diff mbox series

[v2,11/13] hw/virtio: derive vhost-user-gpio from vhost-user-device

Message ID 20230418162140.373219-12-alex.bennee@linaro.org
State Superseded
Headers show
Series virtio: add vhost-user-generic and reduce copy and paste | expand

Commit Message

Alex Bennée April 18, 2023, 4:21 p.m. UTC
Now the new base class supports config handling we can take advantage
and make vhost-user-gpio a much simpler boilerplate wrapper. Also as
this doesn't require any target specific hacks we only need to build
the stubs once.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

---
v2
  - use new vhost-user-base
  - move build to common code
---
 include/hw/virtio/vhost-user-gpio.h |  23 +-
 hw/virtio/vhost-user-gpio.c         | 400 ++--------------------------
 hw/virtio/meson.build               |   5 +-
 3 files changed, 22 insertions(+), 406 deletions(-)

Comments

Mark Cave-Ayland April 20, 2023, 10:12 a.m. UTC | #1
On 18/04/2023 17:21, Alex Bennée wrote:

> Now the new base class supports config handling we can take advantage
> and make vhost-user-gpio a much simpler boilerplate wrapper. Also as
> this doesn't require any target specific hacks we only need to build
> the stubs once.
> 
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> 
> ---
> v2
>    - use new vhost-user-base
>    - move build to common code
> ---
>   include/hw/virtio/vhost-user-gpio.h |  23 +-
>   hw/virtio/vhost-user-gpio.c         | 400 ++--------------------------
>   hw/virtio/meson.build               |   5 +-
>   3 files changed, 22 insertions(+), 406 deletions(-)
> 
> diff --git a/include/hw/virtio/vhost-user-gpio.h b/include/hw/virtio/vhost-user-gpio.h
> index a9d3f9b049..0948654dec 100644
> --- a/include/hw/virtio/vhost-user-gpio.h
> +++ b/include/hw/virtio/vhost-user-gpio.h
> @@ -12,33 +12,14 @@
>   #include "hw/virtio/virtio.h"
>   #include "hw/virtio/vhost.h"
>   #include "hw/virtio/vhost-user.h"
> -#include "standard-headers/linux/virtio_gpio.h"
> -#include "chardev/char-fe.h"
> +#include "hw/virtio/vhost-user-device.h"
>   
>   #define TYPE_VHOST_USER_GPIO "vhost-user-gpio-device"
>   OBJECT_DECLARE_SIMPLE_TYPE(VHostUserGPIO, VHOST_USER_GPIO);
>   
>   struct VHostUserGPIO {
>       /*< private >*/
> -    VirtIODevice parent_obj;
> -    CharBackend chardev;
> -    struct virtio_gpio_config config;
> -    struct vhost_virtqueue *vhost_vqs;
> -    struct vhost_dev vhost_dev;
> -    VhostUserState vhost_user;
> -    VirtQueue *command_vq;
> -    VirtQueue *interrupt_vq;
> -    /**
> -     * There are at least two steps of initialization of the
> -     * vhost-user device. The first is a "connect" step and
> -     * second is a "start" step. Make a separation between
> -     * those initialization phases by using two fields.
> -     *
> -     * @connected: see vu_gpio_connect()/vu_gpio_disconnect()
> -     * @started_vu: see vu_gpio_start()/vu_gpio_stop()
> -     */
> -    bool connected;
> -    bool started_vu;
> +    VHostUserBase parent;
>       /*< public >*/
>   };

As before:

struct VHostUserGPIO {
     VHostUserBase parent_obj;
};

