Message ID | 20230331105546.13607-18-victor.shih@genesyslogic.com.tw |
---|---|
State | Superseded |
Headers | show |
Series | [V7,01/23] mmc: core: Cleanup printing of speed mode at card insertion | expand |
On 31/03/23 13:55, Victor Shih wrote: > This is a sdhci version of mmc's uhs2_set_reg operation. > UHS-II interface (related registers) will be initialised here. > > Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> > Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> > Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw> > --- > drivers/mmc/host/sdhci-uhs2.c | 89 +++++++++++++++++++++++++++++++++++ > 1 file changed, 89 insertions(+) > > diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c > index 71ac76065886..6fe394b1a7be 100644 > --- a/drivers/mmc/host/sdhci-uhs2.c > +++ b/drivers/mmc/host/sdhci-uhs2.c > @@ -278,6 +278,49 @@ static void __sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > sdhci_set_clock(host, host->clock); > } > > +static void sdhci_uhs2_set_config(struct sdhci_host *host) > +{ > + u32 value; > + u16 sdhci_uhs2_set_ptr = sdhci_readw(host, SDHCI_UHS2_SETTINGS_PTR); > + u16 sdhci_uhs2_gen_set_reg = (sdhci_uhs2_set_ptr + 0); > + u16 sdhci_uhs2_phy_set_reg = (sdhci_uhs2_set_ptr + 4); > + u16 sdhci_uhs2_tran_set_reg = (sdhci_uhs2_set_ptr + 8); > + u16 sdhci_uhs2_tran_set_1_reg = (sdhci_uhs2_set_ptr + 12); Perhaps line these up and lose the parentheses. u16 sdhci_uhs2_gen_set_reg = sdhci_uhs2_set_ptr; u16 sdhci_uhs2_phy_set_reg = sdhci_uhs2_set_ptr + 4; u16 sdhci_uhs2_tran_set_reg = sdhci_uhs2_set_ptr + 8; u16 sdhci_uhs2_tran_set_1_reg = sdhci_uhs2_set_ptr + 12; > + > + /* Set Gen Settings */ > + value = FIELD_PREP(SDHCI_UHS2_GEN_SETTINGS_N_LANES_MASK, host->mmc->uhs2_caps.n_lanes_set); > + sdhci_writel(host, value, sdhci_uhs2_gen_set_reg); > + > + /* Set PHY Settings */ > + value = FIELD_PREP(SDHCI_UHS2_PHY_N_LSS_DIR_MASK, host->mmc->uhs2_caps.n_lss_dir_set) | > + FIELD_PREP(SDHCI_UHS2_PHY_N_LSS_SYN_MASK, host->mmc->uhs2_caps.n_lss_sync_set); > + if (host->mmc->ios.timing == MMC_TIMING_UHS2_SPEED_B || > + host->mmc->ios.timing == MMC_TIMING_UHS2_SPEED_B_HD) > + value |= SDHCI_UHS2_PHY_SET_SPEED_B; > + sdhci_writel(host, value, sdhci_uhs2_phy_set_reg); > + > + /* Set LINK-TRAN Settings */ > + value = FIELD_PREP(SDHCI_UHS2_TRAN_RETRY_CNT_MASK, host->mmc->uhs2_caps.max_retry_set) | > + FIELD_PREP(SDHCI_UHS2_TRAN_N_FCU_MASK, host->mmc->uhs2_caps.n_fcu_set); > + sdhci_writel(host, value, sdhci_uhs2_tran_set_reg); > + sdhci_writel(host, host->mmc->uhs2_caps.n_data_gap_set, sdhci_uhs2_tran_set_1_reg); > +} > + > +static int sdhci_uhs2_check_dormant(struct sdhci_host *host) > +{ > + u32 val; > + /* 100ms */ > + int timeout = 100000; > + > + if (read_poll_timeout_atomic(sdhci_readl, val, (val & SDHCI_UHS2_IN_DORMANT_STATE), > + 100, timeout, true, host, SDHCI_PRESENT_STATE)) { atomic not needed > + pr_warn("%s: UHS2 IN_DORMANT fail in 100ms.\n", mmc_hostname(host->mmc)); > + sdhci_dumpregs(host); > + return -EIO; > + } > + return 0; > +} > + > /*****************************************************************************\ > * * > * MMC callbacks * > @@ -360,6 +403,51 @@ static int sdhci_uhs2_enable_clk(struct mmc_host *mmc) > return 0; > } > > +static int sdhci_uhs2_do_detect_init(struct mmc_host *mmc); > + > +static int sdhci_uhs2_control(struct mmc_host *mmc, enum sd_uhs2_operation op) > +{ > + struct sdhci_host *host = mmc_priv(mmc); > + struct mmc_ios *ios = &mmc->ios; > + int err = 0; > + > + DBG("Begin uhs2 control, act %d.