diff mbox series

ARM: dts: imx6ull-dhcor: Set and limit the mode for PMIC buck 1, 2 and 3

Message ID 20230502111424.3114-1-cniedermaier@dh-electronics.com
State Accepted
Commit 892943d7729bbfb2edeed9e323eba9a5cec21c49
Headers show
Series ARM: dts: imx6ull-dhcor: Set and limit the mode for PMIC buck 1, 2 and 3 | expand

Commit Message

Christoph Niedermaier May 2, 2023, 11:14 a.m. UTC 
According to Renesas Electronics (formerly Dialog Semiconductor), the
standard AUTO mode of the PMIC DA9061 can lead to stability problems
depending on the hardware revision. It is recommended to set a defined
mode such as PFM or PWM permanently. So set and limit the mode for
buck 1, 2 and 3 to a fixed one.

Fixes: 611b6c891e40 ("ARM: dts: imx6ull-dhcom: Add DH electronics DHCOM i.MX6ULL SoM and PDK2 board")

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
---
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Li Yang <leoyang.li@nxp.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
To: linux-arm-kernel@lists.infradead.org
---
 arch/arm/boot/dts/imx6ull-dhcor-som.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi b/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi
index 5882c7565f64..32a6022625d9 100644
--- a/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi
+++ b/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi
@@ -8,6 +8,7 @@ 
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/regulator/dlg,da9063-regulator.h>
 #include "imx6ull.dtsi"
 
 / {
@@ -84,16 +85,20 @@ 
 
 		regulators {
 			vdd_soc_in_1v4: buck1 {
+				regulator-allowed-modes = <DA9063_BUCK_MODE_SLEEP>; /* PFM */
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SLEEP>;
 				regulator-max-microvolt = <1400000>;
 				regulator-min-microvolt = <1400000>;
 				regulator-name = "vdd_soc_in_1v4";
 			};
 
 			vcc_3v3: buck2 {
+				regulator-allowed-modes = <DA9063_BUCK_MODE_SYNC>; /* PWM */
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
 				regulator-max-microvolt = <3300000>;
 				regulator-min-microvolt = <3300000>;
 				regulator-name = "vcc_3v3";
@@ -106,8 +111,10 @@ 
 			 * the voltage is set to 1.5V.
 			 */
 			vcc_ddr_1v35: buck3 {
+				regulator-allowed-modes = <DA9063_BUCK_MODE_SYNC>; /* PWM */
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
 				regulator-max-microvolt = <1500000>;
 				regulator-min-microvolt = <1500000>;
 				regulator-name = "vcc_ddr_1v35";