diff mbox series

[01/34] wifi: iwlwifi: mvm: make some HW flags conditional

Message ID 20230329100039.28ec631487bf.I6eb27c3d4c0289a5ec3682f573aae3424f45619f@changeid
State New
Headers show
Series [01/34] wifi: iwlwifi: mvm: make some HW flags conditional | expand

Commit Message

Greenman, Gregory March 29, 2023, 7:05 a.m. UTC 
From: Johannes Berg <johannes.berg@intel.com>

With newer MLD firmware API we no longer need beacon timing
information from the host, so disable TIMING_BEACON_ONLY.

If MLO is enabled (currently only for testing), then we must
not have DEAUTH_NEED_MGD_TX_PREP because mac80211 doesn't
support it yet, we'll have to fix that later.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
---
 drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index c60aff0df801..c76c6b1f0218 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -291,17 +291,28 @@  int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
 	ieee80211_hw_set(hw, SUPPORTS_PS);
 	ieee80211_hw_set(hw, SUPPORTS_DYNAMIC_PS);
 	ieee80211_hw_set(hw, AMPDU_AGGREGATION);
-	ieee80211_hw_set(hw, TIMING_BEACON_ONLY);
 	ieee80211_hw_set(hw, CONNECTION_MONITOR);
 	ieee80211_hw_set(hw, CHANCTX_STA_CSA);
 	ieee80211_hw_set(hw, SUPPORT_FAST_XMIT);
 	ieee80211_hw_set(hw, SUPPORTS_CLONED_SKBS);
 	ieee80211_hw_set(hw, SUPPORTS_AMSDU_IN_AMPDU);
 	ieee80211_hw_set(hw, NEEDS_UNIQUE_STA_ADDR);
-	ieee80211_hw_set(hw, DEAUTH_NEED_MGD_TX_PREP);
 	ieee80211_hw_set(hw, SUPPORTS_VHT_EXT_NSS_BW);
 	ieee80211_hw_set(hw, BUFF_MMPDU_TXQ);
 	ieee80211_hw_set(hw, STA_MMPDU_TXQ);
+
+	/* With MLD FW API, it tracks timing by itself,
+	 * no need for any timing from the host
+	 */
+	if (!mvm->mld_api_is_used)
+		ieee80211_hw_set(hw, TIMING_BEACON_ONLY);
+
+	/* We should probably have this, but mac80211
+	 * currently doesn't support it for MLO.
+	 */
+	if (!(hw->wiphy->flags & WIPHY_FLAG_SUPPORTS_MLO))
+		ieee80211_hw_set(hw, DEAUTH_NEED_MGD_TX_PREP);
+
 	/*
 	 * On older devices, enabling TX A-MSDU occasionally leads to
 	 * something getting messed up, the command read from the FIFO