diff mbox series

[3/4] Input: pwm-vibra - add support for enable GPIO

Message ID 20230427-hammerhead-vibra-v1-3-e87eeb94da51@z3ntu.xyz
State Accepted
Commit bcf784985e35fc39d682f0dde750162e7f54a1f0
Headers show
Series Add haptics support to Nexus 5 using pwm-vibra driver | expand

Commit Message

Luca Weiss April 27, 2023, 8:34 p.m. UTC
Some pwm vibrators have a dedicated enable GPIO that needs to be set
high so that the vibrator works. Add support for that optionally.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 drivers/input/misc/pwm-vibra.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

Comments

Brian Masney April 27, 2023, 11:29 p.m. UTC | #1
On Thu, Apr 27, 2023 at 10:34:28PM +0200, Luca Weiss wrote:
> Some pwm vibrators have a dedicated enable GPIO that needs to be set
> high so that the vibrator works. Add support for that optionally.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>

Hi Luca,

Thank you for picking up this work!

> +	vibrator->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable",
> +							GPIOD_OUT_LOW);
> +	err = PTR_ERR_OR_ZERO(vibrator->enable_gpio);
> +	if (err) {
> +		if (err != -EPROBE_DEFER)
> +			dev_err(&pdev->dev, "Failed to request enable gpio: %d\n",
> +				err);
> +		return err;
> +	}
> +

Take a look at dev_err_probe() to remove the -EPROBE_DEFER check.

With that fixed:

Reviewed-by: Brian Masney <bmasney@redhat.com>
Caleb Connolly April 28, 2023, 10:11 a.m. UTC | #2
On 27/04/2023 21:34, Luca Weiss wrote:
> Some pwm vibrators have a dedicated enable GPIO that needs to be set
> high so that the vibrator works. Add support for that optionally.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>

Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
> ---
>   drivers/input/misc/pwm-vibra.c | 16 ++++++++++++++++
>   1 file changed, 16 insertions(+)
> 
> diff --git a/drivers/input/misc/pwm-vibra.c b/drivers/input/misc/pwm-vibra.c
> index c08971c97ad6..2ba035299db8 100644
> --- a/drivers/input/misc/pwm-vibra.c
> +++ b/drivers/input/misc/pwm-vibra.c
> @@ -11,6 +11,7 @@
>    *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
>    */
>   
> +#include <linux/gpio/consumer.h>
>   #include <linux/input.h>
>   #include <linux/kernel.h>
>   #include <linux/module.h>
> @@ -23,6 +24,7 @@
>   
>   struct pwm_vibrator {
>   	struct input_dev *input;
> +	struct gpio_desc *enable_gpio;
>   	struct pwm_device *pwm;
>   	struct pwm_device *pwm_dir;
>   	struct regulator *vcc;
> @@ -48,6 +50,8 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
>   		vibrator->vcc_on = true;
>   	}
>   
> +	gpiod_set_value_cansleep(vibrator->enable_gpio, 1);
> +
>   	pwm_get_state(vibrator->pwm, &state);
>   	pwm_set_relative_duty_cycle(&state, vibrator->level, 0xffff);
>   	state.enabled = true;
> @@ -80,6 +84,8 @@ static void pwm_vibrator_stop(struct pwm_vibrator *vibrator)
>   		pwm_disable(vibrator->pwm_dir);
>   	pwm_disable(vibrator->pwm);
>   
> +	gpiod_set_value_cansleep(vibrator->enable_gpio, 0);
> +
>   	if (vibrator->vcc_on) {
>   		regulator_disable(vibrator->vcc);
>   		vibrator->vcc_on = false;
> @@ -142,6 +148,16 @@ static int pwm_vibrator_probe(struct platform_device *pdev)
>   		return err;
>   	}
>   
> +	vibrator->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable",
> +							GPIOD_OUT_LOW);
> +	err = PTR_ERR_OR_ZERO(vibrator->enable_gpio);
> +	if (err) {
> +		if (err != -EPROBE_DEFER)
> +			dev_err(&pdev->dev, "Failed to request enable gpio: %d\n",
> +				err);
> +		return err;
> +	}
> +
>   	vibrator->pwm = devm_pwm_get(&pdev->dev, "enable");
>   	err = PTR_ERR_OR_ZERO(vibrator->pwm);
>   	if (err) {
>
Luca Weiss April 28, 2023, 4:06 p.m. UTC | #3
On Freitag, 28. April 2023 01:29:27 CEST Brian Masney wrote:
> On Thu, Apr 27, 2023 at 10:34:28PM +0200, Luca Weiss wrote:
> > Some pwm vibrators have a dedicated enable GPIO that needs to be set
> > high so that the vibrator works. Add support for that optionally.
> > 
> > Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> 
> Hi Luca,
> 
> Thank you for picking up this work!
> 
> > +	vibrator->enable_gpio = devm_gpiod_get_optional(&pdev->dev, 
"enable",
> > +							
GPIOD_OUT_LOW);
> > +	err = PTR_ERR_OR_ZERO(vibrator->enable_gpio);
> > +	if (err) {
> > +		if (err != -EPROBE_DEFER)
> > +			dev_err(&pdev->dev, "Failed to request enable 
gpio: %d\n",
> > +				err);
> > +		return err;
> > +	}
> > +
> 
> Take a look at dev_err_probe() to remove the -EPROBE_DEFER check.

