diff mbox series

[net-next,v3,1/8] net: txgbe: Add software nodes to support phylink

Message ID 20230419082739.295180-2-jiawenwu@trustnetic.com
State Superseded
Headers show
Series TXGBE PHYLINK support | expand

Commit Message

Jiawen Wu April 19, 2023, 8:27 a.m. UTC
Register software nodes for GPIO, I2C, SFP and PHYLINK. Define the
device properties.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
 drivers/net/ethernet/wangxun/libwx/wx_type.h  |  1 +
 drivers/net/ethernet/wangxun/txgbe/Makefile   |  1 +
 .../net/ethernet/wangxun/txgbe/txgbe_main.c   | 20 ++++-
 .../net/ethernet/wangxun/txgbe/txgbe_phy.c    | 88 +++++++++++++++++++
 .../net/ethernet/wangxun/txgbe/txgbe_phy.h    | 10 +++
 .../net/ethernet/wangxun/txgbe/txgbe_type.h   | 49 +++++++++++
 6 files changed, 168 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
 create mode 100644 drivers/net/ethernet/wangxun/txgbe/txgbe_phy.h

Comments

Andrew Lunn April 19, 2023, 8:53 p.m. UTC | #1
On Wed, Apr 19, 2023 at 04:27:32PM +0800, Jiawen Wu wrote:
> Register software nodes for GPIO, I2C, SFP and PHYLINK. Define the
> device properties.
> 
> Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
diff mbox series

Patch

diff --git a/drivers/net/ethernet/wangxun/libwx/wx_type.h b/drivers/net/ethernet/wangxun/libwx/wx_type.h
index 32f952d93009..97bce855bc60 100644
--- a/drivers/net/ethernet/wangxun/libwx/wx_type.h
+++ b/drivers/net/ethernet/wangxun/libwx/wx_type.h
@@ -611,6 +611,7 @@  enum wx_isb_idx {
 
 struct wx {
 	u8 __iomem *hw_addr;
+	void *priv;
 	struct pci_dev *pdev;
 	struct net_device *netdev;
 	struct wx_bus_info bus;
diff --git a/drivers/net/ethernet/wangxun/txgbe/Makefile b/drivers/net/ethernet/wangxun/txgbe/Makefile
index 6db14a2cb2d0..7507f762edfe 100644
--- a/drivers/net/ethernet/wangxun/txgbe/Makefile
+++ b/drivers/net/ethernet/wangxun/txgbe/Makefile
@@ -8,4 +8,5 @@  obj-$(CONFIG_TXGBE) += txgbe.o
 
 txgbe-objs := txgbe_main.o \
               txgbe_hw.o \
+              txgbe_phy.o \
               txgbe_ethtool.o
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
index 5b8a121fb496..dbd4d409d93b 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
@@ -15,6 +15,7 @@ 
 #include "../libwx/wx_hw.h"
 #include "txgbe_type.h"
 #include "txgbe_hw.h"
+#include "txgbe_phy.h"
 #include "txgbe_ethtool.h"
 
 char txgbe_driver_name[] = "txgbe";
@@ -513,6 +514,7 @@  static int txgbe_probe(struct pci_dev *pdev,
 	struct net_device *netdev;
 	int err, expected_gts;
 	struct wx *wx = NULL;
+	struct txgbe *txgbe;
 
 	u16 eeprom_verh = 0, eeprom_verl = 0, offset = 0;
 	u16 eeprom_cfg_blkh = 0, eeprom_cfg_blkl = 0;
@@ -663,10 +665,21 @@  static int txgbe_probe(struct pci_dev *pdev,
 			 "0x%08x", etrack_id);
 	}
 
-	err = register_netdev(netdev);
+	txgbe = devm_kzalloc(&pdev->dev, sizeof(*txgbe), GFP_KERNEL);
+	if (!txgbe)
+		return -ENOMEM;
+
+	txgbe->wx = wx;
+	wx->priv = txgbe;
+
+	err = txgbe_init_phy(txgbe);
 	if (err)
 		goto err_release_hw;
 
+	err = register_netdev(netdev);
+	if (err)
+		goto err_remove_phy;
+
 	pci_set_drvdata(pdev, wx);
 
 	netif_tx_stop_all_queues(netdev);
@@ -694,6 +707,8 @@  static int txgbe_probe(struct pci_dev *pdev,
 
 	return 0;
 
