@@ -34,6 +34,12 @@
#define NUM_SYMBOLS_PER_USEC(_usec) (_usec >> 2)
#define NUM_SYMBOLS_PER_USEC_HALFGI(_usec) (((_usec*5)-4)/18)
+/* Shifts in ar5008_phy.c and ar9003_phy.c are equal for all revisions */
+#define ATH9K_PWRTBL_11NA_OFDM_SHIFT 0
+#define ATH9K_PWRTBL_11NG_OFDM_SHIFT 4
+#define ATH9K_PWRTBL_11NA_HT_SHIFT 8
+#define ATH9K_PWRTBL_11NG_HT_SHIFT 12
+
static u16 bits_per_symbol[][2] = {
/* 20MHz 40MHz */
@@ -1169,13 +1175,14 @@ void ath_update_max_aggr_framelen(struct ath_softc *sc, int queue, int txop)
}
static u8 ath_get_rate_txpower(struct ath_softc *sc, struct ath_buf *bf,
- u8 rateidx, bool is_40, bool is_cck)
+ u8 rateidx, bool is_40, bool is_cck, bool is_mcs)
{
u8 max_power;
struct sk_buff *skb;
struct ath_frame_info *fi;
struct ieee80211_tx_info *info;
struct ath_hw *ah = sc->sc_ah;
+ bool is_2ghz, is_5ghz, use_stbc;
if (sc->tx99_state || !ah->tpc_enabled)
return MAX_RATE_POWER;
@@ -1184,6 +1191,19 @@ static u8 ath_get_rate_txpower(struct ath_softc *sc, struct ath_buf *bf,
fi = get_frame_info(skb);
info = IEEE80211_SKB_CB(skb);
+ is_2ghz = info->band == NL80211_BAND_2GHZ;
+ is_5ghz = info->band == NL80211_BAND_5GHZ;
+ use_stbc = is_mcs && rateidx < 8 && (info->flags &
+ IEEE80211_TX_CTL_STBC);
+
+ if (is_mcs)
+ rateidx += is_5ghz ? ATH9K_PWRTBL_11NA_HT_SHIFT
+ : ATH9K_PWRTBL_11NG_HT_SHIFT;
+ else if (is_2ghz && !is_cck)
+ rateidx += ATH9K_PWRTBL_11NG_OFDM_SHIFT;
+ else
+ rateidx += ATH9K_PWRTBL_11NA_OFDM_SHIFT;
+
if (!AR_SREV_9300_20_OR_LATER(ah)) {
int txpower = fi->tx_power;
@@ -1193,10 +1213,8 @@ static u8 ath_get_rate_txpower(struct ath_softc *sc, struct ath_buf *bf,
u16 eeprom_rev = ah->eep_ops->get_eeprom_rev(ah);
if (eeprom_rev >= AR5416_EEP_MINOR_VER_2) {
- bool is_2ghz;
struct modal_eep_header *pmodal;
- is_2ghz = info->band == NL80211_BAND_2GHZ;
pmodal = &eep->modalHeader[is_2ghz];
power_ht40delta = pmodal->ht40PowerIncForPdadc;
} else {
@@ -1229,7 +1247,7 @@ static u8 ath_get_rate_txpower(struct ath_softc *sc, struct ath_buf *bf,
if (!max_power && !AR_SREV_9280_20_OR_LATER(ah))
max_power = 1;
} else if (!bf->bf_state.bfs_paprd) {
- if (rateidx < 8 && (info->flags & IEEE80211_TX_CTL_STBC))
+ if (use_stbc)
max_power = min_t(u8, ah->tx_power_stbc[rateidx],
fi->tx_power);
else
@@ -1319,7 +1337,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf,
}
info->txpower[i] = ath_get_rate_txpower(sc, bf, rix,
- is_40, false);
+ is_40, false, true);
continue;
}
@@ -1350,7 +1368,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf,
is_cck = IS_CCK_RATE(info->rates[i].Rate);
info->txpower[i] = ath_get_rate_txpower(sc, bf, rix, false,
- is_cck);
+ is_cck, false);
}
/* For AR5416 - RTS cannot be followed by a frame larger than 8K */
Fix incorrect usage of plain rate_idx as index into the max (power) per rate lookup table. For transmit power control (TPC), the ath9k driver maintains internal tables (in struct ath_hw) to store the max allowed power level per rate. They are used to limit a given TX-power according to regulatory and user limits in the TX-path per packet. The tables are filled in a predefined order, starting with values for CCK + OFDM rates and followed by the values for MCS rates. Thus, the maximum power levels for MCS do not start at index 0 in the table but are shifted by a fixed value. The TX-power limiting in ath_get_rate_txpower did not apply this shift, thus retrieved the incorrect maximum power level. For example, the maximum power for OFDM rate 0 was used for MCS rate 0. If STBC was used, the power was mostly limited to 0 because the STBC table is zeroed for legacy CCK/OFDM rates. This patch fixes this table lookup. Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com> --- drivers/net/wireless/ath/ath9k/xmit.c | 30 +++++++++++++++++++++------ 1 file changed, 24 insertions(+), 6 deletions(-)