diff mbox series

[35/40] dt-bindings: pinctrl: qcom,sm7150-tlmm: simplify with unevaluatedProperties

Message ID 20230407184546.161168-35-krzysztof.kozlowski@linaro.org
State Accepted
Commit 647c16ac7b15fc8fe6ab679690ac2ffe7c53abd3
Headers show
Series [01/40] dt-bindings: pinctrl: qcom,ipq5332-tlmm: simplify with unevaluatedProperties | expand

Commit Message

Krzysztof Kozlowski April 7, 2023, 6:45 p.m. UTC
All Qualcomm SoC Top Level Mode Multiplexer pin controllers have similar
capabilities regarding pin properties, thus we can just accept entire
set provided by qcom,tlmm-common.yaml schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

Comments

Krzysztof Kozlowski May 12, 2023, 4:25 p.m. UTC | #1
On Fri, 07 Apr 2023 20:45:41 +0200, Krzysztof Kozlowski wrote:
> All Qualcomm SoC Top Level Mode Multiplexer pin controllers have similar
> capabilities regarding pin properties, thus we can just accept entire
> set provided by qcom,tlmm-common.yaml schema.
> 
> 

Applied, thanks!

[35/40] dt-bindings: pinctrl: qcom,sm7150-tlmm: simplify with unevaluatedProperties
        https://git.kernel.org/krzk/linux-dt/c/647c16ac7b15fc8fe6ab679690ac2ffe7c53abd3

Best regards,
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml
index a57d44efe5bd..ede0f3acad9c 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml
@@ -62,6 +62,7 @@  $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -102,19 +103,9 @@  $defs:
                 wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk,
                 wsa_data ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg