| Message ID | 20230407180045.126952-1-krzysztof.kozlowski@linaro.org |
|---|---|
| State | Accepted |
| Commit | 8624e6063cb15cc7ceeee6d54fc1761ab3d0baf7 |
| Headers | show |
| Series | arm64: dts: qcom: apq8016: remove superfluous "input-enable" | expand |
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index 27ceaa94c8bd..59860a2223b8 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -729,7 +729,6 @@ usb_id_default: usb-id-default-state { function = "gpio"; drive-strength = <8>; - input-enable; bias-pull-up; }; @@ -770,7 +769,6 @@ msm_key_volp_n_default: msm-key-volp-n-default-state { function = "gpio"; drive-strength = <8>; - input-enable; bias-pull-up; }; };
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 2 -- 1 file changed, 2 deletions(-)