diff mbox series

[net-next,v7,08/16] net: phy: phy_device: Call into the PHY driver to set LED blinking

Message ID 20230417151738.19426-9-ansuelsmth@gmail.com
State New
Headers show
Series net: Add basic LED support for switch/phy | expand

Commit Message

Christian Marangi April 17, 2023, 3:17 p.m. UTC
From: Andrew Lunn <andrew@lunn.ch>

Linux LEDs can be requested to perform hardware accelerated
blinking. Pass this to the PHY driver, if it implements the op.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/phy/phy_device.c | 18 ++++++++++++++++++
 include/linux/phy.h          | 12 ++++++++++++
 2 files changed, 30 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 5c1200160c51..538523a7cd51 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -3005,6 +3005,22 @@  static int phy_led_set_brightness(struct led_classdev *led_cdev,
 	return err;
 }
 
+static int phy_led_blink_set(struct led_classdev *led_cdev,
+			     unsigned long *delay_on,
+			     unsigned long *delay_off)
+{
+	struct phy_led *phyled = to_phy_led(led_cdev);
+	struct phy_device *phydev = phyled->phydev;
+	int err;
+
+	mutex_lock(&phydev->lock);
+	err = phydev->drv->led_blink_set(phydev, phyled->index,
+					 delay_on, delay_off);
+	mutex_unlock(&phydev->lock);
+
+	return err;
+}
+
 static int of_phy_led(struct phy_device *phydev,
 		      struct device_node *led)
 {
@@ -3027,6 +3043,8 @@  static int of_phy_led(struct phy_device *phydev,
 
 	if (phydev->drv->led_brightness_set)
 		cdev->brightness_set_blocking = phy_led_set_brightness;
+	if (phydev->drv->led_blink_set)
+		cdev->blink_set = phy_led_blink_set;
 	cdev->max_brightness = 1;
 	init_data.devicename = dev_name(&phydev->mdio.dev);
 	init_data.fwnode = of_fwnode_handle(led);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index f3c7e3c99f24..c5a0dc829714 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1085,6 +1085,18 @@  struct phy_driver {
 	 */
 	int (*led_brightness_set)(struct phy_device *dev,
 				  u8 index, enum led_brightness value);
+
+	/**
+	 * @led_blink_set: Set a PHY LED brightness.  Index indicates
+	 * which of the PHYs led should be configured to blink. Delays
+	 * are in milliseconds and if both are zero then a sensible
+	 * default should be chosen.  The call should adjust the
+	 * timings in that case and if it can't match the values
+	 * specified exactly.
+	 */
+	int (*led_blink_set)(struct phy_device *dev, u8 index,
+			     unsigned long *delay_on,
+			     unsigned long *delay_off);
 };
 #define to_phy_driver(d) container_of(to_mdio_common_driver(d),		\
 				      struct phy_driver, mdiodrv)