diff mbox series

[v8,05/14] mfd: rk808: split into core and i2c

Message ID 20230504173618.142075-6-sebastian.reichel@collabora.com
State Accepted
Commit c20e8c5b1203af3726561ee5649b147194e0618e
Headers show
Series None | expand

Commit Message

Sebastian Reichel May 4, 2023, 5:36 p.m. UTC
Split rk808 into a core and an i2c part in preparation for
SPI support.

Acked-for-MFD-by: Lee Jones <lee@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> # for RTC
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/clk/Kconfig                   |   2 +-
 drivers/input/misc/Kconfig            |   2 +-
 drivers/mfd/Kconfig                   |   7 +-
 drivers/mfd/Makefile                  |   3 +-
 drivers/mfd/{rk808.c => rk8xx-core.c} | 209 +++++---------------------
 drivers/mfd/rk8xx-i2c.c               | 200 ++++++++++++++++++++++++
 drivers/pinctrl/Kconfig               |   2 +-
 drivers/power/supply/Kconfig          |   2 +-
 drivers/regulator/Kconfig             |   2 +-
 drivers/rtc/Kconfig                   |   2 +-
 include/linux/mfd/rk808.h             |   6 +
 sound/soc/codecs/Kconfig              |   2 +-
 12 files changed, 256 insertions(+), 183 deletions(-)
 rename drivers/mfd/{rk808.c => rk8xx-core.c} (76%)
 create mode 100644 drivers/mfd/rk8xx-i2c.c

Comments

Lee Jones May 15, 2023, 3:19 p.m. UTC | #1
On Thu, 04 May 2023, Sebastian Reichel wrote:

> Split rk808 into a core and an i2c part in preparation for
> SPI support.
> 
> Acked-for-MFD-by: Lee Jones <lee@kernel.org>
> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> # for RTC
> Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
> Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
>  drivers/clk/Kconfig                   |   2 +-
>  drivers/input/misc/Kconfig            |   2 +-
>  drivers/mfd/Kconfig                   |   7 +-
>  drivers/mfd/Makefile                  |   3 +-
>  drivers/mfd/{rk808.c => rk8xx-core.c} | 209 +++++---------------------
>  drivers/mfd/rk8xx-i2c.c               | 200 ++++++++++++++++++++++++
>  drivers/pinctrl/Kconfig               |   2 +-
>  drivers/power/supply/Kconfig          |   2 +-
>  drivers/regulator/Kconfig             |   2 +-
>  drivers/rtc/Kconfig                   |   2 +-
>  include/linux/mfd/rk808.h             |   6 +
>  sound/soc/codecs/Kconfig              |   2 +-
>  12 files changed, 256 insertions(+), 183 deletions(-)
>  rename drivers/mfd/{rk808.c => rk8xx-core.c} (76%)
>  create mode 100644 drivers/mfd/rk8xx-i2c.c

Applied, thanks
Marek Szyprowski May 16, 2023, 9:26 p.m. UTC | #2
Hi,

On 04.05.2023 19:36, Sebastian Reichel wrote:
> Split rk808 into a core and an i2c part in preparation for
> SPI support.
>
> Acked-for-MFD-by: Lee Jones <lee@kernel.org>
> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> # for RTC
> Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
> Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

This patch landed in today's linux-next as commit c20e8c5b1203 ("mfd: 
rk808: Split into core and i2c"). Unfortunately some boards (for example 
Hardkernel's Odroid-M1) stopped to boot after this change. This is 
caused by the lack of updating the related defconfigs. Could you please 
add a patch that updates the MFD_RK808 entries to MFD_RK8XX_I2C in the 
following files:

$ git grep MFD_RK808
arch/arm/configs/multi_v7_defconfig:CONFIG_MFD_RK808=y
arch/arm64/configs/defconfig:CONFIG_MFD_RK808=y


> ---
>   drivers/clk/Kconfig                   |   2 +-
>   drivers/input/misc/Kconfig            |   2 +-
>   drivers/mfd/Kconfig                   |   7 +-
>   drivers/mfd/Makefile                  |   3 +-
>   drivers/mfd/{rk808.c => rk8xx-core.c} | 209 +++++---------------------
>   drivers/mfd/rk8xx-i2c.c               | 200 ++++++++++++++++++++++++
>   drivers/pinctrl/Kconfig               |   2 +-
>   drivers/power/supply/Kconfig          |   2 +-
>   drivers/regulator/Kconfig             |   2 +-
>   drivers/rtc/Kconfig                   |   2 +-
>   include/linux/mfd/rk808.h             |   6 +
>   sound/soc/codecs/Kconfig              |   2 +-
>   12 files changed, 256 insertions(+), 183 deletions(-)
>   rename drivers/mfd/{rk808.c => rk8xx-core.c} (76%)
>   create mode 100644 drivers/mfd/rk8xx-i2c.c
>
> ...