> diff --git a/hw/virtio/vhost-user-gpio.c b/hw/virtio/vhost-user-gpio.c
> index 3b013f2d0f..9f37c25415 100644
> --- a/hw/virtio/vhost-user-gpio.c
> +++ b/hw/virtio/vhost-user-gpio.c
> @@ -11,382 +11,25 @@
>   #include "hw/qdev-properties.h"
>   #include "hw/virtio/virtio-bus.h"
>   #include "hw/virtio/vhost-user-gpio.h"
> -#include "qemu/error-report.h"
>   #include "standard-headers/linux/virtio_ids.h"
> -#include "trace.h"
> +#include "standard-headers/linux/virtio_gpio.h"
>   
> -#define REALIZE_CONNECTION_RETRIES 3
> -#define VHOST_NVQS 2
> -
> -/* Features required from VirtIO */
> -static const int feature_bits[] = {
> -    VIRTIO_F_VERSION_1,
> -    VIRTIO_F_NOTIFY_ON_EMPTY,
> -    VIRTIO_RING_F_INDIRECT_DESC,
> -    VIRTIO_RING_F_EVENT_IDX,
> -    VIRTIO_GPIO_F_IRQ,
> -    VIRTIO_F_RING_RESET,
> -    VHOST_INVALID_FEATURE_BIT
> -};
> -
> -static void vu_gpio_get_config(VirtIODevice *vdev, uint8_t *config)
> -{
> -    VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
> -
> -    memcpy(config, &gpio->config, sizeof(gpio->config));
> -}
> -
> -static int vu_gpio_config_notifier(struct vhost_dev *dev)
> -{
> -    VHostUserGPIO *gpio = VHOST_USER_GPIO(dev->vdev);
> -
> -    memcpy(dev->vdev->config, &gpio->config, sizeof(gpio->config));
> -    virtio_notify_config(dev->vdev);
> -
> -    return 0;
> -}
> -
> -const VhostDevConfigOps gpio_ops = {
> -    .vhost_dev_config_notifier = vu_gpio_config_notifier,
> +static Property vgpio_properties[] = {
> +    DEFINE_PROP_CHR("chardev", VHostUserBase, chardev),
> +    DEFINE_PROP_END_OF_LIST(),
>   };
>   
> -static int vu_gpio_start(VirtIODevice *vdev)
> +static void vgpio_realize(DeviceState *dev, Error **errp)
>   {
> -    BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
> -    VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
> -    VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
> -    struct vhost_dev *vhost_dev = &gpio->vhost_dev;
> -    int ret, i;
> +    VHostUserBase *vub = VHOST_USER_BASE(dev);
> +    VHostUserBaseClass *vubc = VHOST_USER_BASE_GET_CLASS(dev);
>   
> -    if (!k->set_guest_notifiers) {
> -        error_report("binding does not support guest notifiers");
> -        return -ENOSYS;
> -    }
> +    /* Fixed for GPIO */
> +    vub->virtio_id = VIRTIO_ID_GPIO;
> +    vub->num_vqs = 2;
> +    vub->config_size = sizeof(struct virtio_gpio_config);
>   
> -    ret = vhost_dev_enable_notifiers(vhost_dev, vdev);
> -    if (ret < 0) {
> -        error_report("Error enabling host notifiers: %d", ret);
> -        return ret;
> -    }
> -
> -    ret = k->set_guest_notifiers(qbus->parent, vhost_dev->nvqs, true);
> -    if (ret < 0) {
> -        error_report("Error binding guest notifier: %d", ret);
> -        goto err_host_notifiers;
> -    }
> -
> -    /*
> -     * Before we start up we need to ensure we have the final feature
> -     * set needed for the vhost configuration. The backend may also
> -     * apply backend_features when the feature set is sent.
> -     */
> -    vhost_ack_features(&gpio->vhost_dev, feature_bits, vdev->guest_features);
> -
> -    ret = vhost_dev_start(&gpio->vhost_dev, vdev, false);
> -    if (ret < 0) {
> -        error_report("Error starting vhost-user-gpio: %d", ret);
> -        goto err_guest_notifiers;
> -    }
> -    gpio->started_vu = true;
> -
> -    /*
> -     * guest_notifier_mask/pending not used yet, so just unmask
> -     * everything here. virtio-pci will do the right thing by
> -     * enabling/disabling irqfd.
> -     */
> -    for (i = 0; i < gpio->vhost_dev.nvqs; i++) {
> -        vhost_virtqueue_mask(&gpio->vhost_dev, vdev, i, false);
> -    }
> -
> -    /*
> -     * As we must have VHOST_USER_F_PROTOCOL_FEATURES (because
> -     * VHOST_USER_GET_CONFIG requires it) we need to explicitly enable
> -     * the vrings.
> -     */
> -    g_assert(vhost_dev->vhost_ops &&
> -             vhost_dev->vhost_ops->vhost_set_vring_enable);
> -    ret = vhost_dev->vhost_ops->vhost_set_vring_enable(vhost_dev, true);
> -    if (ret == 0) {
> -        return 0;
> -    }
> -
> -    error_report("Failed to start vrings for vhost-user-gpio: %d", ret);
> -
> -err_guest_notifiers:
> -    k->set_guest_notifiers(qbus->parent, gpio->vhost_dev.nvqs, false);
> -err_host_notifiers:
> -    vhost_dev_disable_notifiers(&gpio->vhost_dev, vdev);
> -
> -    return ret;
> -}
> -
> -static void vu_gpio_stop(VirtIODevice *vdev)
> -{
> -    VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
> -    BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
> -    VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
> -    struct vhost_dev *vhost_dev = &gpio->vhost_dev;
> -    int ret;
> -
> -    if (!gpio->started_vu) {
> -        return;
> -    }
> -    gpio->started_vu = false;
> -
> -    if (!k->set_guest_notifiers) {
> -        return;
> -    }
> -
> -    vhost_dev_stop(vhost_dev, vdev, false);
> -
> -    ret = k->set_guest_notifiers(qbus->parent, vhost_dev->nvqs, false);
> -    if (ret < 0) {
> -        error_report("vhost guest notifier cleanup failed: %d", ret);
> -        return;
> -    }
> -
> -    vhost_dev_disable_notifiers(vhost_dev, vdev);
> -}
> -
> -static void vu_gpio_set_status(VirtIODevice *vdev, uint8_t status)
> -{
> -    VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
> -    bool should_start = virtio_device_should_start(vdev, status);
> -
> -    trace_virtio_gpio_set_status(status);
> -
> -    if (!gpio->connected) {
> -        return;
> -    }
> -
> -    if (vhost_dev_is_started(&gpio->vhost_dev) == should_start) {
> -        return;
> -    }
> -
> -    if (should_start) {
> -        if (vu_gpio_start(vdev)) {
> -            qemu_chr_fe_disconnect(&gpio->chardev);
> -        }
> -    } else {
> -        vu_gpio_stop(vdev);
> -    }
> -}
> -
> -static uint64_t vu_gpio_get_features(VirtIODevice *vdev, uint64_t features,
> -                                     Error **errp)
> -{
> -    VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
> -
> -    return vhost_get_features(&gpio->vhost_dev, feature_bits, features);
> -}
> -
> -static void vu_gpio_handle_output(VirtIODevice *vdev, VirtQueue *vq)
> -{
> -    /*
> -     * Not normally called; it's the daemon that handles the queue;
> -     * however virtio's cleanup path can call this.
> -     */
> -}
> -
> -static void vu_gpio_guest_notifier_mask(VirtIODevice *vdev, int idx, bool mask)
> -{
> -    VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
> -
> -    /*
> -     * Add the check for configure interrupt, Use VIRTIO_CONFIG_IRQ_IDX -1
> -     * as the macro of configure interrupt's IDX, If this driver does not
> -     * support, the function will return
> -     */
> -
> -    if (idx == VIRTIO_CONFIG_IRQ_IDX) {
> -        return;
> -    }
> -
> -    vhost_virtqueue_mask(&gpio->vhost_dev, vdev, idx, mask);
> -}
> -
> -static void do_vhost_user_cleanup(VirtIODevice *vdev, VHostUserGPIO *gpio)
> -{
> -    virtio_delete_queue(gpio->command_vq);
> -    virtio_delete_queue(gpio->interrupt_vq);
> -    g_free(gpio->vhost_vqs);
> -    virtio_cleanup(vdev);
> -    vhost_user_cleanup(&gpio->vhost_user);
> -}
> -
> -static int vu_gpio_connect(DeviceState *dev, Error **errp)
> -{
> -    VirtIODevice *vdev = VIRTIO_DEVICE(dev);
> -    VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
> -    struct vhost_dev *vhost_dev = &gpio->vhost_dev;
> -    int ret;
> -
> -    if (gpio->connected) {
> -        return 0;
> -    }
> -    gpio->connected = true;
> -
> -    vhost_dev_set_config_notifier(vhost_dev, &gpio_ops);
> -    gpio->vhost_user.supports_config = true;
> -
> -    gpio->vhost_dev.nvqs = VHOST_NVQS;
> -    gpio->vhost_dev.vqs = gpio->vhost_vqs;
> -
> -    ret = vhost_dev_init(vhost_dev, &gpio->vhost_user,
> -                         VHOST_BACKEND_TYPE_USER, 0, errp);
> -    if (ret < 0) {
> -        return ret;
> -    }
> -
> -    /* restore vhost state */
> -    if (virtio_device_started(vdev, vdev->status)) {
> -        vu_gpio_start(vdev);
> -    }
> -
> -    return 0;
> -}
> -
> -static void vu_gpio_event(void *opaque, QEMUChrEvent event);
> -
> -static void vu_gpio_disconnect(DeviceState *dev)
> -{
> -    VirtIODevice *vdev = VIRTIO_DEVICE(dev);
> -    VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
> -
> -    if (!gpio->connected) {
> -        return;
> -    }
> -    gpio->connected = false;
> -
> -    vu_gpio_stop(vdev);
> -    vhost_dev_cleanup(&gpio->vhost_dev);
> -
> -    /* Re-instate the event handler for new connections */
> -    qemu_chr_fe_set_handlers(&gpio->chardev,
> -                             NULL, NULL, vu_gpio_event,
> -                             NULL, dev, NULL, true);
> -}
> -
> -static void vu_gpio_event(void *opaque, QEMUChrEvent event)
> -{
> -    DeviceState *dev = opaque;
> -    VirtIODevice *vdev = VIRTIO_DEVICE(dev);
> -    VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
> -    Error *local_err = NULL;
> -
> -    switch (event) {
> -    case CHR_EVENT_OPENED:
> -        if (vu_gpio_connect(dev, &local_err) < 0) {
> -            qemu_chr_fe_disconnect(&gpio->chardev);
> -            return;
> -        }
> -        break;
> -    case CHR_EVENT_CLOSED:
> -        /* defer close until later to avoid circular close */
> -        vhost_user_async_close(dev, &gpio->chardev, &gpio->vhost_dev,
> -                               vu_gpio_disconnect);
> -        break;
> -    case CHR_EVENT_BREAK:
> -    case CHR_EVENT_MUX_IN:
> -    case CHR_EVENT_MUX_OUT:
> -        /* Ignore */
> -        break;
> -    }
> -}
> -
> -static int vu_gpio_realize_connect(VHostUserGPIO *gpio, Error **errp)
> -{
> -    VirtIODevice *vdev = &gpio->parent_obj;
> -    DeviceState *dev = &vdev->parent_obj;
> -    struct vhost_dev *vhost_dev = &gpio->vhost_dev;
> -    int ret;
> -
> -    ret = qemu_chr_fe_wait_connected(&gpio->chardev, errp);
> -    if (ret < 0) {
> -        return ret;
> -    }
> -
> -    /*
> -     * vu_gpio_connect() may have already connected (via the event
> -     * callback) in which case it will just report success.
> -     */
> -    ret = vu_gpio_connect(dev, errp);
> -    if (ret < 0) {
> -        qemu_chr_fe_disconnect(&gpio->chardev);
> -        return ret;
> -    }
> -    g_assert(gpio->connected);
> -
> -    ret = vhost_dev_get_config(vhost_dev, (uint8_t *)&gpio->config,
