| Message ID | 20230414055341.335456-2-andreas@kemnade.info |
|---|---|
| State | Superseded |
| Headers | show |
| Series | leds: Add a driver for the BD2606MVV | expand |
On Fri, 14 Apr 2023 17:54:12 +0200 Andreas Kemnade <andreas@kemnade.info> wrote: > On Fri, 14 Apr 2023 17:28:49 +0200 > Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > > > On 14/04/2023 07:53, Andreas Kemnade wrote: > > > Document ROHM BD2606MVV LED driver devicetree bindings. > > > > Subject: no improvements and no comments from your side. Why? > > > old subject (v2): > > dt-bindings: leds: ROHM BD2606MVV LED driver > > Your comment: > Subject: maybe drop "driver" (suggests it is for Linux drivers, although > maybe it matches the actual hardware here?) and add missing verb, e.g. > "Add ROHM ..." > > New Subject (v3/4): > dt-bindings: leds: Add ROHM BD2606MVV LED driver > > What is still missing? > ok, answering myself: missing verb was added ("Add") but s/driver// is missing Sorry. Regards, Andreas
On 14/04/2023 17:54, Andreas Kemnade wrote: > On Fri, 14 Apr 2023 17:28:49 +0200 > Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > >> On 14/04/2023 07:53, Andreas Kemnade wrote: >>> Document ROHM BD2606MVV LED driver devicetree bindings. >> >> Subject: no improvements and no comments from your side. Why? >> > old subject (v2): > > dt-bindings: leds: ROHM BD2606MVV LED driver > > Your comment: > Subject: maybe drop "driver" (suggests it is for Linux drivers, although > maybe it matches the actual hardware here?) and add missing verb, e.g. > "Add ROHM ..." > > New Subject (v3/4): > dt-bindings: leds: Add ROHM BD2606MVV LED driver > > What is still missing? There is still "driver". Comment was: drop "driver". Where is it dropped? If you do not agree, sure, just respond with something. Best regards, Krzysztof
Hi, On Fri, 14 Apr 2023 23:17:56 +0200 Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > On 14/04/2023 17:54, Andreas Kemnade wrote: > > On Fri, 14 Apr 2023 17:28:49 +0200 > > Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > > > >> On 14/04/2023 07:53, Andreas Kemnade wrote: > >>> Document ROHM BD2606MVV LED driver devicetree bindings. > >> > >> Subject: no improvements and no comments from your side. Why? > >> > > old subject (v2): > > > > dt-bindings: leds: ROHM BD2606MVV LED driver > > > > Your comment: > > Subject: maybe drop "driver" (suggests it is for Linux drivers, although > > maybe it matches the actual hardware here?) and add missing verb, e.g. > > "Add ROHM ..." > > > > New Subject (v3/4): > > dt-bindings: leds: Add ROHM BD2606MVV LED driver > > > > What is still missing? > > There is still "driver". Comment was: drop "driver". Where is it dropped? > > If you do not agree, sure, just respond with something. > I am fine with both. On one hand BD2606MVV is not a LED by itself but LEDs can be connected to it. so the chip itself can be called LED driver. But on the other hand I think that holds true for everything in drivers/leds and binding/leds and we do not call the subsystem leddriver. So there are reasons for and against "driver" in the subject line. Regards, Andreas
diff --git a/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml b/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml new file mode 100644 index 0000000000000..14700a2e5feaa --- /dev/null +++ b/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/rohm,bd2606mvv.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD2606MVV LED controller + +maintainers: + - Andreas Kemnade <andreas@kemnade.info> + +description: + The BD2606 MVV is a programmable LED controller connected via I2C that can + drive 6 separate lines. Each of them can be individually switched on and off, + but the brightness setting is shared between pairs of them. + + Datasheet is available at + https://fscdn.rohm.com/en/products/databook/datasheet/ic/power/led_driver/bd2606mvv_1-e.pdf + +properties: + compatible: + const: rohm,bd2606mvv + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + enable-gpios: + maxItems: 1 + description: GPIO pin to enable/disable the device. + +patternProperties: + "^led@[0-6]$": + type: object + $ref: common.yaml# + unevaluatedProperties: false + + properties: + reg: + minimum: 0 + maximum: 6 + + required: + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@66 { + compatible = "rohm,bd2606mvv"; + reg = <0x66>; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0x0>; + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_POWER; + }; + + led@2 { + reg = <0x2>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_STATUS; + }; + }; + }; + +...