+err_remove_phy:
+	txgbe_remove_phy(txgbe);
 err_release_hw:
 	wx_clear_interrupt_scheme(wx);
 	wx_control_hw(wx, false);
@@ -719,11 +734,14 @@  static int txgbe_probe(struct pci_dev *pdev,
 static void txgbe_remove(struct pci_dev *pdev)
 {
 	struct wx *wx = pci_get_drvdata(pdev);
+	struct txgbe *txgbe = wx->priv;
 	struct net_device *netdev;
 
 	netdev = wx->netdev;
 	unregister_netdev(netdev);
 
+	txgbe_remove_phy(txgbe);
+
 	pci_release_selected_regions(pdev,
 				     pci_select_bars(pdev, IORESOURCE_MEM));
 
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
new file mode 100644
index 000000000000..39762c7fc851
--- /dev/null
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
@@ -0,0 +1,88 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2015 - 2023 Beijing WangXun Technology Co., Ltd. */
+
+#include <linux/gpio/property.h>
+#include <linux/i2c.h>
+#include <linux/pci.h>
+
+#include "../libwx/wx_type.h"
+#include "txgbe_type.h"
+#include "txgbe_phy.h"
+
+static int txgbe_swnodes_register(struct txgbe *txgbe)
+{
+	struct txgbe_nodes *nodes = &txgbe->nodes;
+	struct pci_dev *pdev = txgbe->wx->pdev;
+	struct software_node *swnodes;
+	u32 id;
+
+	id = (pdev->bus->number << 8) | pdev->devfn;
+
+	snprintf(nodes->gpio_name, sizeof(nodes->gpio_name), "txgbe_gpio-%x", id);
+	snprintf(nodes->i2c_name, sizeof(nodes->i2c_name), "txgbe_i2c-%x", id);
+	snprintf(nodes->sfp_name, sizeof(nodes->sfp_name), "txgbe_sfp-%x", id);
+	snprintf(nodes->phylink_name, sizeof(nodes->phylink_name), "txgbe_phylink-%x", id);
+
+	swnodes = nodes->swnodes;
+
+	/* GPIO 0: tx fault
+	 * GPIO 1: tx disable
+	 * GPIO 2: sfp module absent
+	 * GPIO 3: rx signal lost
+	 * GPIO 4: rate select, 1G(0) 10G(1)
+	 * GPIO 5: rate select, 1G(0) 10G(1)
+	 */
+	nodes->gpio_props[0] = PROPERTY_ENTRY_STRING("pinctrl-names", "default");
+	swnodes[SWNODE_GPIO] = NODE_PROP(nodes->gpio_name, nodes->gpio_props);
+	nodes->gpio0_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_GPIO], 0, GPIO_ACTIVE_HIGH);
+	nodes->gpio1_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_GPIO], 1, GPIO_ACTIVE_HIGH);
+	nodes->gpio2_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_GPIO], 2, GPIO_ACTIVE_LOW);
+	nodes->gpio3_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_GPIO], 3, GPIO_ACTIVE_HIGH);
+	nodes->gpio4_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_GPIO], 4, GPIO_ACTIVE_HIGH);
+	nodes->gpio5_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_GPIO], 5, GPIO_ACTIVE_HIGH);
+
+	nodes->i2c_props[0] = PROPERTY_ENTRY_STRING("compatible", "snps,designware-i2c");
+	nodes->i2c_props[1] = PROPERTY_ENTRY_U32("clock-frequency", I2C_MAX_STANDARD_MODE_FREQ);
+	swnodes[SWNODE_I2C] = NODE_PROP(nodes->i2c_name, nodes->i2c_props);
+	nodes->i2c_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_I2C]);
+
+	nodes->sfp_props[0] = PROPERTY_ENTRY_STRING("compatible", "sff,sfp");
+	nodes->sfp_props[1] = PROPERTY_ENTRY_REF_ARRAY("i2c-bus", nodes->i2c_ref);
+	nodes->sfp_props[2] = PROPERTY_ENTRY_REF_ARRAY("tx-fault-gpios", nodes->gpio0_ref);
+	nodes->sfp_props[3] = PROPERTY_ENTRY_REF_ARRAY("tx-disable-gpios", nodes->gpio1_ref);
+	nodes->sfp_props[4] = PROPERTY_ENTRY_REF_ARRAY("mod-def0-gpios", nodes->gpio2_ref);
+	nodes->sfp_props[5] = PROPERTY_ENTRY_REF_ARRAY("los-gpios", nodes->gpio3_ref);
+	nodes->sfp_props[6] = PROPERTY_ENTRY_REF_ARRAY("rate-select1-gpios", nodes->gpio4_ref);
+	nodes->sfp_props[7] = PROPERTY_ENTRY_REF_ARRAY("rate-select0-gpios", nodes->gpio5_ref);
+	swnodes[SWNODE_SFP] = NODE_PROP(nodes->sfp_name, nodes->sfp_props);
+	nodes->sfp_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_SFP]);
+
+	nodes->phylink_props[0] = PROPERTY_ENTRY_STRING("managed", "in-band-status");
+	nodes->phylink_props[1] = PROPERTY_ENTRY_REF_ARRAY("sfp", nodes->sfp_ref);
+	swnodes[SWNODE_PHYLINK] = NODE_PROP(nodes->phylink_name, nodes->phylink_props);
+
+	nodes->group[SWNODE_GPIO] = &swnodes[SWNODE_GPIO];
+	nodes->group[SWNODE_I2C] = &swnodes[SWNODE_I2C];
+	nodes->group[SWNODE_SFP] = &swnodes[SWNODE_SFP];
+	nodes->group[SWNODE_PHYLINK] = &swnodes[SWNODE_PHYLINK];
+
+	return software_node_register_node_group(nodes->group);
+}
+
+int txgbe_init_phy(struct txgbe *txgbe)
+{
+	int ret;
+
+	ret = txgbe_swnodes_register(txgbe);
+	if (ret) {
+		wx_err(txgbe->wx, "failed to register software nodes\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+void txgbe_remove_phy(struct txgbe *txgbe)
+{
+	software_node_unregister_node_group(txgbe->nodes.group);
+}
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.h b/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.h
new file mode 100644
index 000000000000..1ab592124986
--- /dev/null
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.h
@@ -0,0 +1,10 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2015 - 2023 Beijing WangXun Technology Co., Ltd. */
+
+#ifndef _TXGBE_PHY_H_
+#define _TXGBE_PHY_H_
+
+int txgbe_init_phy(struct txgbe *txgbe);
+void txgbe_remove_phy(struct txgbe *txgbe);
+
+#endif /* _TXGBE_NODE_H_ */
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h
index 63a1c733718d..51bbecb28433 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h
@@ -4,6 +4,8 @@ 
 #ifndef _TXGBE_TYPE_H_
 #define _TXGBE_TYPE_H_
 
