diff mbox series

arm: dts: k3-am62a7-sk: Describe main_uart1 and wkup_uart

Message ID 20230424183355.68360-1-bb@ti.com
State Superseded
Headers show
Series arm: dts: k3-am62a7-sk: Describe main_uart1 and wkup_uart | expand

Commit Message

Bryan Brattlof April 24, 2023, 6:33 p.m. UTC 
From: Nishanth Menon <nm@ti.com>

wkup_uart and main_uart1 on this platform is used by tifs and DM
firmwares. Describe them for completeness including the pinmux.

Signed-off-by: Nishanth Menon <nm@ti.com>
[bb@ti.com: updated pinmux]
Signed-off-by: Bryan Brattlof <bb@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 40 +++++++++++++++++++++++--
 1 file changed, 38 insertions(+), 2 deletions(-)


base-commit: 891db0c48efb48c3af334006f9d7ea6a0aa49cb9

Comments

Bryan Brattlof April 25, 2023, 1:19 p.m. UTC | #1 
Hi Nishanth!

On April 25, 2023 thus sayeth Nishanth Menon:
> Please fix $subject: arm64: dts: ti:
> 

Oops! I'll get that fixed up

~Bryan
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index f6a67f072dca6..65caa5611d6d5 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -17,7 +17,9 @@  / {
 	model = "Texas Instruments AM62A7 SK";
 
 	aliases {
+		serial0 = &wkup_uart0;
 		serial2 = &main_uart0;
+		serial3 = &main_uart1;
 		mmc1 = &sdhci1;
 	};
 
@@ -114,11 +116,38 @@  led-0 {
 	};
 };
 
+&mcu_pmx0 {
+	wkup_uart0_pins_default: wkup-uart0-pins-default {
+		pinctrl-single,pins = <
+			AM62AX_MCU_IOPAD(0x0024, PIN_INPUT, 0) /* (C9) WKUP_UART0_RXD */
+			AM62AX_MCU_IOPAD(0x0028, PIN_OUTPUT, 0) /* (E9) WKUP_UART0_TXD */
+			AM62AX_MCU_IOPAD(0x002c, PIN_INPUT, 0) /* (C10) WKUP_UART0_CTSn */
+			AM62AX_MCU_IOPAD(0x0030, PIN_OUTPUT, 0) /* (C8) WKUP_UART0_RTSn */
+		>;
+	};
+};
+
+/* WKUP UART0 is used for DM firmware logs */
+&wkup_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+	status = "reserved";
+};
+
 &main_pmx0 {
 	main_uart0_pins_default: main-uart0-pins-default {
 		pinctrl-single,pins = <
-			AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
-			AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
+			AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (E14) UART0_RXD */
+			AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-pins-default {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x01e8, PIN_INPUT, 1) /* (C17) I2C1_SCL.UART1_RXD */
+			AM62AX_IOPAD(0x01ec, PIN_OUTPUT, 1) /* (E17) I2C1_SDA.UART1_TXD */
+			AM62AX_IOPAD(0x0194, PIN_INPUT, 2) /* (C19) MCASP0_AXR3.UART1_CTSn */
+			AM62AX_IOPAD(0x0198, PIN_OUTPUT, 2) /* (B19) MCASP0_AXR2.UART1_RTSn */
 		>;
 	};
 
@@ -254,6 +283,13 @@  &main_uart0 {
 	pinctrl-0 = <&main_uart0_pins_default>;
 };
 
+/* Main UART1 is used for TIFS firmware logs */
+&main_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+	status = "reserved";
+};
+
 &usbss1 {
 	status = "okay";
 };