\n", op); > + > + switch (op) { > + case UHS2_PHY_INIT: > + err = sdhci_uhs2_do_detect_init(mmc); > + break; > + case UHS2_SET_CONFIG: > + sdhci_uhs2_set_config(host); > + break; > + case UHS2_ENABLE_INT: > + sdhci_uhs2_clear_set_irqs(host, 0, SDHCI_INT_CARD_INT); > + break; > + case UHS2_DISABLE_INT: > + sdhci_uhs2_clear_set_irqs(host, SDHCI_INT_CARD_INT, 0); > + break; > + case UHS2_CHECK_DORMANT: > + err = sdhci_uhs2_check_dormant(host); > + break; > + case UHS2_DISABLE_CLK: > + err = sdhci_uhs2_disable_clk(mmc); > + break; > + case UHS2_ENABLE_CLK: > + err = sdhci_uhs2_enable_clk(mmc); > + break; > + case UHS2_SET_IOS: > + err = sdhci_uhs2_set_ios(mmc, ios); > + break; > + default: > + pr_err("%s: input sd uhs2 operation %d is wrong!\n", > + mmc_hostname(host->mmc), op); > + err = -EIO; > + break; > + } > + > + return err; > +} > + > /*****************************************************************************\ > * * > * Driver init/exit * > @@ -487,6 +575,7 @@ static int sdhci_uhs2_host_ops_init(struct sdhci_host *host) > { > host->mmc_host_ops.start_signal_voltage_switch = > sdhci_uhs2_start_signal_voltage_switch; > + host->mmc_host_ops.uhs2_control = sdhci_uhs2_control; > > return 0; > }
Hi, Adrian On Wed, Apr 12, 2023 at 9:14 PM Adrian Hunter <adrian.hunter@intel.com> wrote: > > On 31/03/23 13:55, Victor Shih wrote: > > This is a sdhci version of mmc's uhs2_set_reg operation. > > UHS-II interface (related registers) will be initialised here. > > > > Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> > > Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> > > Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw> > > --- > > drivers/mmc/host/sdhci-uhs2.c | 89 +++++++++++++++++++++++++++++++++++ > > 1 file changed, 89 insertions(+) > > > > diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c > > index 71ac76065886..6fe394b1a7be 100644 > > --- a/drivers/mmc/host/sdhci-uhs2.c > > +++ b/drivers/mmc/host/sdhci-uhs2.c > > @@ -278,6 +278,49 @@ static void __sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > > sdhci_set_clock(host, host->clock); > > } > > > > +static void sdhci_uhs2_set_config(struct sdhci_host *host) > > +{ > > + u32 value; > > + u16 sdhci_uhs2_set_ptr = sdhci_readw(host, SDHCI_UHS2_SETTINGS_PTR); > > + u16 sdhci_uhs2_gen_set_reg = (sdhci_uhs2_set_ptr + 0); > > + u16 sdhci_uhs2_phy_set_reg = (sdhci_uhs2_set_ptr + 4); > > + u16 sdhci_uhs2_tran_set_reg = (sdhci_uhs2_set_ptr + 8); > > + u16 sdhci_uhs2_tran_set_1_reg = (sdhci_uhs2_set_ptr + 12); > > Perhaps line these up and lose the parentheses. > > u16 sdhci_uhs2_gen_set_reg = sdhci_uhs2_set_ptr; > u16 sdhci_uhs2_phy_set_reg = sdhci_uhs2_set_ptr + 4; > u16 sdhci_uhs2_tran_set_reg = sdhci_uhs2_set_ptr + 8; > u16 sdhci_uhs2_tran_set_1_reg = sdhci_uhs2_set_ptr + 12; > I will update it to the V8 version. > > + > > + /* Set Gen Settings */ > > + value = FIELD_PREP(SDHCI_UHS2_GEN_SETTINGS_N_LANES_MASK, host->mmc->uhs2_caps.n_lanes_set); > > + sdhci_writel(host, value, sdhci_uhs2_gen_set_reg); > > + > > + /* Set PHY Settings */ > > + value = FIELD_PREP(SDHCI_UHS2_PHY_N_LSS_DIR_MASK, host->mmc->uhs2_caps.n_lss_dir_set) | > > + FIELD_PREP(SDHCI_UHS2_PHY_N_LSS_SYN_MASK, host->mmc->uhs2_caps.n_lss_sync_set); > > + if (host->mmc->ios.timing == MMC_TIMING_UHS2_SPEED_B || > > + host->mmc->ios.timing == MMC_TIMING_UHS2_SPEED_B_HD) > > + value |= SDHCI_UHS2_PHY_SET_SPEED_B; > > + sdhci_writel(host, value, sdhci_uhs2_phy_set_reg); > > + > > + /* Set LINK-TRAN Settings */ > > + value = FIELD_PREP(SDHCI_UHS2_TRAN_RETRY_CNT_MASK, host->mmc->uhs2_caps.max_retry_set) | > > + FIELD_PREP(SDHCI_UHS2_TRAN_N_FCU_MASK, host->mmc->uhs2_caps.n_fcu_set); > > + sdhci_writel(host, value, sdhci_uhs2_tran_set_reg); > > + sdhci_writel(host, host->mmc->uhs2_caps.n_data_gap_set, sdhci_uhs2_tran_set_1_reg); > > +} > > + > > +static int sdhci_uhs2_check_dormant(struct sdhci_host *host) > > +{ > > + u32 val; > > + /* 100ms */ > > + int timeout = 100000; > > + > > + if (read_poll_timeout_atomic(sdhci_readl, val, (val & SDHCI_UHS2_IN_DORMANT_STATE), > > + 100, timeout, true, host, SDHCI_PRESENT_STATE)) { > > atomic not needed > I will update it to the V8 version. > > + pr_warn("%s: UHS2 IN_DORMANT fail in 100ms.\n", mmc_hostname(host->mmc)); > > + sdhci_dumpregs(host); > > + return -EIO; > > + } > > + return 0; > > +} > > + > > /*****************************************************************************\ > > * * > > * MMC callbacks * > > @@ -360,6 +403,51 @@ static int sdhci_uhs2_enable_clk(struct mmc_host *mmc) > > return 0; > > } > > > > +static int sdhci_uhs2_do_detect_init(struct mmc_host *mmc); > > + > > +static int sdhci_uhs2_control(struct mmc_host *mmc, enum sd_uhs2_operation op) > > +{ > > + struct sdhci_host *host = mmc_priv(mmc); > > + struct mmc_ios *ios = &mmc->ios; > > + int err = 0; > > + > > + DBG("Begin uhs2 control, act %d.\n", op); > > + > > + switch (op) { > > + case UHS2_PHY_INIT: > > + err = sdhci_uhs2_do_detect_init(mmc); > > + break; > > + case UHS2_SET_CONFIG: > > + sdhci_uhs2_set_config(host); > > + break; > > + case UHS2_ENABLE_INT: > > + sdhci_uhs2_clear_set_irqs(host, 0, SDHCI_INT_CARD_INT); > > + break; > > + case UHS2_DISABLE_INT: > > + sdhci_uhs2_clear_set_irqs(host, SDHCI_INT_CARD_INT, 0); > > + break; > > + case UHS2_CHECK_DORMANT: > > + err = sdhci_uhs2_check_dormant(host); > > + break; > > + case UHS2_DISABLE_CLK: > > + err = sdhci_uhs2_disable_clk(mmc); > > + break; > > + case UHS2_ENABLE_CLK: > > + err = sdhci_uhs2_enable_clk(mmc); > > + break; > > + case UHS2_SET_IOS: > > + err = sdhci_uhs2_set_ios(mmc, ios); > > + break; > > + default: > > + pr_err("%s: input sd uhs2 operation %d is wrong!\n", > > + mmc_hostname(host->mmc), op); > > + err = -EIO; > > + break; > > + } > > + > > + return err; > > +} > > + > > /*****************************************************************************\ > > * * > > * Driver init/exit * > > @@ -487,6 +575,7 @@ static int sdhci_uhs2_host_ops_init(struct sdhci_host *host) > > { > > host->mmc_host_ops.start_signal_voltage_switch = > > sdhci_uhs2_start_signal_voltage_switch; > > + host->mmc_host_ops.uhs2_control = sdhci_uhs2_control; > > > > return 0; > > } > Thanks, Victor Shih
diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c index 71ac76065886..6fe394b1a7be 100644 --- a/drivers/mmc/host/sdhci-uhs2.c +++ b/drivers/mmc/host/sdhci-uhs2.c @@ -278,6 +278,49 @@ static void __sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) sdhci_set_clock(host, host->clock); } +static void sdhci_uhs2_set_config(struct sdhci_host *host) +{ + u32 value; + u16 sdhci_uhs2_set_ptr = sdhci_readw(host, SDHCI_UHS2_SETTINGS_PTR); + u16 sdhci_uhs2_gen_set_reg = (sdhci_uhs2_set_ptr + 0); + u16 sdhci_uhs2_phy_set_reg = (sdhci_uhs2_set_ptr + 4); + u16 sdhci_uhs2_tran_set_reg = (sdhci_uhs2_set_ptr + 8); + u16 sdhci_uhs2_tran_set_1_reg = (sdhci_uhs2_set_ptr + 12); + + /* Set Gen Settings */ + value = FIELD_PREP(SDHCI_UHS2_GEN_SETTINGS_N_LANES_MASK, host->mmc->uhs2_caps.n_lanes_set); + sdhci_writel(host, value, sdhci_uhs2_gen_set_reg); + + /* Set PHY Settings */ + value = FIELD_PREP(SDHCI_UHS2_PHY_N_LSS_DIR_MASK, host->mmc->uhs2_caps.n_lss_dir_set) | + FIELD_PREP(SDHCI_UHS2_PHY_N_LSS_SYN_MASK, host->mmc->uhs2_caps.n_lss_sync_set); + if (host->mmc->ios.timing == MMC_TIMING_UHS2_SPEED_B || + host->mmc->ios.timing == MMC_TIMING_UHS2_SPEED_B_HD) + value |= SDHCI_UHS2_PHY_SET_SPEED_B; + sdhci_writel(host, value, sdhci_uhs2_phy_set_reg); + + /* Set LINK-TRAN Settings */ + value = FIELD_PREP(SDHCI_UHS2_TRAN_RETRY_CNT_MASK, host->mmc->uhs2_caps.max_retry_set) | + FIELD_PREP(SDHCI_UHS2_TRAN_N_FCU_MASK, host->mmc->uhs2_caps.n_fcu_set); + sdhci_writel(host, value, sdhci_uhs2_tran_set_reg); + sdhci_writel(host, host->mmc->uhs2_caps.n_data_gap_set, sdhci_uhs2_tran_set_1_reg); +} + +static int sdhci_uhs2_check_dormant(struct sdhci_host *host) +{ + u32 val; + /* 100ms */ + int timeout = 100000; + + if (read_poll_timeout_atomic(sdhci_readl, val, (val & SDHCI_UHS2_IN_DORMANT_STATE), + 100, timeout, true, host, SDHCI_PRESENT_STATE)) { + pr_warn("%s: UHS2 IN_DORMANT fail in 100ms.\n", mmc_hostname(host->mmc)); + sdhci_dumpregs(host); + return -EIO; + } + return 0; +} + /*****************************************************************************\ * * * MMC callbacks * @@ -360,6 +403,51 @@ static int sdhci_uhs2_enable_clk(struct mmc_host *mmc) return 0; } +static int sdhci_uhs2_do_detect_init(struct mmc_host *mmc); + +static int sdhci_uhs2_control(struct mmc_host *mmc, enum sd_uhs2_operation op) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct mmc_ios *ios = &mmc->ios; + int err = 0; + + DBG("Begin uhs2 control, act %d.\n", op); + + switch (op) { + case UHS2_PHY_INIT: + err = sdhci_uhs2_do_detect_init(mmc); + break; + case UHS2_SET_CONFIG: + sdhci_uhs2_set_config(host); + break; + case UHS2_ENABLE_INT: + sdhci_uhs2_clear_set_irqs(host, 0, SDHCI_INT_CARD_INT); + break; + case UHS2_DISABLE_INT: + sdhci_uhs2_clear_set_irqs(host, SDHCI_INT_CARD_INT, 0); + break; + case UHS2_CHECK_DORMANT: + err = sdhci_uhs2_check_dormant(host); + break; + case UHS2_DISABLE_CLK: + err = sdhci_uhs2_disable_clk(mmc); + break; + case UHS2_ENABLE_CLK: + err = sdhci_uhs2_enable_clk(mmc); + break; + case UHS2_SET_IOS: + err = sdhci_uhs2_set_ios(mmc, ios); + break; + default: + pr_err("%s: input sd uhs2 operation %d is wrong!\n", + mmc_hostname(host->mmc), op); + err = -EIO; + break; + } + + return err; +} + /*****************************************************************************\ * * * Driver init/exit * @@ -487,6 +575,7 @@ static int sdhci_uhs2_host_ops_init(struct sdhci_host *host) { host->mmc_host_ops.start_signal_voltage_switch = sdhci_uhs2_start_signal_voltage_switch; + host->mmc_host_ops.uhs2_control = sdhci_uhs2_control; return 0; }