> -                               sizeof(gpio->config), errp);
> -
> -    if (ret < 0) {
> -        error_report("vhost-user-gpio: get config failed");
> -
> -        qemu_chr_fe_disconnect(&gpio->chardev);
> -        vhost_dev_cleanup(vhost_dev);
> -        return ret;
> -    }
> -
> -    return 0;
> -}
> -
> -static void vu_gpio_device_realize(DeviceState *dev, Error **errp)
> -{
> -    ERRP_GUARD();
> -
> -    VirtIODevice *vdev = VIRTIO_DEVICE(dev);
> -    VHostUserGPIO *gpio = VHOST_USER_GPIO(dev);
> -    int retries, ret;
> -
> -    if (!gpio->chardev.chr) {
> -        error_setg(errp, "vhost-user-gpio: chardev is mandatory");
> -        return;
> -    }
> -
> -    if (!vhost_user_init(&gpio->vhost_user, &gpio->chardev, errp)) {
> -        return;
> -    }
> -
> -    virtio_init(vdev, VIRTIO_ID_GPIO, sizeof(gpio->config));
> -
> -    gpio->command_vq = virtio_add_queue(vdev, 256, vu_gpio_handle_output);
> -    gpio->interrupt_vq = virtio_add_queue(vdev, 256, vu_gpio_handle_output);
> -    gpio->vhost_vqs = g_new0(struct vhost_virtqueue, VHOST_NVQS);
> -
> -    gpio->connected = false;
> -
> -    qemu_chr_fe_set_handlers(&gpio->chardev, NULL, NULL, vu_gpio_event, NULL,
> -                             dev, NULL, true);
> -
> -    retries = REALIZE_CONNECTION_RETRIES;
> -    g_assert(!*errp);
> -    do {
> -        if (*errp) {
> -            error_prepend(errp, "Reconnecting after error: ");
> -            error_report_err(*errp);
> -            *errp = NULL;
> -        }
> -        ret = vu_gpio_realize_connect(gpio, errp);
> -    } while (ret < 0 && retries--);
> -
> -    if (ret < 0) {
> -        do_vhost_user_cleanup(vdev, gpio);
> -    }
> -
> -    return;
> -}
> -
> -static void vu_gpio_device_unrealize(DeviceState *dev)
> -{
> -    VirtIODevice *vdev = VIRTIO_DEVICE(dev);
> -    VHostUserGPIO *gpio = VHOST_USER_GPIO(dev);
> -
> -    vu_gpio_set_status(vdev, 0);
> -    qemu_chr_fe_set_handlers(&gpio->chardev, NULL, NULL, NULL, NULL, NULL, NULL,
> -                             false);
> -    vhost_dev_cleanup(&gpio->vhost_dev);
> -    do_vhost_user_cleanup(vdev, gpio);
> +    vubc->parent_realize(dev, errp);
>   }
>   
>   static const VMStateDescription vu_gpio_vmstate = {
> @@ -394,30 +37,21 @@ static const VMStateDescription vu_gpio_vmstate = {
>       .unmigratable = 1,
>   };
>   
> -static Property vu_gpio_properties[] = {
> -    DEFINE_PROP_CHR("chardev", VHostUserGPIO, chardev),
> -    DEFINE_PROP_END_OF_LIST(),
> -};
> -
>   static void vu_gpio_class_init(ObjectClass *klass, void *data)
>   {
>       DeviceClass *dc = DEVICE_CLASS(klass);
> -    VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass);
> +    VHostUserBaseClass *vubc = VHOST_USER_BASE_CLASS(klass);
>   
> -    device_class_set_props(dc, vu_gpio_properties);
>       dc->vmsd = &vu_gpio_vmstate;
> +    device_class_set_props(dc, vgpio_properties);
> +    device_class_set_parent_realize(dc, vgpio_realize,
> +                                    &vubc->parent_realize);
>       set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
> -    vdc->realize = vu_gpio_device_realize;
> -    vdc->unrealize = vu_gpio_device_unrealize;
> -    vdc->get_features = vu_gpio_get_features;
> -    vdc->get_config = vu_gpio_get_config;
> -    vdc->set_status = vu_gpio_set_status;
> -    vdc->guest_notifier_mask = vu_gpio_guest_notifier_mask;
>   }
>   
>   static const TypeInfo vu_gpio_info = {
>       .name = TYPE_VHOST_USER_GPIO,
> -    .parent = TYPE_VIRTIO_DEVICE,
> +    .parent = TYPE_VHOST_USER_BASE,
>       .instance_size = sizeof(VHostUserGPIO),
>       .class_init = vu_gpio_class_init,
>   };
> diff --git a/hw/virtio/meson.build b/hw/virtio/meson.build
> index de442dcb96..8c6cb2143d 100644
> --- a/hw/virtio/meson.build
> +++ b/hw/virtio/meson.build
> @@ -7,6 +7,9 @@ softmmu_virtio_ss.add(when: 'CONFIG_VIRTIO_MMIO', if_true: files('virtio-mmio.c'
>   softmmu_virtio_ss.add(when: 'CONFIG_VHOST_USER_RNG', if_true: files('vhost-user-rng.c'))
>   softmmu_virtio_ss.add(when: ['CONFIG_VIRTIO_PCI', 'CONFIG_VHOST_USER_RNG'],
>                         if_true: files('vhost-user-rng-pci.c'))
> +softmmu_virtio_ss.add(when: 'CONFIG_VHOST_USER_GPIO', if_true: files('vhost-user-gpio.c'))
> +softmmu_virtio_ss.add(when: ['CONFIG_VIRTIO_PCI', 'CONFIG_VHOST_USER_GPIO'],
> +                      if_true: files('vhost-user-gpio-pci.c'))
>   
>   specific_virtio_ss = ss.source_set()
>   specific_virtio_ss.add(files('virtio.c'))
> @@ -37,8 +40,6 @@ specific_virtio_ss.add(when: 'CONFIG_VIRTIO_RNG', if_true: files('virtio-rng.c')
>   specific_virtio_ss.add(when: 'CONFIG_VIRTIO_IOMMU', if_true: files('virtio-iommu.c'))
>   specific_virtio_ss.add(when: 'CONFIG_VIRTIO_MEM', if_true: files('virtio-mem.c'))
>   specific_virtio_ss.add(when: 'CONFIG_VHOST_USER_I2C', if_true: files('vhost-user-i2c.c'))
> -specific_virtio_ss.add(when: 'CONFIG_VHOST_USER_GPIO', if_true: files('vhost-user-gpio.c'))
> -specific_virtio_ss.add(when: ['CONFIG_VIRTIO_PCI', 'CONFIG_VHOST_USER_GPIO'], if_true: files('vhost-user-gpio-pci.c'))
>   specific_virtio_ss.add(when: 'CONFIG_VHOST_VDPA_DEV', if_true: files('vdpa-dev.c'))
>   
>   virtio_pci_ss = ss.source_set()

