diff mbox series

[V10,3/4] arm64: dts: qcom: Add support for ipq9574 SoC and RDP433 variant

Message ID 20230327132718.573-4-quic_devipriy@quicinc.com
State Superseded
Headers show
Series Add minimal boot support for IPQ9574 | expand

Commit Message

Devi Priya March 27, 2023, 1:27 p.m. UTC
Add initial device tree support for Qualcomm IPQ9574 SoC and
Reference Design Platform(RDP) 433 which is based on IPQ9574
family of SoCs

Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
---
 Changes in V10:
	- Renamed the Board Device Tree Source to use the RDP numbers
	- Updated the Makefile, subject and commit message accordingly

 arch/arm64/boot/dts/qcom/Makefile           |   1 +
 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts |  84 ++++++
 arch/arm64/boot/dts/qcom/ipq9574.dtsi       | 270 ++++++++++++++++++++
 3 files changed, 355 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
 create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi

Comments

Devi Priya March 31, 2023, 12:22 p.m. UTC | #1
On 3/28/2023 4:09 PM, Dmitry Baryshkov wrote:
> On Tue, 28 Mar 2023 at 10:31, Devi Priya <quic_devipriy@quicinc.com> wrote:
>> On 3/27/2023 8:15 PM, Dmitry Baryshkov wrote:
>>> On Mon, 27 Mar 2023 at 16:28, Devi Priya <quic_devipriy@quicinc.com> wrote:
>>>>
>>>> Add initial device tree support for Qualcomm IPQ9574 SoC and
>>>> Reference Design Platform(RDP) 433 which is based on IPQ9574
>>>> family of SoCs
>>>>
>>>> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
>>>> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
>>>> Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
>>>> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
>>>> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
>>>> ---
>>>>    Changes in V10:
>>>>           - Renamed the Board Device Tree Source to use the RDP numbers
>>>>           - Updated the Makefile, subject and commit message accordingly
>>>>
>>>>    arch/arm64/boot/dts/qcom/Makefile           |   1 +
>>>>    arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts |  84 ++++++
>>>>    arch/arm64/boot/dts/qcom/ipq9574.dtsi       | 270 ++++++++++++++++++++
>>>>    3 files changed, 355 insertions(+)
>>>>    create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
>>>>    create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>>>> index 1a29403400b7..52f1f92c5195 100644
>>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>>> @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
>>>>    dtb-$(CONFIG_ARCH_QCOM)        += ipq8074-hk01.dtb
>>>>    dtb-$(CONFIG_ARCH_QCOM)        += ipq8074-hk10-c1.dtb
>>>>    dtb-$(CONFIG_ARCH_QCOM)        += ipq8074-hk10-c2.dtb
>>>> +dtb-$(CONFIG_ARCH_QCOM)        += ipq9574-rdp433.dtb
>>>>    dtb-$(CONFIG_ARCH_QCOM)        += msm8916-acer-a1-724.dtb
>>>>    dtb-$(CONFIG_ARCH_QCOM)        += msm8916-alcatel-idol347.dtb
>>>>    dtb-$(CONFIG_ARCH_QCOM)        += msm8916-asus-z00l.dtb
>>>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
>>>> new file mode 100644
>>>> index 000000000000..2ce8e09e7565
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
>>>> @@ -0,0 +1,84 @@
>>>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>>>> +/*
>>>> + * IPQ9574 RDP433 board device tree source
>>>> + *
>>>> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
>>>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
>>>> + */
>>>> +
>>>> +/dts-v1/;
>>>> +
>>>> +#include "ipq9574.dtsi"
>>>> +
>>>> +/ {
>>>> +       model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
>>>> +       compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
>>>> +
>>>> +       aliases {
>>>> +               serial0 = &blsp1_uart2;
>>>> +       };
>>>> +
>>>> +       chosen {
>>>> +               stdout-path = "serial0:115200n8";
>>>> +       };
>>>> +};
>>>> +
>>>> +&blsp1_uart2 {
>>>> +       pinctrl-0 = <&uart2_pins>;
>>>> +       pinctrl-names = "default";
>>>> +       status = "okay";
>>>> +};
>>>> +
>>>> +&sdhc_1 {
>>>> +       pinctrl-0 = <&sdc_default_state>;
>>>> +       pinctrl-names = "default";
>>>> +       mmc-ddr-1_8v;
>>>> +       mmc-hs200-1_8v;
>>>> +       mmc-hs400-1_8v;
>>>> +       mmc-hs400-enhanced-strobe;
>>>> +       max-frequency = <384000000>;
>>>> +       bus-width = <8>;
>>>> +       status = "okay";
>>>> +};
>>>> +
>>>> +&sleep_clk {
>>>> +       clock-frequency = <32000>;
>>>> +};
>>>> +
>>>> +&tlmm {
>>>> +       sdc_default_state: sdc-default-state {
>>>> +               clk-pins {
>>>> +                       pins = "gpio5";
>>>> +                       function = "sdc_clk";
>>>> +                       drive-strength = <8>;
>>>> +                       bias-disable;
>>>> +               };
>>>> +
>>>> +               cmd-pins {
>>>> +                       pins = "gpio4";
>>>> +                       function = "sdc_cmd";
>>>> +                       drive-strength = <8>;
>>>> +                       bias-pull-up;
>>>> +               };
>>>> +
>>>> +               data-pins {
>>>> +                       pins = "gpio0", "gpio1", "gpio2",
>>>> +                              "gpio3", "gpio6", "gpio7",
>>>> +                              "gpio8", "gpio9";
>>>> +                       function = "sdc_data";
>>>> +                       drive-strength = <8>;
>>>> +                       bias-pull-up;
>>>> +               };
>>>> +
>>>> +               rclk-pins {
>>>> +                       pins = "gpio10";
>>>> +                       function = "sdc_rclk";
>>>> +                       drive-strength = <8>;
>>>> +                       bias-pull-down;
>>>> +               };
>>>> +       };
>>>> +};
>>>> +
>>>> +&xo_board_clk {
>>>> +       clock-frequency = <24000000>;
>>>> +};
>>>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>>> new file mode 100644
>>>> index 000000000000..3bb7435f5e7f
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>>> @@ -0,0 +1,270 @@
>>>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>>>> +/*
>>>> + * IPQ9574 SoC device tree source
>>>> + *
>>>> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
>>>> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
>>>> + */
>>>> +
>>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>>> +#include <dt-bindings/clock/qcom,ipq9574-gcc.h>
>>>> +#include <dt-bindings/reset/qcom,ipq9574-gcc.h>
>>>> +
>>>> +/ {
>>>> +       interrupt-parent = <&intc>;
>>>> +       #address-cells = <2>;
>>>> +       #size-cells = <2>;
>>>> +
>>>> +       clocks {
>>>> +               bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk {
>>>> +                       compatible = "fixed-clock";
>>>> +                       clock-frequency = <353000000>;
>>>> +                       #clock-cells = <0>;
>>>> +               };
>>>
>>> What is the source for this clock? With it clocking at 353 MHz, I
>>> doubt that it is an external clock.
>> bias_pll_ubi_nc_clk (353MHz)is a backup source
>> for Q6_AXIM2_CLK/PCIE2_AXIM_CLK/PCIE3_AXIM_CLK/SNOC-CLK
>> It is from the CMN_PLL, and is the same as that of PPE core clock.
>> Do you suggest to move its clock-frequency to Board DT similar to
>> xo/sleep clock?
> 
> No, I suggest moving it to the device where it originates. If it comes
> from GCC, it should be provided by the GCC, not by the top-level fixed
> clock.Bias PLL is a fixed PLL on the SoC which provides 352MHz.
As it is just a backup source for PCIE2_AXIM_CLK, we would remove the
clock node as it is not being used.

