| Message ID | 20230412153310.241046-8-angelogioacchino.delregno@collabora.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support for MT6331 and MT6332 LEDs | expand |
Hi! > Add basic code to turn on and off WLEDs and wire up MT6332 support > to take advantage of it. > This is a simple approach due to to the aforementioned PMIC supporting > only on/off status so, at the time of writing, it is impossible for me > to validate more advanced functionality due to lack of hardware. > @@ -467,14 +590,24 @@ static int mt6323_led_probe(struct platform_device *pdev) > goto put_child_node; > } > > + is_wled = of_property_read_bool(child, "mediatek,is-wled"); > + This needs documenting in the binding, no? > +static const struct mt6323_hwspec mt6332_spec = { > + /* There are no LEDs in MT6332. Only WLEDs are present. */ "Only WLED is present"? > + .max_leds = 0, > + .max_wleds = 1, > + .max_brightness = 1024, > +}; > + Is there chip with both LED and WLEDs? (I'm wondering if this makes sense in single driver). Best regards, Pavel
Il 13/04/23 13:06, Pavel Machek ha scritto: > Hi! > >> Add basic code to turn on and off WLEDs and wire up MT6332 support >> to take advantage of it. >> This is a simple approach due to to the aforementioned PMIC supporting >> only on/off status so, at the time of writing, it is impossible for me >> to validate more advanced functionality due to lack of hardware. > > >> @@ -467,14 +590,24 @@ static int mt6323_led_probe(struct platform_device *pdev) >> goto put_child_node; >> } >> >> + is_wled = of_property_read_bool(child, "mediatek,is-wled"); >> + > > This needs documenting in the binding, no? > >> +static const struct mt6323_hwspec mt6332_spec = { >> + /* There are no LEDs in MT6332. Only WLEDs are present. */ > > "Only WLED is present"? > >> + .max_leds = 0, >> + .max_wleds = 1, >> + .max_brightness = 1024, >> +}; >> + > > Is there chip with both LED and WLEDs? (I'm wondering if this makes > sense in single driver). > Some PMICs have got both LED(s) and WLED(s), yes - this is only on smartphone designs though. Regards, Angelo
Il 13/04/23 13:06, Pavel Machek ha scritto: > Hi! > >> Add basic code to turn on and off WLEDs and wire up MT6332 support >> to take advantage of it. >> This is a simple approach due to to the aforementioned PMIC supporting >> only on/off status so, at the time of writing, it is impossible for me >> to validate more advanced functionality due to lack of hardware. > > >> @@ -467,14 +590,24 @@ static int mt6323_led_probe(struct platform_device *pdev) >> goto put_child_node; >> } >> >> + is_wled = of_property_read_bool(child, "mediatek,is-wled"); >> + > > This needs documenting in the binding, no? Yes, and I forgot to. Would it be okay if I send a supplementary patch out of this series to document that since the bindings are already acked? Regards, Angelo
On 12/04/2023 17:33, AngeloGioacchino Del Regno wrote: > Add basic code to turn on and off WLEDs and wire up MT6332 support > to take advantage of it. > This is a simple approach due to to the aforementioned PMIC supporting > only on/off status so, at the time of writing, it is impossible for me > to validate more advanced functionality due to lack of hardware. > > Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > --- > drivers/leds/leds-mt6323.c | 171 +++++++++++++++++++++++++++++++++++-- > 1 file changed, 164 insertions(+), 7 deletions(-) > > diff --git a/drivers/leds/leds-mt6323.c b/drivers/leds/leds-mt6323.c > index 5d95dbd9a761..202b38ac32f6 100644 > --- a/drivers/leds/leds-mt6323.c > +++ b/drivers/leds/leds-mt6323.c > @@ -20,6 +20,11 @@ > #define RG_DRV_32K_CK_PDN BIT(11) > #define RG_DRV_32K_CK_PDN_MASK BIT(11) > > +/* 32K/1M/6M clock common for WLED device */ > +#define RG_VWLED_1M_CK_PDN BIT(0) > +#define RG_VWLED_32K_CK_PDN BIT(12) > +#define RG_VWLED_6M_CK_PDN BIT(13) > + > /* > * Register field for TOP_CKPDN2 to enable > * individual clock for LED device. > @@ -73,7 +78,7 @@ struct mt6323_led { > int id; > struct mt6323_leds *parent; > struct led_classdev cdev; > - enum led_brightness current_brightness; > + unsigned int current_brightness; > }; > > /** > @@ -86,6 +91,7 @@ struct mt6323_led { > * @num_isink_con: Number of ISINKx_CON registers > * @isink_max_regs: Number of ISINK[0..x] registers > * @isink_en_ctrl: Offset to ISINK_EN_CTRL register > + * @iwled_en_ctrl: Offset to IWLED_EN_CTRL register > */ > struct mt6323_regs { > const u16 *top_ckpdn; > @@ -96,18 +102,21 @@ struct mt6323_regs { > u8 num_isink_con; > u8 isink_max_regs; > u16 isink_en_ctrl; > + u16 iwled_en_ctrl; > }; > > /** > * struct mt6323_hwspec - hardware specific parameters > * @max_period: Maximum period for all LEDs > * @max_leds: Maximum number of supported LEDs > + * @max_wleds: Maximum number of WLEDs > * @max_brightness: Maximum brightness for all LEDs > * @unit_duty: Steps of duty per period > */ > struct mt6323_hwspec { > u16 max_period; > u8 max_leds; > + u8 max_wleds; > u16 max_brightness; > u16 unit_duty; > }; > @@ -379,6 +388,117 @@ static int mt6323_led_set_brightness(struct led_classdev *cdev, > return ret; > } > > +static int mtk_wled_hw_on(struct led_classdev *cdev) > +{ > + struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev); > + struct mt6323_leds *leds = led->parent; > + const struct mt6323_regs *regs = leds->pdata->regs; > + struct regmap *regmap = leds->hw->regmap; > + int ret; > + > + ret = regmap_clear_bits(regmap, regs->top_ckpdn[0], RG_VWLED_32K_CK_PDN); > + if (ret) > + return ret; > + > + ret = regmap_clear_bits(regmap, regs->top_ckpdn[0], RG_VWLED_6M_CK_PDN); > + if (ret) > + return ret; > + > + ret = regmap_clear_bits(regmap, regs->top_ckpdn[0], RG_VWLED_1M_CK_PDN); > + if (ret) > + return ret; > + > + usleep_range(5000, 6000); > + > + /* Enable WLED channel pair */ > + ret = regmap_set_bits(regmap, regs->iwled_en_ctrl, BIT(led->id)); > + if (ret) > + return ret; > + > + ret = regmap_set_bits(regmap, regs->iwled_en_ctrl, BIT(led->id + 1)); > + if (ret) > + return ret; > + > + return 0; > +} > + > +static int mtk_wled_hw_off(struct led_classdev *cdev) > +{ > + struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev); > + struct mt6323_leds *leds = led->parent; > + const struct mt6323_regs *regs = leds->pdata->regs; > + struct regmap *regmap = leds->hw->regmap; > + int ret; > + > + ret = regmap_clear_bits(regmap, regs->iwled_en_ctrl, BIT(led->id + 1)); > + if (ret) > + return ret; > + > + ret = regmap_clear_bits(regmap, regs->iwled_en_ctrl, BIT(led->id)); > + if (ret) > + return ret; > + > + ret = regmap_set_bits(regmap, regs->top_ckpdn[0], RG_VWLED_32K_CK_PDN); > + if (ret) > + return ret; > + > + ret = regmap_set_bits(regmap, regs->top_ckpdn[0], RG_VWLED_6M_CK_PDN); > + if (ret) > + return ret; > + > + ret = regmap_set_bits(regmap, regs->top_ckpdn[0], RG_VWLED_1M_CK_PDN); > + if (ret) > + return ret; > + > + return 0; > +} > + > +static unsigned int mt6323_get_wled_brightness(struct led_classdev *cdev) > +{ > + struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev); > + struct mt6323_leds *leds = led->parent; > + const struct mt6323_regs *regs = leds->pdata->regs; > + struct regmap *regmap = leds->hw->regmap; > + unsigned int status; > + int ret; > + > + ret = regmap_read(regmap, regs->iwled_en_ctrl, &status); > + if (ret) > + return 0; > + > + /* Always two channels per WLED */ > + status &= BIT(led->id) | BIT(led->id + 1); > + > + return status ? led->current_brightness : 0; > +} > + > +static int mt6323_wled_set_brightness(struct led_classdev *cdev, > + unsigned int brightness) > +{ > + struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev); > + struct mt6323_leds *leds = led->parent; > + int ret = 0; > + > + mutex_lock(&leds->lock); > + > + if (brightness) { > + if (!led->current_brightness) > + ret = mtk_wled_hw_on(cdev); > + if (ret) > + goto out; > + } else { > + ret = mtk_wled_hw_off(cdev); > + if (ret) > + goto out; > + } > + > + led->current_brightness = brightness; > +out: > + mutex_unlock(&leds->lock); > + > + return ret; > +} > + > static int mt6323_led_set_dt_default(struct led_classdev *cdev, > struct device_node *np) > { > @@ -418,6 +538,7 @@ static int mt6323_led_probe(struct platform_device *pdev) > int ret; > unsigned int status; > u32 reg; > + u8 max_leds; > > leds = devm_kzalloc(dev, sizeof(*leds), GFP_KERNEL); > if (!leds) > @@ -428,6 +549,7 @@ static int mt6323_led_probe(struct platform_device *pdev) > leds->pdata = device_get_match_data(dev); > regs = leds->pdata->regs; > spec = leds->pdata->spec; > + max_leds = spec->max_leds + spec->max_wleds; I haven't access to the datasheet so I have to ask you: Why the max leds value is the addition of max led and wled ? IMO, the datasheed give you the max supported led OR wled on its bus function to the maximum supplied current by the PMIC (I assume LED or WLED have different need). Or the PMIC has 2 bus, one for led and another for wled ? > > /* > * leds->hw points to the underlying bus for the register > @@ -447,6 +569,7 @@ static int mt6323_led_probe(struct platform_device *pdev) > > for_each_available_child_of_node(np, child) { > struct led_init_data init_data = {}; > + bool is_wled; > > ret = of_property_read_u32(child, "reg", ®); > if (ret) { > @@ -454,7 +577,7 @@ static int mt6323_led_probe(struct platform_device *pdev) > goto put_child_node; > } > > - if (reg >= spec->max_leds || reg >= MAX_SUPPORTED_LEDS || > + if (reg >= max_leds || reg >= MAX_SUPPORTED_LEDS || > leds->led[reg]) { > dev_err(dev, "Invalid led reg %u\n", reg); > ret = -EINVAL; > @@ -467,14 +590,24 @@ static int mt6323_led_probe(struct platform_device *pdev) > goto put_child_node; > } > > + is_wled = of_property_read_bool(child, "mediatek,is-wled"); > + > leds->led[reg] = led; > leds->led[reg]->id = reg; > leds->led[reg]->cdev.max_brightness = spec->max_brightness; > - leds->led[reg]->cdev.brightness_set_blocking = > - mt6323_led_set_brightness; > - leds->led[reg]->cdev.blink_set = mt6323_led_set_blink; > - leds->led[reg]->cdev.brightness_get = > - mt6323_get_led_hw_brightness; > + > + if (is_wled) { > + leds->led[reg]->cdev.brightness_set_blocking = > + mt6323_wled_set_brightness; > + leds->led[reg]->cdev.brightness_get = > + mt6323_get_wled_brightness; > + } else { > + leds->led[reg]->cdev.brightness_set_blocking = > + mt6323_led_set_brightness; > + leds->led[reg]->cdev.blink_set = mt6323_led_set_blink; > + leds->led[reg]->cdev.brightness_get = > + mt6323_get_led_hw_brightness; > + } > leds->led[reg]->parent = leds; > > ret = mt6323_led_set_dt_default(&leds->led[reg]->cdev, child); > @@ -542,6 +675,17 @@ static const struct mt6323_regs mt6331_registers = { > .isink_en_ctrl = 0x43a, > }; > > +static const struct mt6323_regs mt6332_registers = { > + .top_ckpdn = (const u16[]){ 0x8094, 0x809a, 0x80a0 }, > + .num_top_ckpdn = 3, > + .top_ckcon = (const u16[]){ 0x80a6, 0x80ac }, > + .num_top_ckcon = 2, > + .isink_con = (const u16[]){ 0x8cd4 }, > + .num_isink_con = 1, > + .isink_max_regs = 12, /* IWLED[0..2, 3..9] */ > + .iwled_en_ctrl = 0x8cda, > +}; > + > static const struct mt6323_hwspec mt6323_spec = { > .max_period = 10000, > .max_leds = 4, > @@ -549,6 +693,13 @@ static const struct mt6323_hwspec mt6323_spec = { > .unit_duty = 3125, > }; > > +static const struct mt6323_hwspec mt6332_spec = { > + /* There are no LEDs in MT6332. Only WLEDs are present. */ > + .max_leds = 0, > + .max_wleds = 1, > + .max_brightness = 1024, > +}; > + > static const struct mt6323_data mt6323_pdata = { > .regs = &mt6323_registers, > .spec = &mt6323_spec, > @@ -559,9 +710,15 @@ static const struct mt6323_data mt6331_pdata = { > .spec = &mt6323_spec, > }; > > +static const struct mt6323_data mt6332_pdata = { > + .regs = &mt6332_registers, > + .spec = &mt6332_spec, > +}; > + > static const struct of_device_id mt6323_led_dt_match[] = { > { .compatible = "mediatek,mt6323-led", .data = &mt6323_pdata}, > { .compatible = "mediatek,mt6331-led", .data = &mt6331_pdata }, > + { .compatible = "mediatek,mt6332-led", .data = &mt6332_pdata }, > {}, > }; > MODULE_DEVICE_TABLE(of, mt6323_led_dt_match);
On Thu, 13 Apr 2023, AngeloGioacchino Del Regno wrote: > Il 13/04/23 13:06, Pavel Machek ha scritto: > > Hi! > > > > > Add basic code to turn on and off WLEDs and wire up MT6332 support > > > to take advantage of it. > > > This is a simple approach due to to the aforementioned PMIC supporting > > > only on/off status so, at the time of writing, it is impossible for me > > > to validate more advanced functionality due to lack of hardware. > > > > > > > @@ -467,14 +590,24 @@ static int mt6323_led_probe(struct platform_device *pdev) > > > goto put_child_node; > > > } > > > + is_wled = of_property_read_bool(child, "mediatek,is-wled"); > > > + > > > > This needs documenting in the binding, no? > > Yes, and I forgot to. Would it be okay if I send a supplementary patch out > of this series to document that since the bindings are already acked? You can add the support as part of a new patch. Please resend this series with it attached. -- Lee Jones [李琼斯]
Il 14/04/23 09:07, Lee Jones ha scritto: > On Thu, 13 Apr 2023, AngeloGioacchino Del Regno wrote: > >> Il 13/04/23 13:06, Pavel Machek ha scritto: >>> Hi! >>> >>>> Add basic code to turn on and off WLEDs and wire up MT6332 support >>>> to take advantage of it. >>>> This is a simple approach due to to the aforementioned PMIC supporting >>>> only on/off status so, at the time of writing, it is impossible for me >>>> to validate more advanced functionality due to lack of hardware. >>> >>> >>>> @@ -467,14 +590,24 @@ static int mt6323_led_probe(struct platform_device *pdev) >>>> goto put_child_node; >>>> } >>>> + is_wled = of_property_read_bool(child, "mediatek,is-wled"); >>>> + >>> >>> This needs documenting in the binding, no? >> >> Yes, and I forgot to. Would it be okay if I send a supplementary patch out >> of this series to document that since the bindings are already acked? > > You can add the support as part of a new patch. > > Please resend this series with it attached. > Perfect - will do! Thanks, Angelo
Il 13/04/23 16:15, Alexandre Mergnat ha scritto: > On 12/04/2023 17:33, AngeloGioacchino Del Regno wrote: >> Add basic code to turn on and off WLEDs and wire up MT6332 support >> to take advantage of it. >> This is a simple approach due to to the aforementioned PMIC supporting >> only on/off status so, at the time of writing, it is impossible for me >> to validate more advanced functionality due to lack of hardware. >> >> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> >> --- >> drivers/leds/leds-mt6323.c | 171 +++++++++++++++++++++++++++++++++++-- >> 1 file changed, 164 insertions(+), 7 deletions(-) >> >> diff --git a/drivers/leds/leds-mt6323.c b/drivers/leds/leds-mt6323.c >> index 5d95dbd9a761..202b38ac32f6 100644 >> --- a/drivers/leds/leds-mt6323.c >> +++ b/drivers/leds/leds-mt6323.c ..snip.. >> @@ -418,6 +538,7 @@ static int mt6323_led_probe(struct platform_device *pdev) >> int ret; >> unsigned int status; >> u32 reg; >> + u8 max_leds; >> leds = devm_kzalloc(dev, sizeof(*leds), GFP_KERNEL); >> if (!leds) >> @@ -428,6 +549,7 @@ static int mt6323_led_probe(struct platform_device *pdev) >> leds->pdata = device_get_match_data(dev); >> regs = leds->pdata->regs; >> spec = leds->pdata->spec; >> + max_leds = spec->max_leds + spec->max_wleds; > > I haven't access to the datasheet so I have to ask you: > Why the max leds value is the addition of max led and wled ? > > IMO, the datasheed give you the max supported led OR wled on its bus function to > the maximum supplied current by the PMIC (I assume LED or WLED have different > need). Or the PMIC has 2 bus, one for led and another for wled ? > I don't have access to the datasheet for MT6332 as well - but anyway, the only purpose of the max_leds variable is to validate the maximum number of 'reg' spaces that we're supposed to read from devicetree, that's all. The alternative would've been to check if there's any led, then any wled in the mt6323_hwspec from platform data - then: if only wleds, max_leds = wleds; else if only leds, max_leds = leds; else if leds and wleds, max_leds = leds + wleds; You see that it doesn't make any sense to do such check, and we can go with just adding wleds+leds. Regards, Angelo
diff --git a/drivers/leds/leds-mt6323.c b/drivers/leds/leds-mt6323.c index 5d95dbd9a761..202b38ac32f6 100644 --- a/drivers/leds/leds-mt6323.c +++ b/drivers/leds/leds-mt6323.c @@ -20,6 +20,11 @@ #define RG_DRV_32K_CK_PDN BIT(11) #define RG_DRV_32K_CK_PDN_MASK BIT(11) +/* 32K/1M/6M clock common for WLED device */ +#define RG_VWLED_1M_CK_PDN BIT(0) +#define RG_VWLED_32K_CK_PDN BIT(12) +#define RG_VWLED_6M_CK_PDN BIT(13) + /* * Register field for TOP_CKPDN2 to enable * individual clock for LED device. @@ -73,7 +78,7 @@ struct mt6323_led { int id; struct mt6323_leds *parent; struct led_classdev cdev; - enum led_brightness current_brightness; + unsigned int current_brightness; }; /** @@ -86,6 +91,7 @@ struct mt6323_led { * @num_isink_con: Number of ISINKx_CON registers * @isink_max_regs: Number of ISINK[0..x] registers * @isink_en_ctrl: Offset to ISINK_EN_CTRL register + * @iwled_en_ctrl: Offset to IWLED_EN_CTRL register */ struct mt6323_regs { const u16 *top_ckpdn; @@ -96,18 +102,21 @@ struct mt6323_regs { u8 num_isink_con; u8 isink_max_regs; u16 isink_en_ctrl; + u16 iwled_en_ctrl; }; /** * struct mt6323_hwspec - hardware specific parameters * @max_period: Maximum period for all LEDs * @max_leds: Maximum number of supported LEDs + * @max_wleds: Maximum number of WLEDs * @max_brightness: Maximum brightness for all LEDs * @unit_duty: Steps of duty per period */ struct mt6323_hwspec { u16 max_period; u8 max_leds; + u8 max_wleds; u16 max_brightness; u16 unit_duty; }; @@ -379,6 +388,117 @@ static int mt6323_led_set_brightness(struct led_classdev *cdev, return ret; } +static int mtk_wled_hw_on(struct led_classdev *cdev) +{ + struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev); + struct mt6323_leds *leds = led->parent; + const struct mt6323_regs *regs = leds->pdata->regs; + struct regmap *regmap = leds->hw->regmap; + int ret; + + ret = regmap_clear_bits(regmap, regs->top_ckpdn[0], RG_VWLED_32K_CK_PDN); + if (ret) + return ret; + + ret = regmap_clear_bits(regmap, regs->top_ckpdn[0], RG_VWLED_6M_CK_PDN); + if (ret) + return ret; + + ret = regmap_clear_bits(regmap, regs->top_ckpdn[0], RG_VWLED_1M_CK_PDN); + if (ret) + return ret; + + usleep_range(5000, 6000); + + /* Enable WLED channel pair */ + ret = regmap_set_bits(regmap, regs->iwled_en_ctrl, BIT(led->id)); + if (ret) + return ret; + + ret = regmap_set_bits(regmap, regs->iwled_en_ctrl, BIT(led->id + 1)); + if (ret) + return ret; + + return 0; +} + +static int mtk_wled_hw_off(struct led_classdev *cdev) +{ + struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev); + struct mt6323_leds *leds = led->parent; + const struct mt6323_regs *regs = leds->pdata->regs; + struct regmap *regmap = leds->hw->regmap; + int ret; + + ret = regmap_clear_bits(regmap, regs->iwled_en_ctrl, BIT(led->id + 1)); + if (ret) + return ret; + + ret = regmap_clear_bits(regmap, regs->iwled_en_ctrl, BIT(led->id)); + if (ret) + return ret; + + ret = regmap_set_bits(regmap, regs->top_ckpdn[0], RG_VWLED_32K_CK_PDN); + if (ret) + return ret; + + ret = regmap_set_bits(regmap, regs->top_ckpdn[0], RG_VWLED_6M_CK_PDN); + if (ret) + return ret; + + ret = regmap_set_bits(regmap, regs->top_ckpdn[0], RG_VWLED_1M_CK_PDN); + if (ret) + return ret; + + return 0; +} + +static unsigned int mt6323_get_wled_brightness(struct led_classdev *cdev) +{ + struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev); + struct mt6323_leds *leds = led->parent; + const struct mt6323_regs *regs = leds->pdata->regs; + struct regmap *regmap = leds->hw->regmap; + unsigned int status; + int ret; + + ret = regmap_read(regmap, regs->iwled_en_ctrl, &status); + if (ret) + return 0; + + /* Always two channels per WLED */ + status &= BIT(led->id) | BIT(led->id + 1); + + return status ? led->current_brightness : 0; +} + +static int mt6323_wled_set_brightness(struct led_classdev *cdev, + unsigned int brightness) +{ + struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev); + struct mt6323_leds *leds = led->parent; + int ret = 0; + + mutex_lock(&leds->lock); + + if (brightness) { + if (!led->current_brightness) + ret = mtk_wled_hw_on(cdev); + if (ret) + goto out; + } else { + ret = mtk_wled_hw_off(cdev); + if (ret) + goto out; + } + + led->current_brightness = brightness; +out: + mutex_unlock(&leds->lock); + + return ret; +} + static int mt6323_led_set_dt_default(struct led_classdev *cdev, struct device_node *np) { @@ -418,6 +538,7 @@ static int mt6323_led_probe(struct platform_device *pdev) int ret; unsigned int status; u32 reg; + u8 max_leds; leds = devm_kzalloc(dev, sizeof(*leds), GFP_KERNEL); if (!leds) @@ -428,6 +549,7 @@ static int mt6323_led_probe(struct platform_device *pdev) leds->pdata = device_get_match_data(dev); regs = leds->pdata->regs; spec = leds->pdata->spec; + max_leds = spec->max_leds + spec->max_wleds; /* * leds->hw points to the underlying bus for the register @@ -447,6 +569,7 @@ static int mt6323_led_probe(struct platform_device *pdev) for_each_available_child_of_node(np, child) { struct led_init_data init_data = {}; + bool is_wled; ret = of_property_read_u32(child, "reg", ®); if (ret) { @@ -454,7 +577,7 @@ static int mt6323_led_probe(struct platform_device *pdev) goto put_child_node; } - if (reg >= spec->max_leds || reg >= MAX_SUPPORTED_LEDS || + if (reg >= max_leds || reg >= MAX_SUPPORTED_LEDS || leds->led[reg]) { dev_err(dev, "Invalid led reg %u\n", reg); ret = -EINVAL; @@ -467,14 +590,24 @@ static int mt6323_led_probe(struct platform_device *pdev) goto put_child_node; } + is_wled = of_property_read_bool(child, "mediatek,is-wled"); + leds->led[reg] = led; leds->led[reg]->id = reg; leds->led[reg]->cdev.max_brightness = spec->max_brightness; - leds->led[reg]->cdev.brightness_set_blocking = - mt6323_led_set_brightness; - leds->led[reg]->cdev.blink_set = mt6323_led_set_blink; - leds->led[reg]->cdev.brightness_get = - mt6323_get_led_hw_brightness; + + if (is_wled) { + leds->led[reg]->cdev.brightness_set_blocking = + mt6323_wled_set_brightness; + leds->led[reg]->cdev.brightness_get = + mt6323_get_wled_brightness; + } else { + leds->led[reg]->cdev.brightness_set_blocking = + mt6323_led_set_brightness; + leds->led[reg]->cdev.blink_set = mt6323_led_set_blink; + leds->led[reg]->cdev.brightness_get = + mt6323_get_led_hw_brightness; + } leds->led[reg]->parent = leds; ret = mt6323_led_set_dt_default(&leds->led[reg]->cdev, child); @@ -542,6 +675,17 @@ static const struct mt6323_regs mt6331_registers = { .isink_en_ctrl = 0x43a, }; +static const struct mt6323_regs mt6332_registers = { + .top_ckpdn = (const u16[]){ 0x8094, 0x809a, 0x80a0 }, + .num_top_ckpdn = 3, + .top_ckcon = (const u16[]){ 0x80a6, 0x80ac }, + .num_top_ckcon = 2, + .isink_con = (const u16[]){ 0x8cd4 }, + .num_isink_con = 1, + .isink_max_regs = 12, /* IWLED[0..2, 3..9] */ + .iwled_en_ctrl = 0x8cda, +}; + static const struct mt6323_hwspec mt6323_spec = { .max_period = 10000, .max_leds = 4, @@ -549,6 +693,13 @@ static const struct mt6323_hwspec mt6323_spec = { .unit_duty = 3125, }; +static const struct mt6323_hwspec mt6332_spec = { + /* There are no LEDs in MT6332. Only WLEDs are present. */ + .max_leds = 0, + .max_wleds = 1, + .max_brightness = 1024, +}; + static const struct mt6323_data mt6323_pdata = { .regs = &mt6323_registers, .spec = &mt6323_spec, @@ -559,9 +710,15 @@ static const struct mt6323_data mt6331_pdata = { .spec = &mt6323_spec, }; +static const struct mt6323_data mt6332_pdata = { + .regs = &mt6332_registers, + .spec = &mt6332_spec, +}; + static const struct of_device_id mt6323_led_dt_match[] = { { .compatible = "mediatek,mt6323-led", .data = &mt6323_pdata}, { .compatible = "mediatek,mt6331-led", .data = &mt6331_pdata }, + { .compatible = "mediatek,mt6332-led", .data = &mt6332_pdata }, {}, }; MODULE_DEVICE_TABLE(of, mt6323_led_dt_match);
Add basic code to turn on and off WLEDs and wire up MT6332 support to take advantage of it. This is a simple approach due to to the aforementioned PMIC supporting only on/off status so, at the time of writing, it is impossible for me to validate more advanced functionality due to lack of hardware. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> --- drivers/leds/leds-mt6323.c | 171 +++++++++++++++++++++++++++++++++++-- 1 file changed, 164 insertions(+), 7 deletions(-)