The input subsystem doesn't like dev_err_probe for some reason, you should 
quickly find examples of that being rejected on the mailing list (or see   
"git grep dev_err_probe drivers/input/")

> 
> With that fixed:
> 
> Reviewed-by: Brian Masney <bmasney@redhat.com>

Thanks for the reviews!
Brian Masney April 28, 2023, 4:11 p.m. UTC | #4
On Fri, Apr 28, 2023 at 06:06:20PM +0200, Luca Weiss wrote:
> On Freitag, 28. April 2023 01:29:27 CEST Brian Masney wrote:
> > Take a look at dev_err_probe() to remove the -EPROBE_DEFER check.
> 
> The input subsystem doesn't like dev_err_probe for some reason, you should 
> quickly find examples of that being rejected on the mailing list (or see   
> "git grep dev_err_probe drivers/input/")

OK, that's fine then. Feel free to include my Reviewed-by.

Brian
Sebastian Reichel April 29, 2023, 7:47 p.m. UTC | #5
Hi,

On Thu, Apr 27, 2023 at 10:34:28PM +0200, Luca Weiss wrote:
> Some pwm vibrators have a dedicated enable GPIO that needs to be set
> high so that the vibrator works. Add support for that optionally.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---

Reviewed-by: Sebastian Reichel <sre@kernel.org>

-- Sebastian

>  drivers/input/misc/pwm-vibra.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/drivers/input/misc/pwm-vibra.c b/drivers/input/misc/pwm-vibra.c
> index c08971c97ad6..2ba035299db8 100644
> --- a/drivers/input/misc/pwm-vibra.c
> +++ b/drivers/input/misc/pwm-vibra.c
> @@ -11,6 +11,7 @@
>   *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
>   */
>  
> +#include <linux/gpio/consumer.h>
>  #include <linux/input.h>
>  #include <linux/kernel.h>
>  #include <linux/module.h>
> @@ -23,6 +24,7 @@
>  
>  struct pwm_vibrator {
>  	struct input_dev *input;
> +	struct gpio_desc *enable_gpio;
>  	struct pwm_device *pwm;
>  	struct pwm_device *pwm_dir;
>  	struct regulator *vcc;
> @@ -48,6 +50,8 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
>  		vibrator->vcc_on = true;
>  	}
>  
> +	gpiod_set_value_cansleep(vibrator->enable_gpio, 1);
> +
>  	pwm_get_state(vibrator->pwm, &state);
>  	pwm_set_relative_duty_cycle(&state, vibrator->level, 0xffff);
>  	state.enabled = true;
> @@ -80,6 +84,8 @@ static void pwm_vibrator_stop(struct pwm_vibrator *vibrator)
>  		pwm_disable(vibrator->pwm_dir);
>  	pwm_disable(vibrator->pwm);
>  
> +	gpiod_set_value_cansleep(vibrator->enable_gpio, 0);
> +
>  	if (vibrator->vcc_on) {
>  		regulator_disable(vibrator->vcc);
>  		vibrator->vcc_on = false;
> @@ -142,6 +148,16 @@ static int pwm_vibrator_probe(struct platform_device *pdev)
>  		return err;
>  	}
>  
> +	vibrator->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable",
> +							GPIOD_OUT_LOW);
> +	err = PTR_ERR_OR_ZERO(vibrator->enable_gpio);
> +	if (err) {
> +		if (err != -EPROBE_DEFER)
> +			dev_err(&pdev->dev, "Failed to request enable gpio: %d\n",
> +				err);
> +		return err;
> +	}
> +
>  	vibrator->pwm = devm_pwm_get(&pdev->dev, "enable");
>  	err = PTR_ERR_OR_ZERO(vibrator->pwm);
>  	if (err) {
> 
> -- 
> 2.40.0
>
Konrad Dybcio May 2, 2023, 10:39 a.m. UTC | #6
On 28.04.2023 18:06, Luca Weiss wrote:
> On Freitag, 28. April 2023 01:29:27 CEST Brian Masney wrote:
>> On Thu, Apr 27, 2023 at 10:34:28PM +0200, Luca Weiss wrote:
>>> Some pwm vibrators have a dedicated enable GPIO that needs to be set
>>> high so that the vibrator works. Add support for that optionally.
>>>
>>> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
>>
>> Hi Luca,
>>
>> Thank you for picking up this work!
>>
>>> +	vibrator->enable_gpio = devm_gpiod_get_optional(&pdev->dev, 
> "enable",
>>> +							
> GPIOD_OUT_LOW);
>>> +	err = PTR_ERR_OR_ZERO(vibrator->enable_gpio);
>>> +	if (err) {
>>> +		if (err != -EPROBE_DEFER)
>>> +			dev_err(&pdev->dev, "Failed to request enable 
> gpio: %d\n",
>>> +				err);
>>> +		return err;
>>> +	}
>>> +
>>
Looks like your email client messes with the replies.. perhaps it tries
to round them to n characters forcefully?