Otherwise LGTM:

Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>


ATB,

Mark.
diff mbox series

Patch

diff --git a/include/hw/virtio/vhost-user-gpio.h b/include/hw/virtio/vhost-user-gpio.h
index a9d3f9b049..0948654dec 100644
--- a/include/hw/virtio/vhost-user-gpio.h
+++ b/include/hw/virtio/vhost-user-gpio.h
@@ -12,33 +12,14 @@ 
 #include "hw/virtio/virtio.h"
 #include "hw/virtio/vhost.h"
 #include "hw/virtio/vhost-user.h"
-#include "standard-headers/linux/virtio_gpio.h"
-#include "chardev/char-fe.h"
+#include "hw/virtio/vhost-user-device.h"
 
 #define TYPE_VHOST_USER_GPIO "vhost-user-gpio-device"
 OBJECT_DECLARE_SIMPLE_TYPE(VHostUserGPIO, VHOST_USER_GPIO);
 
 struct VHostUserGPIO {
     /*< private >*/
-    VirtIODevice parent_obj;
-    CharBackend chardev;
-    struct virtio_gpio_config config;
-    struct vhost_virtqueue *vhost_vqs;
-    struct vhost_dev vhost_dev;
-    VhostUserState vhost_user;
-    VirtQueue *command_vq;
-    VirtQueue *interrupt_vq;
-    /**
-     * There are at least two steps of initialization of the
-     * vhost-user device. The first is a "connect" step and
-     * second is a "start" step. Make a separation between
-     * those initialization phases by using two fields.
-     *
-     * @connected: see vu_gpio_connect()/vu_gpio_disconnect()
-     * @started_vu: see vu_gpio_start()/vu_gpio_stop()
-     */
-    bool connected;
-    bool started_vu;
+    VHostUserBase parent;
     /*< public >*/
 };
 
diff --git a/hw/virtio/vhost-user-gpio.c b/hw/virtio/vhost-user-gpio.c
index 3b013f2d0f..9f37c25415 100644
--- a/hw/virtio/vhost-user-gpio.c
+++ b/hw/virtio/vhost-user-gpio.c
@@ -11,382 +11,25 @@ 
 #include "hw/qdev-properties.h"
 #include "hw/virtio/virtio-bus.h"
 #include "hw/virtio/vhost-user-gpio.h"
-#include "qemu/error-report.h"
 #include "standard-headers/linux/virtio_ids.h"
-#include "trace.h"
+#include "standard-headers/linux/virtio_gpio.h"
 
-#define REALIZE_CONNECTION_RETRIES 3
-#define VHOST_NVQS 2
-
-/* Features required from VirtIO */
-static const int feature_bits[] = {
-    VIRTIO_F_VERSION_1,
-    VIRTIO_F_NOTIFY_ON_EMPTY,
-    VIRTIO_RING_F_INDIRECT_DESC,
-    VIRTIO_RING_F_EVENT_IDX,
-    VIRTIO_GPIO_F_IRQ,
-    VIRTIO_F_RING_RESET,
-    VHOST_INVALID_FEATURE_BIT
-};
-
-static void vu_gpio_get_config(VirtIODevice *vdev, uint8_t *config)
-{
-    VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
-
-    memcpy(config, &gpio->config, sizeof(gpio->config));
-}
-
-static int vu_gpio_config_notifier(struct vhost_dev *dev)
-{
-    VHostUserGPIO *gpio = VHOST_USER_GPIO(dev->vdev);
-
-    memcpy(dev->vdev->config, &gpio->config, sizeof(gpio->config));
-    virtio_notify_config(dev->vdev);
-
-    return 0;
-}
-
-const VhostDevConfigOps gpio_ops = {
-    .vhost_dev_config_notifier = vu_gpio_config_notifier,
+static Property vgpio_properties[] = {
+    DEFINE_PROP_CHR("chardev", VHostUserBase, chardev),
+    DEFINE_PROP_END_OF_LIST(),
 };
 
