diff mbox series

[02/40] dt-bindings: pinctrl: qcom,ipq6018: simplify with unevaluatedProperties

Message ID 20230407184546.161168-2-krzysztof.kozlowski@linaro.org
State Accepted
Commit b64e16983f8cfc9cdf8662f04f762a3e8498fcb0
Headers show
Series [01/40] dt-bindings: pinctrl: qcom,ipq5332-tlmm: simplify with unevaluatedProperties | expand

Commit Message

Krzysztof Kozlowski April 7, 2023, 6:45 p.m. UTC 
All Qualcomm SoC Top Level Mode Multiplexer pin controllers have similar
capabilities regarding pin properties, thus we can just accept entire
set provided by qcom,tlmm-common.yaml schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml         | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
index 28f1b6a07b70..7c3e5e043f07 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
@@ -43,6 +43,7 @@  $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -89,18 +90,9 @@  $defs:
                 sd_write, sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2,
                 uim3, uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#