Konrad
>> Take a look at dev_err_probe() to remove the -EPROBE_DEFER check.
> 
> The input subsystem doesn't like dev_err_probe for some reason, you should 
> quickly find examples of that being rejected on the mailing list (or see   
> "git grep dev_err_probe drivers/input/")
> 
>>
>> With that fixed:
>>
>> Reviewed-by: Brian Masney <bmasney@redhat.com>
> 
> Thanks for the reviews!
> 
>
Luca Weiss May 2, 2023, 3:24 p.m. UTC | #7
On Dienstag, 2. Mai 2023 12:39:10 CEST Konrad Dybcio wrote:
> On 28.04.2023 18:06, Luca Weiss wrote:
> > On Freitag, 28. April 2023 01:29:27 CEST Brian Masney wrote:
> >> On Thu, Apr 27, 2023 at 10:34:28PM +0200, Luca Weiss wrote:
> >>> Some pwm vibrators have a dedicated enable GPIO that needs to be set
> >>> high so that the vibrator works. Add support for that optionally.
> >>> 
> >>> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> >> 
> >> Hi Luca,
> >> 
> >> Thank you for picking up this work!
> >> 
> >>> +	vibrator->enable_gpio = devm_gpiod_get_optional(&pdev->dev,
> > 
> > "enable",
> > 
> >>> +
> > 
> > GPIOD_OUT_LOW);
> > 
> >>> +	err = PTR_ERR_OR_ZERO(vibrator->enable_gpio);
> >>> +	if (err) {
> >>> +		if (err != -EPROBE_DEFER)
> >>> +			dev_err(&pdev->dev, "Failed to request enable
> > 
> > gpio: %d\n",
> > 
> >>> +				err);
> >>> +		return err;
> >>> +	}
> >>> +
> 
> Looks like your email client messes with the replies.. perhaps it tries
> to round them to n characters forcefully?

Quite possible, I'm using KMail with Options -> Wordwrap turned on, otherwise 
I have to manually wrap everything but with this on there doesn't seem to be a 
way to get over that limit, even when posting links etc - or when quoting 
existing text.

Regards
Luca

> 
> Konrad
> 
> >> Take a look at dev_err_probe() to remove the -EPROBE_DEFER check.
> > 
> > The input subsystem doesn't like dev_err_probe for some reason, you should
> > quickly find examples of that being rejected on the mailing list (or see
> > "git grep dev_err_probe drivers/input/")
> > 
> >> With that fixed:
> >> 
> >> Reviewed-by: Brian Masney <bmasney@redhat.com>
> > 
> > Thanks for the reviews!
diff mbox series

Patch

diff --git a/drivers/input/misc/pwm-vibra.c b/drivers/input/misc/pwm-vibra.c
index c08971c97ad6..2ba035299db8 100644
--- a/drivers/input/misc/pwm-vibra.c
+++ b/drivers/input/misc/pwm-vibra.c
@@ -11,6 +11,7 @@ 
  *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
  */
 
+#include <linux/gpio/consumer.h>
 #include <linux/input.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -23,6 +24,7 @@ 
 
 struct pwm_vibrator {
 	struct input_dev *input;
+	struct gpio_desc *enable_gpio;
 	struct pwm_device *pwm;
 	struct pwm_device *pwm_dir;
 	struct regulator *vcc;
@@ -48,6 +50,8 @@  static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
 		vibrator->vcc_on = true;
 	}
 
+	gpiod_set_value_cansleep(vibrator->enable_gpio, 1);
+
 	pwm_get_state(vibrator->pwm, &state);
 	pwm_set_relative_duty_cycle(&state, vibrator->level, 0xffff);
 	state.enabled = true;
@@ -80,6 +84,8 @@  static void pwm_vibrator_stop(struct pwm_vibrator *vibrator)
 		pwm_disable(vibrator->pwm_dir);
 	pwm_disable(vibrator->pwm);
 
+	gpiod_set_value_cansleep(vibrator->enable_gpio, 0);
+
 	if (vibrator->vcc_on) {
 		regulator_disable(vibrator->vcc);
 		vibrator->vcc_on = false;
@@ -142,6 +148,16 @@  static int pwm_vibrator_probe(struct platform_device *pdev)
 		return err;
 	}
 
+	vibrator->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable",
+							GPIOD_OUT_LOW);
+	err = PTR_ERR_OR_ZERO(vibrator->enable_gpio);
+	if (err) {
+		if (err != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to request enable gpio: %d\n",
+				err);
+		return err;
+	}
+
 	vibrator->pwm = devm_pwm_get(&pdev->dev, "enable");
 	err = PTR_ERR_OR_ZERO(vibrator->pwm);
 	if (err) {