-static int vu_gpio_start(VirtIODevice *vdev)
+static void vgpio_realize(DeviceState *dev, Error **errp)
 {
-    BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
-    VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
-    VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
-    struct vhost_dev *vhost_dev = &gpio->vhost_dev;
-    int ret, i;
+    VHostUserBase *vub = VHOST_USER_BASE(dev);
+    VHostUserBaseClass *vubc = VHOST_USER_BASE_GET_CLASS(dev);
 
-    if (!k->set_guest_notifiers) {
-        error_report("binding does not support guest notifiers");
-        return -ENOSYS;
-    }
+    /* Fixed for GPIO */
+    vub->virtio_id = VIRTIO_ID_GPIO;
+    vub->num_vqs = 2;
+    vub->config_size = sizeof(struct virtio_gpio_config);
 
-    ret = vhost_dev_enable_notifiers(vhost_dev, vdev);
-    if (ret < 0) {
-        error_report("Error enabling host notifiers: %d", ret);
-        return ret;
-    }
-
-    ret = k->set_guest_notifiers(qbus->parent, vhost_dev->nvqs, true);
-    if (ret < 0) {
-        error_report("Error binding guest notifier: %d", ret);
-        goto err_host_notifiers;
-    }
-
-    /*
-     * Before we start up we need to ensure we have the final feature
-     * set needed for the vhost configuration. The backend may also
-     * apply backend_features when the feature set is sent.
-     */
-    vhost_ack_features(&gpio->vhost_dev, feature_bits, vdev->guest_features);
-
-    ret = vhost_dev_start(&gpio->vhost_dev, vdev, false);
-    if (ret < 0) {
-        error_report("Error starting vhost-user-gpio: %d", ret);
-        goto err_guest_notifiers;
-    }
-    gpio->started_vu = true;
-
-    /*
-     * guest_notifier_mask/pending not used yet, so just unmask
-     * everything here. virtio-pci will do the right thing by
-     * enabling/disabling irqfd.
-     */
-    for (i = 0; i < gpio->vhost_dev.nvqs; i++) {
-        vhost_virtqueue_mask(&gpio->vhost_dev, vdev, i, false);
-    }
-
-    /*
-     * As we must have VHOST_USER_F_PROTOCOL_FEATURES (because
-     * VHOST_USER_GET_CONFIG requires it) we need to explicitly enable
-     * the vrings.
-     */
-    g_assert(vhost_dev->vhost_ops &&
-             vhost_dev->vhost_ops->vhost_set_vring_enable);
-    ret = vhost_dev->vhost_ops->vhost_set_vring_enable(vhost_dev, true);
-    if (ret == 0) {
-        return 0;
-    }
-
-    error_report("Failed to start vrings for vhost-user-gpio: %d", ret);
-
-err_guest_notifiers:
-    k->set_guest_notifiers(qbus->parent, gpio->vhost_dev.nvqs, false);
-err_host_notifiers:
-    vhost_dev_disable_notifiers(&gpio->vhost_dev, vdev);
-
-    return ret;
-}
-
-static void vu_gpio_stop(VirtIODevice *vdev)
-{
-    VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
-    BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
-    VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
-    struct vhost_dev *vhost_dev = &gpio->vhost_dev;
-    int ret;
-
-    if (!gpio->started_vu) {
-        return;
-    }
-    gpio->started_vu = false;
-
-    if (!k->set_guest_notifiers) {
-        return;
-    }
-
-    vhost_dev_stop(vhost_dev, vdev, false);
-
-    ret = k->set_guest_notifiers(qbus->parent, vhost_dev->nvqs, false);
-    if (ret < 0) {
-        error_report("vhost guest notifier cleanup failed: %d", ret);
-        return;
-    }
-
-    vhost_dev_disable_notifiers(vhost_dev, vdev);
-}
-
-static void vu_gpio_set_status(VirtIODevice *vdev, uint8_t status)
-{
-    VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
-    bool should_start = virtio_device_should_start(vdev, status);
-
-    trace_virtio_gpio_set_status(status);
-
-    if (!gpio->connected) {
-        return;
-    }
-
-    if (vhost_dev_is_started(&gpio->vhost_dev) == should_start) {
-        return;
-    }
-
-    if (should_start) {
-        if (vu_gpio_start(vdev)) {
-            qemu_chr_fe_disconnect(&gpio->chardev);
-        }
-    } else {
-        vu_gpio_stop(vdev);
-    }
-}
-
-static uint64_t vu_gpio_get_features(VirtIODevice *vdev, uint64_t features,
-                                     Error **errp)
-{
-    VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
-
-    return vhost_get_features(&gpio->vhost_dev, feature_bits, features);
-}
-
-static void vu_gpio_handle_output(VirtIODevice *vdev, VirtQueue *vq)
-{
-    /*
-     * Not normally called; it's the daemon that handles the queue;
-     * however virtio's cleanup path can call this.
-     */
-}
-
-static void vu_gpio_guest_notifier_mask(VirtIODevice *vdev, int idx, bool mask)
-{
-    VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
-
-    /*
-     * Add the check for configure interrupt, Use VIRTIO_CONFIG_IRQ_IDX -1
-     * as the macro of configure interrupt's IDX, If this driver does not
-     * support, the function will return
-     */
-
-    if (idx == VIRTIO_CONFIG_IRQ_IDX) {
-        return;
-    }
-
-    vhost_virtqueue_mask(&gpio->vhost_dev, vdev, idx, mask);
-}
-
-static void do_vhost_user_cleanup(VirtIODevice *vdev, VHostUserGPIO *gpio)
-{
-    virtio_delete_queue(gpio->command_vq);
-    virtio_delete_queue(gpio->interrupt_vq);