Best regards
Sebastian Reichel May 16, 2023, 10:01 p.m. UTC | #3
Hello Marek,

On Tue, May 16, 2023 at 11:26:59PM +0200, Marek Szyprowski wrote:
> Hi,
> 
> On 04.05.2023 19:36, Sebastian Reichel wrote:
> > Split rk808 into a core and an i2c part in preparation for
> > SPI support.
> >
> > Acked-for-MFD-by: Lee Jones <lee@kernel.org>
> > Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> # for RTC
> > Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
> > Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
> > Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> 
> This patch landed in today's linux-next as commit c20e8c5b1203 ("mfd: 
> rk808: Split into core and i2c"). Unfortunately some boards (for example 
> Hardkernel's Odroid-M1) stopped to boot after this change. This is 
> caused by the lack of updating the related defconfigs. Could you please 
> add a patch that updates the MFD_RK808 entries to MFD_RK8XX_I2C in the 
> following files:
> 
> $ git grep MFD_RK808
> arch/arm/configs/multi_v7_defconfig:CONFIG_MFD_RK808=y
> arch/arm64/configs/defconfig:CONFIG_MFD_RK808=y

Sure, I will prepare a patch for each of them. Thanks for the quick
report and sorry for the inconvenience.

-- Sebastian

> 
> 
> > ---
> >   drivers/clk/Kconfig                   |   2 +-
> >   drivers/input/misc/Kconfig            |   2 +-
> >   drivers/mfd/Kconfig                   |   7 +-
> >   drivers/mfd/Makefile                  |   3 +-
> >   drivers/mfd/{rk808.c => rk8xx-core.c} | 209 +++++---------------------
> >   drivers/mfd/rk8xx-i2c.c               | 200 ++++++++++++++++++++++++
> >   drivers/pinctrl/Kconfig               |   2 +-
> >   drivers/power/supply/Kconfig          |   2 +-
> >   drivers/regulator/Kconfig             |   2 +-
> >   drivers/rtc/Kconfig                   |   2 +-
> >   include/linux/mfd/rk808.h             |   6 +
> >   sound/soc/codecs/Kconfig              |   2 +-
> >   12 files changed, 256 insertions(+), 183 deletions(-)
> >   rename drivers/mfd/{rk808.c => rk8xx-core.c} (76%)
> >   create mode 100644 drivers/mfd/rk8xx-i2c.c
> >
> > ...
> 
> Best regards
> -- 
> Marek Szyprowski, PhD
> Samsung R&D Institute Poland
>
Geert Uytterhoeven June 30, 2023, 11:34 a.m. UTC | #4
Hi Sebastian,

On Thu, May 4, 2023 at 7:38 PM Sebastian Reichel
<sebastian.reichel@collabora.com> wrote:
> Split rk808 into a core and an i2c part in preparation for
> SPI support.
>
> Acked-for-MFD-by: Lee Jones <lee@kernel.org>
> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> # for RTC
> Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
> Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Thanks for your patch, which is now commit c20e8c5b1203af37 ("mfd:
rk808: Split into core and i2c") in linus/master stable/master

> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1183,12 +1183,17 @@ config MFD_RC5T583
>           Additional drivers must be enabled in order to use the
>           different functionality of the device.
>
> -config MFD_RK808
> +config MFD_RK8XX
> +       bool

Is there any specific reason why this cannot be modular, like most (all?)
of its users that select it?

> +       select MFD_CORE
> +
> +config MFD_RK8XX_I2C
>         tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power Management Chip"
>         depends on I2C && OF
>         select MFD_CORE
>         select REGMAP_I2C
>         select REGMAP_IRQ
> +       select MFD_RK8XX
>         help
>           If you say yes here you get support for the RK805, RK808, RK809,
>           RK817 and RK818 Power Management chips.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Geert Uytterhoeven July 4, 2023, 1:08 p.m. UTC | #5
Hi Sebastian,

On Fri, Jun 30, 2023 at 8:48 PM Sebastian Reichel
<sebastian.reichel@collabora.com> wrote:
> On Fri, Jun 30, 2023 at 01:34:44PM +0200, Geert Uytterhoeven wrote:
> > > --- a/drivers/mfd/Kconfig
> > > +++ b/drivers/mfd/Kconfig
> > > @@ -1183,12 +1183,17 @@ config MFD_RC5T583
> > >           Additional drivers must be enabled in order to use the
> > >           different functionality of the device.
> > >
> > > -config MFD_RK808
> > > +config MFD_RK8XX
> > > +       bool
> >
> > Is there any specific reason why this cannot be modular, like most (all?)
> > of its users that select it?
>
> I don't remember why I made that bool. Tristate should be perfectly
> fine. Do you want to send a patch (I will test it of course), or should
> I take care of it?