> 
>>>
>>>> +
>>>> +               sleep_clk: sleep-clk {
>>>> +                       compatible = "fixed-clock";
>>>> +                       #clock-cells = <0>;
>>>> +               };
>>>> +
>>>> +               xo_board_clk: xo-board-clk {
>>>> +                       compatible = "fixed-clock";
>>>> +                       #clock-cells = <0>;
>>>> +               };
>>>> +       };
>>>
>>> [skipped the rest]
>>>
>> Regards,
>> Devi Priya
> 
> 
>
Regards,
Devi Priya
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 1a29403400b7..52f1f92c5195 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -8,6 +8,7 @@  dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp433.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-acer-a1-724.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-alcatel-idol347.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-asus-z00l.dtb
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
new file mode 100644
index 000000000000..2ce8e09e7565
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -0,0 +1,84 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 RDP433 board device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq9574.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
+	compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhc_1 {
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	max-frequency = <384000000>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio5";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio4";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio0", "gpio1", "gpio2",
+			       "gpio3", "gpio6", "gpio7",
+			       "gpio8", "gpio9";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		rclk-pins {
+			pins = "gpio10";
+			function = "sdc_rclk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
new file mode 100644
index 000000000000..3bb7435f5e7f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -0,0 +1,270 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 SoC device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,ipq9574-gcc.h>
+#include <dt-bindings/reset/qcom,ipq9574-gcc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <353000000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		xo_board_clk: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x3>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x40000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a73-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		tz_region: tz@4a600000 {
+			reg = <0x0 0x4a600000 0x0 0x400000>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,ipq9574-tlmm";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 65>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			uart2_pins: uart2-state {
+				pins = "gpio34", "gpio35";
+				function = "blsp2_uart";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,ipq9574-gcc";
+			reg = <0x01800000 0x80000>;
+			clocks = <&xo_board_clk>,
+				 <&sleep_clk>,
+				 <&bias_pll_ubi_nc_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		sdhc_1: mmc@7804000 {
+			compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board_clk>;
+			clock-names = "iface", "core", "xo";
+			non-removable;
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@78b1000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b1000 0x200>;
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x0b000000 0x1000>,  /* GICD */
+			      <0x0b002000 0x1000>,  /* GICC */
+			      <0x0b001000 0x1000>,  /* GICH */
+			      <0x0b004000 0x1000>;  /* GICV */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			ranges = <0 0x0b00c000 0x3000>;
+
+			v2m0: v2m@0 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00000000 0xffd>;
+				msi-controller;
+			};
+
+			v2m1: v2m@1000 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00001000 0xffd>;
+				msi-controller;
+			};
+
+			v2m2: v2m@2000 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00002000 0xffd>;
+				msi-controller;
+			};
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			frame@b120000 {
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};