diff mbox series

[v3,7/7] usb: mtu3: add optional clock xhci_ck and frmcnt_ck

Message ID 20230417025203.18097-7-chunfeng.yun@mediatek.com
State New
Headers show
Series [v3,1/7] usb: mtu3: give back request when rx error happens | expand

Commit Message

Chunfeng Yun (云春峰) April 17, 2023, 2:52 a.m. UTC 
Add optional clock 'xhci_ck' which is usually the same as sys_ck, but
some SoC use two separated clocks when the controller supports dual
role mode;
Add optional clock 'frmcnt_ck' used on 4nm or advanced process SoC.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~v3: no changes
---
 drivers/usb/mtu3/mtu3.h      | 2 +-
 drivers/usb/mtu3/mtu3_plat.c | 2 ++
 2 files changed, 3 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h
index 2d7b57e07eee..b4a7662dded5 100644
--- a/drivers/usb/mtu3/mtu3.h
+++ b/drivers/usb/mtu3/mtu3.h
@@ -90,7 +90,7 @@  struct mtu3_request;
  */
 #define EP0_RESPONSE_BUF  6
 
-#define BULK_CLKS_CNT	4
+#define BULK_CLKS_CNT	6
 
 /* device operated link and speed got from DEVICE_CONF register */
 enum mtu3_speed {
diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c
index d78ae52b4e26..6f264b129243 100644
--- a/drivers/usb/mtu3/mtu3_plat.c
+++ b/drivers/usb/mtu3/mtu3_plat.c
@@ -234,6 +234,8 @@  static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
 	clks[1].id = "ref_ck";
 	clks[2].id = "mcu_ck";
 	clks[3].id = "dma_ck";
+	clks[4].id = "xhci_ck";
+	clks[5].id = "frmcnt_ck";
 	ret = devm_clk_bulk_get_optional(dev, BULK_CLKS_CNT, clks);
 	if (ret)
 		return ret;