| Message ID | 20230419060639.38853-2-jaewon02.kim@samsung.com |
|---|---|
| State | New |
| Headers | show |
| Series | Improves polling mode of s3c64xx driver | expand |
On 23. 4. 19. 17:03, Krzysztof Kozlowski wrote: > On 19/04/2023 08:06, Jaewon Kim wrote: >> Polling mode supported with qurik if there was no DMA in the SOC. > typo: quirk > You missed verb in your first part of sentence. I don't understand it. Sorry, I change this sentence like below. Polling mode supported as a quirk for SOCs without DMA. > >> However, there are cased where we cannot or do not want to use DMA. >> To support this case, if DMA is not set, it is switched to polling mode. >> >> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> >> --- >> drivers/spi/spi-s3c64xx.c | 8 ++++++-- >> include/linux/platform_data/spi-s3c64xx.h | 1 + >> 2 files changed, 7 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c >> index 71d324ec9a70..273aa02322d9 100644 >> --- a/drivers/spi/spi-s3c64xx.c >> +++ b/drivers/spi/spi-s3c64xx.c >> @@ -19,7 +19,6 @@ >> #include <linux/platform_data/spi-s3c64xx.h> >> >> #define MAX_SPI_PORTS 12 >> -#define S3C64XX_SPI_QUIRK_POLL (1 << 0) >> #define S3C64XX_SPI_QUIRK_CS_AUTO (1 << 1) >> #define AUTOSUSPEND_TIMEOUT 2000 >> >> @@ -116,7 +115,7 @@ >> #define S3C64XX_SPI_TRAILCNT S3C64XX_SPI_MAX_TRAILCNT >> >> #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) >> -#define is_polling(x) (x->port_conf->quirks & S3C64XX_SPI_QUIRK_POLL) >> +#define is_polling(x) (x->cntrlr_info->polling) >> >> #define RXBUSY (1<<2) >> #define TXBUSY (1<<3) >> @@ -1067,6 +1066,11 @@ static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev) >> sci->num_cs = temp; >> } >> >> + if (!of_find_property(dev->of_node, "dmas", NULL)) { >> + dev_warn(dev, "cannot find DMA, changed to PIO mode\n"); > You said it is desired option, so should not be a warning. I would make > it debug at most. > Okay, I will change dev_warn() to dev_dbg(). >> + sci->polling = 1; > > > Best regards, > Krzysztof > > Thanks Jaewon Kim
Hi Jaewon, On Wed, Apr 19, 2023 at 03:06:36PM +0900, Jaewon Kim wrote: > Polling mode supported with qurik if there was no DMA in the SOC. I think you want to say here that "Through quirks we choose to use polling mode whenever there is no DMA in the SoC". > However, there are cased where we cannot or do not want to use DMA. /cased/cases/ > To support this case, if DMA is not set, it is switched to polling mode. You haven't really described what you are doing here... you could just write something like: "Use DTS properties to select wether to use polling or DMA mode." Side note, please use the imperative form when you want to describe what you have done to fix the issue. > Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> > --- > drivers/spi/spi-s3c64xx.c | 8 ++++++-- > include/linux/platform_data/spi-s3c64xx.h | 1 + > 2 files changed, 7 insertions(+), 2 deletions(-) > > diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c > index 71d324ec9a70..273aa02322d9 100644 > --- a/drivers/spi/spi-s3c64xx.c > +++ b/drivers/spi/spi-s3c64xx.c > @@ -19,7 +19,6 @@ > #include <linux/platform_data/spi-s3c64xx.h> > > #define MAX_SPI_PORTS 12 > -#define S3C64XX_SPI_QUIRK_POLL (1 << 0) > #define S3C64XX_SPI_QUIRK_CS_AUTO (1 << 1) > #define AUTOSUSPEND_TIMEOUT 2000 > > @@ -116,7 +115,7 @@ > #define S3C64XX_SPI_TRAILCNT S3C64XX_SPI_MAX_TRAILCNT > > #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) > -#define is_polling(x) (x->port_conf->quirks & S3C64XX_SPI_QUIRK_POLL) > +#define is_polling(x) (x->cntrlr_info->polling) > > #define RXBUSY (1<<2) > #define TXBUSY (1<<3) > @@ -1067,6 +1066,11 @@ static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev) > sci->num_cs = temp; > } > > + if (!of_find_property(dev->of_node, "dmas", NULL)) { > + dev_warn(dev, "cannot find DMA, changed to PIO mode\n"); > + sci->polling = 1; sci->polling = true; But it could be even better: sci->polling = !of_find_property(dev->of_node, "dmas", NULL)); and you get rid of the dev_warn() that is not required. Andi
On 19/04/2023 08:06, Jaewon Kim wrote: > Polling mode supported with qurik if there was no DMA in the SOC. > However, there are cased where we cannot or do not want to use DMA. > To support this case, if DMA is not set, it is switched to polling mode. > (...) > #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) > -#define is_polling(x) (x->port_conf->quirks & S3C64XX_SPI_QUIRK_POLL) > +#define is_polling(x) (x->cntrlr_info->polling) > > #define RXBUSY (1<<2) > #define TXBUSY (1<<3) > @@ -1067,6 +1066,11 @@ static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev) > sci->num_cs = temp; > } > > + if (!of_find_property(dev->of_node, "dmas", NULL)) { of_property_present() Best regards, Krzysztof
