@@ -193,44 +193,6 @@ struct drv260x_data {
int overdrive_voltage;
};
-static const struct reg_default drv260x_reg_defs[] = {
- { DRV260X_STATUS, 0xe0 },
- { DRV260X_MODE, 0x40 },
- { DRV260X_RT_PB_IN, 0x00 },
- { DRV260X_LIB_SEL, 0x00 },
- { DRV260X_WV_SEQ_1, 0x01 },
- { DRV260X_WV_SEQ_2, 0x00 },
- { DRV260X_WV_SEQ_3, 0x00 },
- { DRV260X_WV_SEQ_4, 0x00 },
- { DRV260X_WV_SEQ_5, 0x00 },
- { DRV260X_WV_SEQ_6, 0x00 },
- { DRV260X_WV_SEQ_7, 0x00 },
- { DRV260X_WV_SEQ_8, 0x00 },
- { DRV260X_GO, 0x00 },
- { DRV260X_OVERDRIVE_OFF, 0x00 },
- { DRV260X_SUSTAIN_P_OFF, 0x00 },
- { DRV260X_SUSTAIN_N_OFF, 0x00 },
- { DRV260X_BRAKE_OFF, 0x00 },
- { DRV260X_A_TO_V_CTRL, 0x05 },
- { DRV260X_A_TO_V_MIN_INPUT, 0x19 },
- { DRV260X_A_TO_V_MAX_INPUT, 0xff },
- { DRV260X_A_TO_V_MIN_OUT, 0x19 },
- { DRV260X_A_TO_V_MAX_OUT, 0xff },
- { DRV260X_RATED_VOLT, 0x3e },
- { DRV260X_OD_CLAMP_VOLT, 0x8c },
- { DRV260X_CAL_COMP, 0x0c },
- { DRV260X_CAL_BACK_EMF, 0x6c },
- { DRV260X_FEEDBACK_CTRL, 0x36 },
- { DRV260X_CTRL1, 0x93 },
- { DRV260X_CTRL2, 0xfa },
- { DRV260X_CTRL3, 0xa0 },
- { DRV260X_CTRL4, 0x20 },
- { DRV260X_CTRL5, 0x80 },
- { DRV260X_LRA_LOOP_PERIOD, 0x33 },
- { DRV260X_VBAT_MON, 0x00 },
- { DRV260X_LRA_RES_PERIOD, 0x00 },
-};
-
#define DRV260X_DEF_RATED_VOLT 0x90
#define DRV260X_DEF_OD_CLAMP_VOLT 0x90
@@ -453,8 +415,6 @@ static const struct regmap_config drv260x_regmap_config = {
.val_bits = 8,
.max_register = DRV260X_MAX_REG,
- .reg_defaults = drv260x_reg_defs,
- .num_reg_defaults = ARRAY_SIZE(drv260x_reg_defs),
.cache_type = REGCACHE_NONE,
};
Since the driver has disabled regmap caching with REGCACHE_NONE, it's warning us that we provide defaults that are not used. Remove them. [ 0.561159] drv260x-haptics 0-005a: No cache used with register defaults set! Fixes: 7132fe4f5687 ("Input: drv260x - add TI drv260x haptics driver") Signed-off-by: Luca Weiss <luca@z3ntu.xyz> --- drivers/input/misc/drv260x.c | 40 ---------------------------------------- 1 file changed, 40 deletions(-)