| Message ID | 20230407082937.14558-7-chunfeng.yun@mediatek.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2,1/7] usb: mtu3: give back request when rx error happens | expand |
diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h index 2d7b57e07eee..b4a7662dded5 100644 --- a/drivers/usb/mtu3/mtu3.h +++ b/drivers/usb/mtu3/mtu3.h @@ -90,7 +90,7 @@ struct mtu3_request; */ #define EP0_RESPONSE_BUF 6 -#define BULK_CLKS_CNT 4 +#define BULK_CLKS_CNT 6 /* device operated link and speed got from DEVICE_CONF register */ enum mtu3_speed { diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c index d78ae52b4e26..6f264b129243 100644 --- a/drivers/usb/mtu3/mtu3_plat.c +++ b/drivers/usb/mtu3/mtu3_plat.c @@ -234,6 +234,8 @@ static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb) clks[1].id = "ref_ck"; clks[2].id = "mcu_ck"; clks[3].id = "dma_ck"; + clks[4].id = "xhci_ck"; + clks[5].id = "frmcnt_ck"; ret = devm_clk_bulk_get_optional(dev, BULK_CLKS_CNT, clks); if (ret) return ret;
Add optional clock 'xhci_ck' which is usually the same as sys_ck, but some SoC use two separated clocks when the controller supports dual role mode; Add optional clock 'frmcnt_ck' used on 4nm or advanced process SoC. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> --- v2: no changes --- drivers/usb/mtu3/mtu3.h | 2 +- drivers/usb/mtu3/mtu3_plat.c | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-)