diff mbox series

[v2,2/2] arm64: dts: imx8qxp: add adma_pwm in adma

Message ID 20230424082108.26512-2-alexander.stein@ew.tq-group.com
State Accepted
Commit f1d6a6b991ef9864dec6437ecf8162dc2ec42260
Headers show
Series [v2,1/2] dt-bindings: pwm: imx: add i.MX8QXP compatible | expand

Commit Message

Alexander Stein April 24, 2023, 8:21 a.m. UTC
Add PWM device and the corresponding clock gating device in adma subsystem.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
* New in v2

 .../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

Comments

Alexander Stein May 31, 2023, 7:55 a.m. UTC | #1
Hi,

Am Montag, 24. April 2023, 10:21:08 CEST schrieb Alexander Stein:
> Add PWM device and the corresponding clock gating device in adma subsystem.

Gentle ping.

Best regards,
Alexander

> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> ---
> * New in v2
> 
>  .../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 25 +++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
> b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi index
> 2dce8f2ee3ea..7d5f96c99020 100644
> --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
> @@ -124,6 +124,19 @@ lpuart3: serial@5a090000 {
>  		status = "disabled";
>  	};
> 
> +	adma_pwm: pwm@5a190000 {
> +		compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
> +		reg = <0x5a190000 0x1000>;
> +		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&adma_pwm_lpcg 1>,
> +			 <&adma_pwm_lpcg 0>;
> +		clock-names = "ipg", "per";
> +		assigned-clocks = <&clk IMX_SC_R_LCD_0_PWM_0 
IMX_SC_PM_CLK_PER>;
> +		assigned-clock-rates = <24000000>;
> +		#pwm-cells = <2>;
> +		power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>;
> +	};
> +
>  	spi0_lpcg: clock-controller@5a400000 {
>  		compatible = "fsl,imx8qxp-lpcg";
>  		reg = <0x5a400000 0x10000>;
> @@ -220,6 +233,18 @@ uart3_lpcg: clock-controller@5a490000 {
>  		power-domains = <&pd IMX_SC_R_UART_3>;
>  	};
> 
> +	adma_pwm_lpcg: clock-controller@5a590000 {
> +		compatible = "fsl,imx8qxp-lpcg";
> +		reg = <0x5a590000 0x10000>;
> +		#clock-cells = <1>;
> +		clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>,
> +			 <&dma_ipg_clk>;
> +		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> +		clock-output-names = "adma_pwm_lpcg_clk",
> +				     "adma_pwm_lpcg_ipg_clk";
> +		power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>;
> +	};
> +
>  	i2c0: i2c@5a800000 {
>  		reg = <0x5a800000 0x4000>;
>  		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
Shawn Guo June 4, 2023, 9:50 a.m. UTC | #2
On Mon, Apr 24, 2023 at 10:21:08AM +0200, Alexander Stein wrote:
> Add PWM device and the corresponding clock gating device in adma subsystem.
> 
> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>

Looks good to me.  I will pick it up after dt-bindings one gets
accepted/picked first.

Shawn

> ---
> * New in v2
> 
>  .../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 25 +++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
> index 2dce8f2ee3ea..7d5f96c99020 100644
> --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
> @@ -124,6 +124,19 @@ lpuart3: serial@5a090000 {
>  		status = "disabled";
>  	};
>  
> +	adma_pwm: pwm@5a190000 {
> +		compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
> +		reg = <0x5a190000 0x1000>;
> +		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&adma_pwm_lpcg 1>,
> +			 <&adma_pwm_lpcg 0>;
> +		clock-names = "ipg", "per";
> +		assigned-clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>;
> +		assigned-clock-rates = <24000000>;
> +		#pwm-cells = <2>;
> +		power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>;
> +	};
> +
>  	spi0_lpcg: clock-controller@5a400000 {
>  		compatible = "fsl,imx8qxp-lpcg";
>  		reg = <0x5a400000 0x10000>;
> @@ -220,6 +233,18 @@ uart3_lpcg: clock-controller@5a490000 {
>  		power-domains = <&pd IMX_SC_R_UART_3>;
>  	};
>  
> +	adma_pwm_lpcg: clock-controller@5a590000 {
> +		compatible = "fsl,imx8qxp-lpcg";
> +		reg = <0x5a590000 0x10000>;
> +		#clock-cells = <1>;
> +		clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>,
> +			 <&dma_ipg_clk>;
> +		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> +		clock-output-names = "adma_pwm_lpcg_clk",
> +				     "adma_pwm_lpcg_ipg_clk";
> +		power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>;
> +	};
> +
>  	i2c0: i2c@5a800000 {
>  		reg = <0x5a800000 0x4000>;
>  		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
> -- 
> 2.34.1
>
Shawn Guo Sept. 19, 2023, 12:17 p.m. UTC | #3
On Thu, Aug 17, 2023 at 10:03:20AM +0200, Alexander Stein wrote:
> Hi Shawn,
> 
> Am Sonntag, 4. Juni 2023, 11:50:38 CEST schrieb Shawn Guo:
> > On Mon, Apr 24, 2023 at 10:21:08AM +0200, Alexander Stein wrote:
> > > Add PWM device and the corresponding clock gating device in adma
> > > subsystem.
> > > 
> > > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> > 
> > Looks good to me.  I will pick it up after dt-bindings one gets
> > accepted/picked first.
> 
> Did this get missed accidentally? Patch 1 was picked by Thierry already.

Sorry, indeed!

Applied, thanks!

Shawn
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index 2dce8f2ee3ea..7d5f96c99020 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -124,6 +124,19 @@  lpuart3: serial@5a090000 {
 		status = "disabled";
 	};
 
+	adma_pwm: pwm@5a190000 {
+		compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
+		reg = <0x5a190000 0x1000>;
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&adma_pwm_lpcg 1>,
+			 <&adma_pwm_lpcg 0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <2>;
+		power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>;
+	};
+
 	spi0_lpcg: clock-controller@5a400000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5a400000 0x10000>;
@@ -220,6 +233,18 @@  uart3_lpcg: clock-controller@5a490000 {
 		power-domains = <&pd IMX_SC_R_UART_3>;
 	};
 
+	adma_pwm_lpcg: clock-controller@5a590000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a590000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "adma_pwm_lpcg_clk",
+				     "adma_pwm_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>;
+	};
+
 	i2c0: i2c@5a800000 {
 		reg = <0x5a800000 0x4000>;
 		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;