Hi Andi, On 23. 4. 20. 00:46, Andi Shyti wrote: > Hi Jaewon, > > On Wed, Apr 19, 2023 at 03:06:36PM +0900, Jaewon Kim wrote: >> Polling mode supported with qurik if there was no DMA in the SOC. > I think you want to say here that "Through quirks we choose to > use polling mode whenever there is no DMA in the SoC". > >> However, there are cased where we cannot or do not want to use DMA. > /cased/cases/ > >> To support this case, if DMA is not set, it is switched to polling mode. > You haven't really described what you are doing here... you could > just write something like: "Use DTS properties to select wether > to use polling or DMA mode." > > Side note, please use the imperative form when you want to > describe what you have done to fix the issue. Thanks for guide. I will change description in v3. > >> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> >> --- >> drivers/spi/spi-s3c64xx.c | 8 ++++++-- >> include/linux/platform_data/spi-s3c64xx.h | 1 + >> 2 files changed, 7 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c >> index 71d324ec9a70..273aa02322d9 100644 >> --- a/drivers/spi/spi-s3c64xx.c >> +++ b/drivers/spi/spi-s3c64xx.c >> @@ -19,7 +19,6 @@ >> #include <linux/platform_data/spi-s3c64xx.h> >> >> #define MAX_SPI_PORTS 12 >> -#define S3C64XX_SPI_QUIRK_POLL (1 << 0) >> #define S3C64XX_SPI_QUIRK_CS_AUTO (1 << 1) >> #define AUTOSUSPEND_TIMEOUT 2000 >> >> @@ -116,7 +115,7 @@ >> #define S3C64XX_SPI_TRAILCNT S3C64XX_SPI_MAX_TRAILCNT >> >> #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) >> -#define is_polling(x) (x->port_conf->quirks & S3C64XX_SPI_QUIRK_POLL) >> +#define is_polling(x) (x->cntrlr_info->polling) >> >> #define RXBUSY (1<<2) >> #define TXBUSY (1<<3) >> @@ -1067,6 +1066,11 @@ static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev) >> sci->num_cs = temp; >> } >> >> + if (!of_find_property(dev->of_node, "dmas", NULL)) { >> + dev_warn(dev, "cannot find DMA, changed to PIO mode\n"); >> + sci->polling = 1; > sci->polling = true; > > But it could be even better: > > sci->polling = !of_find_property(dev->of_node, "dmas", NULL)); > > and you get rid of the dev_warn() that is not required. > > Andi Okay, I will change 1 to 'true'.. Thanks Jaewon Kim
On 23. 4. 21. 00:40, Krzysztof Kozlowski wrote: > On 19/04/2023 08:06, Jaewon Kim wrote: >> Polling mode supported with qurik if there was no DMA in the SOC. >> However, there are cased where we cannot or do not want to use DMA. >> To support this case, if DMA is not set, it is switched to polling mode. >> > (...) > >> #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) >> -#define is_polling(x) (x->port_conf->quirks & S3C64XX_SPI_QUIRK_POLL) >> +#define is_polling(x) (x->cntrlr_info->polling) >> >> #define RXBUSY (1<<2) >> #define TXBUSY (1<<3) >> @@ -1067,6 +1066,11 @@ static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev) >> sci->num_cs = temp; >> } >> >> + if (!of_find_property(dev->of_node, "dmas", NULL)) { > of_property_present() I will change it to of_property_present(). > > Best regards, > Krzysztof > > Thanks Jaewon Kim
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 71d324ec9a70..273aa02322d9 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -19,7 +19,6 @@ #include <linux/platform_data/spi-s3c64xx.h> #define MAX_SPI_PORTS 12 -#define S3C64XX_SPI_QUIRK_POLL (1 << 0) #define S3C64XX_SPI_QUIRK_CS_AUTO (1 << 1) #define AUTOSUSPEND_TIMEOUT 2000 @@ -116,7 +115,7 @@ #define S3C64XX_SPI_TRAILCNT S3C64XX_SPI_MAX_TRAILCNT #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) -#define is_polling(x) (x->port_conf->quirks & S3C64XX_SPI_QUIRK_POLL) +#define is_polling(x) (x->cntrlr_info->polling) #define RXBUSY (1<<2) #define TXBUSY (1<<3) @@ -1067,6 +1066,11 @@ static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev) sci->num_cs = temp; } + if (!of_find_property(dev->of_node, "dmas", NULL)) { + dev_warn(dev, "cannot find DMA, changed to PIO mode\n"); + sci->polling = 1; + } + sci->no_cs = of_property_read_bool(dev->of_node, "no-cs-readback"); return sci; diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h index 5df1ace6d2c9..cb7b8ddc899f 100644 --- a/include/linux/platform_data/spi-s3c64xx.h +++ b/include/linux/platform_data/spi-s3c64xx.h @@ -35,6 +35,7 @@ struct s3c64xx_spi_info { int src_clk_nr; int num_cs; bool no_cs; + bool polling; int (*cfg_gpio)(void); };
Polling mode supported with qurik if there was no DMA in the SOC. However, there are cased where we cannot or do not want to use DMA. To support this case, if DMA is not set, it is switched to polling mode. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> --- drivers/spi/spi-s3c64xx.c | 8 ++++++-- include/linux/platform_data/spi-s3c64xx.h | 1 + 2 files changed, 7 insertions(+), 2 deletions(-)