diff mbox series

[v2,5/9] serial: msm-geni: fix code indentation

Message ID 20230412143006.80946-6-vladimir.zapolskiy@linaro.org
State Superseded
Headers show
Series serial: msm-geni: fix UART baudrate on modern platforms | expand

Commit Message

Vladimir Zapolskiy April 12, 2023, 2:30 p.m. UTC 
This a cosmetic change, which corrects code indentation in a few places.

Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/serial/serial_msm_geni.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/serial/serial_msm_geni.c b/drivers/serial/serial_msm_geni.c
index 8fd769eb4d0d..55dd9188a56c 100644
--- a/drivers/serial/serial_msm_geni.c
+++ b/drivers/serial/serial_msm_geni.c
@@ -130,8 +130,8 @@  struct msm_serial_data {
 };
 
 unsigned long root_freq[] = {7372800,  14745600, 19200000, 29491200,
-					 32000000, 48000000, 64000000, 80000000,
-					 96000000, 100000000};
+			     32000000, 48000000, 64000000, 80000000,
+			     96000000, 100000000};
 
 /**
  * get_clk_cfg() - Get clock rate to apply on clock supplier.
@@ -160,8 +160,7 @@  static int get_clk_cfg(unsigned long clk_freq)
  *
  * Return: frequency, supported by clock supplier, multiple of clk_freq.
  */
-static int get_clk_div_rate(u32 baud,
-							u64 sampling_rate, u32 *clk_div)
+static int get_clk_div_rate(u32 baud, u64 sampling_rate, u32 *clk_div)
 {
 	unsigned long ser_clk;
 	unsigned long desired_clk;
@@ -228,7 +227,7 @@  static inline u32 geni_se_get_tx_fifo_width(long base)
 }
 
 static inline void geni_serial_baud(phys_addr_t base_address, u32 clk_div,
-									int baud)
+				    int baud)
 {
 	u32 s_clk_cfg = 0;
 
@@ -268,7 +267,7 @@  int msm_serial_setbrg(struct udevice *dev, int baud)
  * reached.
  */
 static bool qcom_geni_serial_poll_bit(const struct udevice *dev, int offset,
-					  int field, bool set)
+				      int field, bool set)
 {
 	u32 reg;
 	struct msm_serial_data *priv = dev_get_priv(dev);