-    g_free(gpio->vhost_vqs);
-    virtio_cleanup(vdev);
-    vhost_user_cleanup(&gpio->vhost_user);
-}
-
-static int vu_gpio_connect(DeviceState *dev, Error **errp)
-{
-    VirtIODevice *vdev = VIRTIO_DEVICE(dev);
-    VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
-    struct vhost_dev *vhost_dev = &gpio->vhost_dev;
-    int ret;
-
-    if (gpio->connected) {
-        return 0;
-    }
-    gpio->connected = true;
-
-    vhost_dev_set_config_notifier(vhost_dev, &gpio_ops);
-    gpio->vhost_user.supports_config = true;
-
-    gpio->vhost_dev.nvqs = VHOST_NVQS;
-    gpio->vhost_dev.vqs = gpio->vhost_vqs;
-
-    ret = vhost_dev_init(vhost_dev, &gpio->vhost_user,
-                         VHOST_BACKEND_TYPE_USER, 0, errp);
-    if (ret < 0) {
-        return ret;
-    }
-
-    /* restore vhost state */
-    if (virtio_device_started(vdev, vdev->status)) {
-        vu_gpio_start(vdev);
-    }
-
-    return 0;
-}
-
-static void vu_gpio_event(void *opaque, QEMUChrEvent event);
-
-static void vu_gpio_disconnect(DeviceState *dev)
-{
-    VirtIODevice *vdev = VIRTIO_DEVICE(dev);
-    VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
-
-    if (!gpio->connected) {
-        return;
-    }
-    gpio->connected = false;
-
-    vu_gpio_stop(vdev);
-    vhost_dev_cleanup(&gpio->vhost_dev);
-
-    /* Re-instate the event handler for new connections */
-    qemu_chr_fe_set_handlers(&gpio->chardev,
-                             NULL, NULL, vu_gpio_event,
-                             NULL, dev, NULL, true);
-}
-
-static void vu_gpio_event(void *opaque, QEMUChrEvent event)
-{
-    DeviceState *dev = opaque;
-    VirtIODevice *vdev = VIRTIO_DEVICE(dev);
-    VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
-    Error *local_err = NULL;
-
-    switch (event) {
-    case CHR_EVENT_OPENED:
-        if (vu_gpio_connect(dev, &local_err) < 0) {
-            qemu_chr_fe_disconnect(&gpio->chardev);
-            return;
-        }
-        break;
-    case CHR_EVENT_CLOSED:
-        /* defer close until later to avoid circular close */
-        vhost_user_async_close(dev, &gpio->chardev, &gpio->vhost_dev,
-                               vu_gpio_disconnect);
-        break;
-    case CHR_EVENT_BREAK:
-    case CHR_EVENT_MUX_IN:
-    case CHR_EVENT_MUX_OUT:
-        /* Ignore */
-        break;
-    }
-}
-
-static int vu_gpio_realize_connect(VHostUserGPIO *gpio, Error **errp)
-{
-    VirtIODevice *vdev = &gpio->parent_obj;
-    DeviceState *dev = &vdev->parent_obj;
-    struct vhost_dev *vhost_dev = &gpio->vhost_dev;
-    int ret;
-
-    ret = qemu_chr_fe_wait_connected(&gpio->chardev, errp);
-    if (ret < 0) {
-        return ret;
-    }
-
-    /*
-     * vu_gpio_connect() may have already connected (via the event
-     * callback) in which case it will just report success.
-     */
-    ret = vu_gpio_connect(dev, errp);
-    if (ret < 0) {
-        qemu_chr_fe_disconnect(&gpio->chardev);
-        return ret;
-    }
-    g_assert(gpio->connected);
-
-    ret = vhost_dev_get_config(vhost_dev, (uint8_t *)&gpio->config,
-                               sizeof(gpio->config), errp);
-
-    if (ret < 0) {
-        error_report("vhost-user-gpio: get config failed");
-
-        qemu_chr_fe_disconnect(&gpio->chardev);
-        vhost_dev_cleanup(vhost_dev);
-        return ret;
-    }
-
-    return 0;
-}
-
-static void vu_gpio_device_realize(DeviceState *dev, Error **errp)
-{
-    ERRP_GUARD();
-
-    VirtIODevice *vdev = VIRTIO_DEVICE(dev);
-    VHostUserGPIO *gpio = VHOST_USER_GPIO(dev);
-    int retries, ret;
-
-    if (!gpio->chardev.chr) {
-        error_setg(errp, "vhost-user-gpio: chardev is mandatory");
-        return;
-    }
-
-    if (!vhost_user_init(&gpio->vhost_user, &gpio->chardev, errp)) {
-        return;
-    }
-
-    virtio_init(vdev, VIRTIO_ID_GPIO, sizeof(gpio->config));
-
-    gpio->command_vq = virtio_add_queue(vdev, 256, vu_gpio_handle_output);
-    gpio->interrupt_vq = virtio_add_queue(vdev, 256, vu_gpio_handle_output);
-    gpio->vhost_vqs = g_new0(struct vhost_virtqueue, VHOST_NVQS);
-
-    gpio->connected = false;
-
-    qemu_chr_fe_set_handlers(&gpio->chardev, NULL, NULL, vu_gpio_event, NULL,
-                             dev, NULL, true);
-
-    retries = REALIZE_CONNECTION_RETRIES;
-    g_assert(!*errp);
-    do {
-        if (*errp) {
-            error_prepend(errp, "Reconnecting after error: ");
-            error_report_err(*errp);
-            *errp = NULL;
-        }
-        ret = vu_gpio_realize_connect(gpio, errp);
-    } while (ret < 0 && retries--);
-
-    if (ret < 0) {
-        do_vhost_user_cleanup(vdev, gpio);
-    }
-
-    return;
-}
-
-static void vu_gpio_device_unrealize(DeviceState *dev)
-{
-    VirtIODevice *vdev = VIRTIO_DEVICE(dev);
-    VHostUserGPIO *gpio = VHOST_USER_GPIO(dev);
-
-    vu_gpio_set_status(vdev, 0);
-    qemu_chr_fe_set_handlers(&gpio->chardev, NULL, NULL, NULL, NULL, NULL, NULL,
-                             false);
-    vhost_dev_cleanup(&gpio->vhost_dev);
-    do_vhost_user_cleanup(vdev, gpio);
+    vubc->parent_realize(dev, errp);
 }
 
 static const VMStateDescription vu_gpio_vmstate = {
@@ -394,30 +37,21 @@  static const VMStateDescription vu_gpio_vmstate = {
     .unmigratable = 1,
 };
 
-static Property vu_gpio_properties[] = {
-    DEFINE_PROP_CHR("chardev", VHostUserGPIO, chardev),
-    DEFINE_PROP_END_OF_LIST(),
-};
-
 static void vu_gpio_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
-    VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass);
+    VHostUserBaseClass *vubc = VHOST_USER_BASE_CLASS(klass);
 
-    device_class_set_props(dc, vu_gpio_properties);
     dc->vmsd = &vu_gpio_vmstate;
+    device_class_set_props(dc, vgpio_properties);
+    device_class_set_parent_realize(dc, vgpio_realize,
+                                    &vubc->parent_realize);
     set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
-    vdc->realize = vu_gpio_device_realize;
-    vdc->unrealize = vu_gpio_device_unrealize;
-    vdc->get_features = vu_gpio_get_features;
-    vdc->get_config = vu_gpio_get_config;
-    vdc->set_status = vu_gpio_set_status;
-    vdc->guest_notifier_mask = vu_gpio_guest_notifier_mask;
 }
 
 static const TypeInfo vu_gpio_info = {
     .name = TYPE_VHOST_USER_GPIO,
-    .parent = TYPE_VIRTIO_DEVICE,
+    .parent = TYPE_VHOST_USER_BASE,
     .instance_size = sizeof(VHostUserGPIO),
     .class_init = vu_gpio_class_init,
 };
diff --git a/hw/virtio/meson.build b/hw/virtio/meson.build
index de442dcb96..8c6cb2143d 100644
--- a/hw/virtio/meson.build
+++ b/hw/virtio/meson.build
@@ -7,6 +7,9 @@  softmmu_virtio_ss.add(when: 'CONFIG_VIRTIO_MMIO', if_true: files('virtio-mmio.c'
 softmmu_virtio_ss.add(when: 'CONFIG_VHOST_USER_RNG', if_true: files('vhost-user-rng.c'))
 softmmu_virtio_ss.add(when: ['CONFIG_VIRTIO_PCI', 'CONFIG_VHOST_USER_RNG'],
                       if_true: files('vhost-user-rng-pci.c'))
+softmmu_virtio_ss.add(when: 'CONFIG_VHOST_USER_GPIO', if_true: files('vhost-user-gpio.c'))
+softmmu_virtio_ss.add(when: ['CONFIG_VIRTIO_PCI', 'CONFIG_VHOST_USER_GPIO'],
+                      if_true: files('vhost-user-gpio-pci.c'))
 
 specific_virtio_ss = ss.source_set()
 specific_virtio_ss.add(files('virtio.c'))
@@ -37,8 +40,6 @@  specific_virtio_ss.add(when: 'CONFIG_VIRTIO_RNG', if_true: files('virtio-rng.c')
 specific_virtio_ss.add(when: 'CONFIG_VIRTIO_IOMMU', if_true: files('virtio-iommu.c'))
 specific_virtio_ss.add(when: 'CONFIG_VIRTIO_MEM', if_true: files('virtio-mem.c'))
 specific_virtio_ss.add(when: 'CONFIG_VHOST_USER_I2C', if_true: files('vhost-user-i2c.c'))
-specific_virtio_ss.add(when: 'CONFIG_VHOST_USER_GPIO', if_true: files('vhost-user-gpio.c'))
-specific_virtio_ss.add(when: ['CONFIG_VIRTIO_PCI', 'CONFIG_VHOST_USER_GPIO'], if_true: files('vhost-user-gpio-pci.c'))
 specific_virtio_ss.add(when: 'CONFIG_VHOST_VDPA_DEV', if_true: files('vdpa-dev.c'))
 
 virtio_pci_ss = ss.source_set()