023 14:21, Dylan Van Assche wrote:
> > SLPI DSP remoteproc on DSP is defined by the 'qcom,sdm845-slpi-pas'
> > compatible in the qcom_q6v5_pas driver. Add this compatible to the
> > devicetree bindings.
> > 
> > Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
> > ---
> >  Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml | 3
> > +++
> >  1 file changed, 3 insertions(+)
> > 
> > diff --git
> > a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
> > b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
> > index 643ee787a81f..175be01ecd1c 100644
> > --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
> > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
> > @@ -26,6 +26,7 @@ properties:
> >        - qcom,sdm660-adsp-pas
> >        - qcom,sdm845-adsp-pas
> >        - qcom,sdm845-cdsp-pas
> > +      - qcom,sdm845-slpi-pas
> >  
> >    reg:
> >      maxItems: 1
> > @@ -63,6 +64,7 @@ allOf:
> >                - qcom,msm8998-adsp-pas
> >                - qcom,sdm845-adsp-pas
> >                - qcom,sdm845-cdsp-pas
> > +              - qcom,sdm845-slpi-pas
> >      then:
> >        properties:
> >          clocks:
> > @@ -104,6 +106,7 @@ allOf:
> 
> 
> You miss also if:then: for power-domains.

I am not sure what to put for the power-domains, newer remoteprocs from
SM8150/SM8250/SM8350 etc. are not in this binding either.

Could you elaborate a bit here? Thanks!

Kind regards,
Dylan Van Assche

> 
> Best regards,
> Krzysztof
>
Krzysztof Kozlowski March 27, 2023, 12:25 p.m. UTC | #3
On 27/03/2023 13:39, Dylan Van Assche wrote:
> Hi Krzysztof,
> 
> On Sun, 2023-03-26 at 10:53 +0200, Krzysztof Kozlowski wrote:
>> On 25/03/2023 14:21, Dylan Van Assche wrote:
>>> SLPI DSP remoteproc on DSP is defined by the 'qcom,sdm845-slpi-pas'
>>> compatible in the qcom_q6v5_pas driver. Add this compatible to the
>>> devicetree bindings.
>>>
>>> Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
>>> ---
>>>  Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml | 3
>>> +++
>>>  1 file changed, 3 insertions(+)
>>>
>>> diff --git
>>> a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
>>> b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
>>> index 643ee787a81f..175be01ecd1c 100644
>>> --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
>>> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
>>> @@ -26,6 +26,7 @@ properties:
>>>        - qcom,sdm660-adsp-pas
>>>        - qcom,sdm845-adsp-pas
>>>        - qcom,sdm845-cdsp-pas
>>> +      - qcom,sdm845-slpi-pas
>>>  
>>>    reg:
>>>      maxItems: 1
>>> @@ -63,6 +64,7 @@ allOf:
>>>                - qcom,msm8998-adsp-pas
>>>                - qcom,sdm845-adsp-pas
>>>                - qcom,sdm845-cdsp-pas
>>> +              - qcom,sdm845-slpi-pas
>>>      then:
>>>        properties:
>>>          clocks:
>>> @@ -104,6 +106,7 @@ allOf:
>>
>>
>> You miss also if:then: for power-domains.
> 
> I am not sure what to put for the power-domains, 

Doesn't your driver patch clearly state it?

> newer remoteprocs from
> SM8150/SM8250/SM8350 etc. are not in this binding either.

They have their own binding, but why is it an argument to add
sdm845-slpi a bit incomplete?

> 
> Could you elaborate a bit here? Thanks!

There are already examples of other remoteprocs which do it, so I do not
understand why this one is different. What to elaborate more?

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index 643ee787a81f..175be01ecd1c 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -26,6 +26,7 @@  properties:
       - qcom,sdm660-adsp-pas
       - qcom,sdm845-adsp-pas
       - qcom,sdm845-cdsp-pas
+      - qcom,sdm845-slpi-pas
 
   reg:
     maxItems: 1
@@ -63,6 +64,7 @@  allOf:
               - qcom,msm8998-adsp-pas
               - qcom,sdm845-adsp-pas
               - qcom,sdm845-cdsp-pas
+              - qcom,sdm845-slpi-pas
     then:
       properties:
         clocks:
@@ -104,6 +106,7 @@  allOf:
               - qcom,msm8998-slpi-pas
               - qcom,sdm845-adsp-pas
               - qcom,sdm845-cdsp-pas
+              - qcom,sdm845-slpi-pas
     then:
       properties:
         interrupts: