diff mbox series

[v3,2/2] thermal: mediatek: change clk_prepare_enable to devm_clk_get_enabled in mtk_thermal_probe

Message ID 20230411063531.3976354-2-void0red@hust.edu.cn
State New
Headers show
Series [v3,1/2] thermal: mediatek: use devm_of_iomap to avoid resource leak in mtk_thermal_probe | expand

Commit Message

Kang Chen April 11, 2023, 6:35 a.m. UTC
use devm_clk_get_enabled to do automatic resource management.
Meanwhile, remove error handling labels in the probe function and
the whole remove function.

Signed-off-by: Kang Chen <void0red@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
---
v3 -> v2: remove some useles func calls.
v2 -> v1: init

Notice the devm_clk_get_enabled do the clk_get and clk_prepare_enable
at the same time.
I'm not sure if this has any side effects in initialization.

 drivers/thermal/mediatek/auxadc_thermal.c | 48 +++++------------------
 1 file changed, 10 insertions(+), 38 deletions(-)

Comments

Kang Chen April 15, 2023, 7:14 a.m. UTC | #1
> -----Original Messages-----
> From: "Kang Chen" <void0red@hust.edu.cn>
> Sent Time: 2023-04-11 14:35:31 (Tuesday)
> To: daniel.lezcano@linaro.org
> Cc: amitk@kernel.org, angelogioacchino.delregno@collabora.com, bchihi@baylibre.com, daniel@makrotopia.org, dzm91@hust.edu.cn, error27@gmail.com, henry.yen@mediatek.com, hust-os-kernel-patches@googlegroups.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org, linux-pm@vger.kernel.org, matthias.bgg@gmail.com, rafael@kernel.org, rdunlap@infradead.org, rui.zhang@intel.com, void0red@gmail.com, void0red@hust.edu.cn
> Subject: [PATCH v3 2/2] thermal: mediatek: change clk_prepare_enable to devm_clk_get_enabled in mtk_thermal_probe
> 
> use devm_clk_get_enabled to do automatic resource management.
> Meanwhile, remove error handling labels in the probe function and
> the whole remove function.
> 
> Signed-off-by: Kang Chen <void0red@hust.edu.cn>
> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
> ---
> v3 -> v2: remove some useles func calls.
> v2 -> v1: init
> 
> Notice the devm_clk_get_enabled do the clk_get and clk_prepare_enable
> at the same time.
> I'm not sure if this has any side effects in initialization.
> 
>  drivers/thermal/mediatek/auxadc_thermal.c | 48 +++++------------------
>  1 file changed, 10 insertions(+), 38 deletions(-)
> 
> diff --git a/drivers/thermal/mediatek/auxadc_thermal.c b/drivers/thermal/mediatek/auxadc_thermal.c
> index 3372f7c29626..995837ce3ea2 100644
> --- a/drivers/thermal/mediatek/auxadc_thermal.c
> +++ b/drivers/thermal/mediatek/auxadc_thermal.c
> @@ -1116,14 +1116,6 @@ static int mtk_thermal_probe(struct platform_device *pdev)
>  
>  	mt->conf = of_device_get_match_data(&pdev->dev);
>  
> -	mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm");
> -	if (IS_ERR(mt->clk_peri_therm))
> -		return PTR_ERR(mt->clk_peri_therm);
> -
> -	mt->clk_auxadc = devm_clk_get(&pdev->dev, "auxadc");
> -	if (IS_ERR(mt->clk_auxadc))
> -		return PTR_ERR(mt->clk_auxadc);
> -
>  	mt->thermal_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
>  	if (IS_ERR(mt->thermal_base))
>  		return PTR_ERR(mt->thermal_base);
> @@ -1182,16 +1174,16 @@ static int mtk_thermal_probe(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
>  
> -	ret = clk_prepare_enable(mt->clk_auxadc);
> -	if (ret) {
> -		dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", ret);
> -		return ret;
> +	mt->clk_auxadc = devm_clk_get_enabled(&pdev->dev, "auxadc");
> +	if (IS_ERR(mt->clk_auxadc)) {
> +		dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", mt->clk_auxadc);
> +		return PTR_ERR(mt->clk_auxadc);
>  	}
>  
> -	ret = clk_prepare_enable(mt->clk_peri_therm);
> -	if (ret) {
> -		dev_err(&pdev->dev, "Can't enable peri clk: %d\n", ret);
> -		goto err_disable_clk_auxadc;
> +	mt->clk_peri_therm = devm_clk_get_enabled(&pdev->dev, "therm");
> +	if (IS_ERR(mt->clk_peri_therm)) {
> +		dev_err(&pdev->dev, "Can't enable peri clk: %d\n", mt->clk_peri_therm);
> +		return PTR_ERR(mt->clk_peri_therm);
>  	}
>  
>  	if (mt->conf->version != MTK_THERMAL_V1) {
> @@ -1215,38 +1207,18 @@ static int mtk_thermal_probe(struct platform_device *pdev)
>  
>  	tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
>  					      &mtk_thermal_ops);
> -	if (IS_ERR(tzdev)) {
> -		ret = PTR_ERR(tzdev);
> -		goto err_disable_clk_peri_therm;
> -	}
> +	if (IS_ERR(tzdev))
> +		return PTR_ERR(tzdev);
>  
>  	ret = devm_thermal_add_hwmon_sysfs(tzdev);
>  	if (ret)
>  		dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs");
>  
>  	return 0;
> -
> -err_disable_clk_peri_therm:
> -	clk_disable_unprepare(mt->clk_peri_therm);
> -err_disable_clk_auxadc:
> -	clk_disable_unprepare(mt->clk_auxadc);
> -
> -	return ret;
> -}
> -
> -static int mtk_thermal_remove(struct platform_device *pdev)
> -{
> -	struct mtk_thermal *mt = platform_get_drvdata(pdev);
> -
> -	clk_disable_unprepare(mt->clk_peri_therm);
> -	clk_disable_unprepare(mt->clk_auxadc);
> -
> -	return 0;
>  }
>  
>  static struct platform_driver mtk_thermal_driver = {
>  	.probe = mtk_thermal_probe,
> -	.remove = mtk_thermal_remove,
>  	.driver = {
>  		.name = "mtk-thermal",
>  		.of_match_table = mtk_thermal_of_match,
> -- 
> 2.34.1

ping?
Daniel Lezcano April 17, 2023, 9:52 a.m. UTC | #2
Hi,

this patch does not apply:

Analyzing 9 messages in the thread
Will use the latest revision: v3
You can pick other revisions using the -vN flag
Checking attestation on all messages, may take a moment...
---
   [PATCH v3 2/2] thermal: mediatek: change clk_prepare_enable to 
devm_clk_get_enabled in mtk_thermal_probe
     + Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
     + Link: 
https://lore.kernel.org/r/20230411063531.3976354-2-void0red@hust.edu.cn
---
Total patches: 1 (cherrypicked: 2)
---
  Link: 
https://lore.kernel.org/r/20230411063531.3976354-1-void0red@hust.edu.cn
  Base: not specified
Applying: thermal: mediatek: change clk_prepare_enable to 
devm_clk_get_enabled in mtk_thermal_probe
error: patch failed: drivers/thermal/mediatek/auxadc_thermal.c:1182
error: drivers/thermal/mediatek/auxadc_thermal.c: patch does not apply
Patch failed at 0001 thermal: mediatek: change clk_prepare_enable to 
devm_clk_get_enabled in mtk_thermal_probe
hint: Use 'git am --show-current-patch=diff' to see the failed patch
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".



On 15/04/2023 09:14, void0red@hust.edu.cn wrote:
> 
> 
> 
>> -----Original Messages-----
>> From: "Kang Chen" <void0red@hust.edu.cn>
>> Sent Time: 2023-04-11 14:35:31 (Tuesday)
>> To: daniel.lezcano@linaro.org
>> Cc: amitk@kernel.org, angelogioacchino.delregno@collabora.com, bchihi@baylibre.com, daniel@makrotopia.org, dzm91@hust.edu.cn, error27@gmail.com, henry.yen@mediatek.com, hust-os-kernel-patches@googlegroups.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org, linux-pm@vger.kernel.org, matthias.bgg@gmail.com, rafael@kernel.org, rdunlap@infradead.org, rui.zhang@intel.com, void0red@gmail.com, void0red@hust.edu.cn
>> Subject: [PATCH v3 2/2] thermal: mediatek: change clk_prepare_enable to devm_clk_get_enabled in mtk_thermal_probe
>>
>> use devm_clk_get_enabled to do automatic resource management.
>> Meanwhile, remove error handling labels in the probe function and
>> the whole remove function.
>>
>> Signed-off-by: Kang Chen <void0red@hust.edu.cn>
>> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
>> ---
>> v3 -> v2: remove some useles func calls.
>> v2 -> v1: init
>>
>> Notice the devm_clk_get_enabled do the clk_get and clk_prepare_enable
>> at the same time.
>> I'm not sure if this has any side effects in initialization.
>>
>>   drivers/thermal/mediatek/auxadc_thermal.c | 48 +++++------------------
>>   1 file changed, 10 insertions(+), 38 deletions(-)
>>
>> diff --git a/drivers/thermal/mediatek/auxadc_thermal.c b/drivers/thermal/mediatek/auxadc_thermal.c
>> index 3372f7c29626..995837ce3ea2 100644
>> --- a/drivers/thermal/mediatek/auxadc_thermal.c
>> +++ b/drivers/thermal/mediatek/auxadc_thermal.c
>> @@ -1116,14 +1116,6 @@ static int mtk_thermal_probe(struct platform_device *pdev)
>>   
>>   	mt->conf = of_device_get_match_data(&pdev->dev);
>>   
>> -	mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm");
>> -	if (IS_ERR(mt->clk_peri_therm))
>> -		return PTR_ERR(mt->clk_peri_therm);
>> -
>> -	mt->clk_auxadc = devm_clk_get(&pdev->dev, "auxadc");
>> -	if (IS_ERR(mt->clk_auxadc))
>> -		return PTR_ERR(mt->clk_auxadc);
>> -
>>   	mt->thermal_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
>>   	if (IS_ERR(mt->thermal_base))
>>   		return PTR_ERR(mt->thermal_base);
>> @@ -1182,16 +1174,16 @@ static int mtk_thermal_probe(struct platform_device *pdev)
>>   	if (ret)
>>   		return ret;
>>   
>> -	ret = clk_prepare_enable(mt->clk_auxadc);
>> -	if (ret) {
>> -		dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", ret);
>> -		return ret;
>> +	mt->clk_auxadc = devm_clk_get_enabled(&pdev->dev, "auxadc");
>> +	if (IS_ERR(mt->clk_auxadc)) {
>> +		dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", mt->clk_auxadc);
>> +		return PTR_ERR(mt->clk_auxadc);
>>   	}
>>   
>> -	ret = clk_prepare_enable(mt->clk_peri_therm);
>> -	if (ret) {
>> -		dev_err(&pdev->dev, "Can't enable peri clk: %d\n", ret);
>> -		goto err_disable_clk_auxadc;
>> +	mt->clk_peri_therm = devm_clk_get_enabled(&pdev->dev, "therm");
>> +	if (IS_ERR(mt->clk_peri_therm)) {
>> +		dev_err(&pdev->dev, "Can't enable peri clk: %d\n", mt->clk_peri_therm);
>> +		return PTR_ERR(mt->clk_peri_therm);
>>   	}
>>   
>>   	if (mt->conf->version != MTK_THERMAL_V1) {
>> @@ -1215,38 +1207,18 @@ static int mtk_thermal_probe(struct platform_device *pdev)
>>   
>>   	tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
>>   					      &mtk_thermal_ops);
>> -	if (IS_ERR(tzdev)) {
>> -		ret = PTR_ERR(tzdev);
>> -		goto err_disable_clk_peri_therm;
>> -	}
>> +	if (IS_ERR(tzdev))
>> +		return PTR_ERR(tzdev);
>>   
>>   	ret = devm_thermal_add_hwmon_sysfs(tzdev);
>>   	if (ret)
>>   		dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs");
>>   
>>   	return 0;
>> -
>> -err_disable_clk_peri_therm:
>> -	clk_disable_unprepare(mt->clk_peri_therm);
>> -err_disable_clk_auxadc:
>> -	clk_disable_unprepare(mt->clk_auxadc);
>> -
>> -	return ret;
>> -}
>> -
>> -static int mtk_thermal_remove(struct platform_device *pdev)
>> -{
>> -	struct mtk_thermal *mt = platform_get_drvdata(pdev);
>> -
>> -	clk_disable_unprepare(mt->clk_peri_therm);
>> -	clk_disable_unprepare(mt->clk_auxadc);
>> -
>> -	return 0;
>>   }
>>   
>>   static struct platform_driver mtk_thermal_driver = {
>>   	.probe = mtk_thermal_probe,
>> -	.remove = mtk_thermal_remove,
>>   	.driver = {
>>   		.name = "mtk-thermal",
>>   		.of_match_table = mtk_thermal_of_match,
>> -- 
>> 2.34.1
> 
> ping?
kernel test robot April 17, 2023, 10:43 a.m. UTC | #3
On Mon, Apr 17, 2023 at 06:15:02PM +0800, Kang Chen wrote:
> 
> 
> > 2023年4月17日 17:52,Daniel Lezcano <daniel.lezcano@linaro.org> 写道:
> > 
> > 
> > Hi,
> > 
> > this patch does not apply:
> > 
> > Analyzing 9 messages in the thread
> > Will use the latest revision: v3
> > You can pick other revisions using the -vN flag
> > Checking attestation on all messages, may take a moment...
> > ---
> >  [PATCH v3 2/2] thermal: mediatek: change clk_prepare_enable to devm_clk_get_enabled in mtk_thermal_probe
> >    + Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> >    + Link: https://lore.kernel.org/r/20230411063531.3976354-2-void0red@hust.edu.cn
> > ---
> > Total patches: 1 (cherrypicked: 2)
> > ---
> > Link: https://lore.kernel.org/r/20230411063531.3976354-1-void0red@hust.edu.cn
> > Base: not specified
> > Applying: thermal: mediatek: change clk_prepare_enable to devm_clk_get_enabled in mtk_thermal_probe
> > error: patch failed: drivers/thermal/mediatek/auxadc_thermal.c:1182
> > error: drivers/thermal/mediatek/auxadc_thermal.c: patch does not apply
> > Patch failed at 0001 thermal: mediatek: change clk_prepare_enable to devm_clk_get_enabled in mtk_thermal_probe
> Could you show me your work tree? I can apply it on mainline-6.3-rc7...

Please write it against linux-next instead.

regards,
dan carpenter
AngeloGioacchino Del Regno April 18, 2023, 9:25 a.m. UTC | #4
Il 17/04/23 14:55, Kang Chen ha scritto:
> Smatch reports:
> 1. mtk_thermal_probe() warn: 'apmixed_base' from of_iomap() not released.
> 2. mtk_thermal_probe() warn: 'auxadc_base' from of_iomap() not released.
> 
> The original code forgets to release iomap resource when handling errors,
> fix it by switch to devm_of_iomap.
> 
> Fixes: 89945047b166 ("thermal: mediatek: Add tsensor support for V2 thermal system")
> Signed-off-by: Kang Chen <void0red@hust.edu.cn>
> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>

Good job!

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
diff mbox series

Patch

diff --git a/drivers/thermal/mediatek/auxadc_thermal.c b/drivers/thermal/mediatek/auxadc_thermal.c
index 3372f7c29626..995837ce3ea2 100644
--- a/drivers/thermal/mediatek/auxadc_thermal.c
+++ b/drivers/thermal/mediatek/auxadc_thermal.c
@@ -1116,14 +1116,6 @@  static int mtk_thermal_probe(struct platform_device *pdev)
 
 	mt->conf = of_device_get_match_data(&pdev->dev);
 
-	mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm");
-	if (IS_ERR(mt->clk_peri_therm))
-		return PTR_ERR(mt->clk_peri_therm);
-
-	mt->clk_auxadc = devm_clk_get(&pdev->dev, "auxadc");
-	if (IS_ERR(mt->clk_auxadc))
-		return PTR_ERR(mt->clk_auxadc);
-
 	mt->thermal_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
 	if (IS_ERR(mt->thermal_base))
 		return PTR_ERR(mt->thermal_base);
@@ -1182,16 +1174,16 @@  static int mtk_thermal_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	ret = clk_prepare_enable(mt->clk_auxadc);
-	if (ret) {
-		dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", ret);
-		return ret;
+	mt->clk_auxadc = devm_clk_get_enabled(&pdev->dev, "auxadc");
+	if (IS_ERR(mt->clk_auxadc)) {
+		dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", mt->clk_auxadc);
+		return PTR_ERR(mt->clk_auxadc);
 	}
 
-	ret = clk_prepare_enable(mt->clk_peri_therm);
-	if (ret) {
-		dev_err(&pdev->dev, "Can't enable peri clk: %d\n", ret);
-		goto err_disable_clk_auxadc;
+	mt->clk_peri_therm = devm_clk_get_enabled(&pdev->dev, "therm");
+	if (IS_ERR(mt->clk_peri_therm)) {
+		dev_err(&pdev->dev, "Can't enable peri clk: %d\n", mt->clk_peri_therm);
+		return PTR_ERR(mt->clk_peri_therm);
 	}
 
 	if (mt->conf->version != MTK_THERMAL_V1) {
@@ -1215,38 +1207,18 @@  static int mtk_thermal_probe(struct platform_device *pdev)
 
 	tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
 					      &mtk_thermal_ops);
-	if (IS_ERR(tzdev)) {
-		ret = PTR_ERR(tzdev);
-		goto err_disable_clk_peri_therm;
-	}
+	if (IS_ERR(tzdev))
+		return PTR_ERR(tzdev);
 
 	ret = devm_thermal_add_hwmon_sysfs(tzdev);
 	if (ret)
 		dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs");
 
 	return 0;
-
-err_disable_clk_peri_therm:
-	clk_disable_unprepare(mt->clk_peri_therm);
-err_disable_clk_auxadc:
-	clk_disable_unprepare(mt->clk_auxadc);
-
-	return ret;
-}
-
-static int mtk_thermal_remove(struct platform_device *pdev)
-{
-	struct mtk_thermal *mt = platform_get_drvdata(pdev);
-
-	clk_disable_unprepare(mt->clk_peri_therm);
-	clk_disable_unprepare(mt->clk_auxadc);
-
-	return 0;
 }
 
 static struct platform_driver mtk_thermal_driver = {
 	.probe = mtk_thermal_probe,
-	.remove = mtk_thermal_remove,
 	.driver = {
 		.name = "mtk-thermal",
 		.of_match_table = mtk_thermal_of_match,