+#include <linux/property.h>
+
 /* Device IDs */
 #define TXGBE_DEV_ID_SP1000                     0x1001
 #define TXGBE_DEV_ID_WX1820                     0x2001
@@ -99,4 +101,51 @@ 
 
 extern char txgbe_driver_name[];
 
+static inline struct txgbe *netdev_to_txgbe(struct net_device *netdev)
+{
+	struct wx *wx = netdev_priv(netdev);
+
+	return wx->priv;
+}
+
+#define NODE_PROP(_NAME, _PROP)			\
+	(const struct software_node) {		\
+		.name = _NAME,			\
+		.properties = _PROP,		\
+	}
+
+enum txgbe_swnodes {
+	SWNODE_GPIO = 0,
+	SWNODE_I2C,
+	SWNODE_SFP,
+	SWNODE_PHYLINK,
+	SWNODE_MAX
+};
+
+struct txgbe_nodes {
+	char gpio_name[32];
+	char i2c_name[32];
+	char sfp_name[32];
+	char phylink_name[32];
+	struct property_entry gpio_props[1];
+	struct property_entry i2c_props[2];
+	struct property_entry sfp_props[8];
+	struct property_entry phylink_props[2];
+	struct software_node_ref_args i2c_ref[1];
+	struct software_node_ref_args gpio0_ref[1];
+	struct software_node_ref_args gpio1_ref[1];
+	struct software_node_ref_args gpio2_ref[1];
+	struct software_node_ref_args gpio3_ref[1];
+	struct software_node_ref_args gpio4_ref[1];
+	struct software_node_ref_args gpio5_ref[1];
+	struct software_node_ref_args sfp_ref[1];
+	struct software_node swnodes[SWNODE_MAX];
+	const struct software_node *group[SWNODE_MAX + 1];
+};
+
+struct txgbe {
+	struct wx *wx;
+	struct txgbe_nodes nodes;
+};
+
 #endif /* _TXGBE_TYPE_H_ */