I have sent a patch.
https://lore.kernel.org/r/d132363fc9228473e9e652b70a3761b94de32d70.1688475844.git.geert+renesas@glider.be

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 016814e15536..c0c8e526a1e9 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -82,7 +82,7 @@  config COMMON_CLK_MAX9485
 
 config COMMON_CLK_RK808
 	tristate "Clock driver for RK805/RK808/RK809/RK817/RK818"
-	depends on MFD_RK808
+	depends on MFD_RK8XX
 	help
 	  This driver supports RK805, RK809 and RK817, RK808 and RK818 crystal oscillator clock.
 	  These multi-function devices have two fixed-rate oscillators, clocked at 32KHz each.
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 81a54a59e13c..8a320e6218e3 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -609,7 +609,7 @@  config INPUT_PWM_VIBRA
 
 config INPUT_RK805_PWRKEY
 	tristate "Rockchip RK805 PMIC power key support"
-	depends on MFD_RK808
+	depends on MFD_RK8XX
 	help
 	  Select this option to enable power key driver for RK805.
 
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index e90463c4441c..de53e6c701fd 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1183,12 +1183,17 @@  config MFD_RC5T583
 	  Additional drivers must be enabled in order to use the
 	  different functionality of the device.
 
-config MFD_RK808
+config MFD_RK8XX
+	bool
+	select MFD_CORE
+
+config MFD_RK8XX_I2C
 	tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power Management Chip"
 	depends on I2C && OF
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
+	select MFD_RK8XX
 	help
 	  If you say yes here you get support for the RK805, RK808, RK809,
 	  RK817 and RK818 Power Management chips.
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 1d2392f06f78..ba373193e999 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -214,7 +214,8 @@  obj-$(CONFIG_MFD_PALMAS)	+= palmas.o
 obj-$(CONFIG_MFD_VIPERBOARD)    += viperboard.o
 obj-$(CONFIG_MFD_NTXEC)		+= ntxec.o
 obj-$(CONFIG_MFD_RC5T583)	+= rc5t583.o rc5t583-irq.o
-obj-$(CONFIG_MFD_RK808)		+= rk808.o
+obj-$(CONFIG_MFD_RK8XX)		+= rk8xx-core.o
+obj-$(CONFIG_MFD_RK8XX_I2C)	+= rk8xx-i2c.o
 obj-$(CONFIG_MFD_RN5T618)	+= rn5t618.o
 obj-$(CONFIG_MFD_SEC_CORE)	+= sec-core.o sec-irq.o
 obj-$(CONFIG_MFD_SYSCON)	+= syscon.o
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk8xx-core.c
similarity index 76%
rename from drivers/mfd/rk808.c
rename to drivers/mfd/rk8xx-core.c
index ce52307cbaea..5c0a5acef34c 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk8xx-core.c
@@ -1,18 +1,15 @@ 
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * MFD core driver for Rockchip RK808/RK818
+ * MFD core driver for Rockchip RK8XX
  *
  * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
  *
  * Author: Chris Zhong <zyw@rock-chips.com>
  * Author: Zhang Qing <zhangqing@rock-chips.com>
- *
- * Copyright (C) 2016 PHYTEC Messtechnik GmbH
- *
  * Author: Wadim Egorov <w.egorov@phytec.de>
  */
 
-#include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/mfd/rk808.h>
 #include <linux/mfd/core.h>
@@ -27,92 +24,6 @@  struct rk808_reg_data {
 	int value;
 };
 
-static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
-{
-	/*
-	 * Notes:
-	 * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but
-	 *   we don't use that feature.  It's better to cache.
-	 * - It's unlikely we care that RK808_DEVCTRL_REG is volatile since
-	 *   bits are cleared in case when we shutoff anyway, but better safe.
-	 */
-
-	switch (reg) {
-	case RK808_SECONDS_REG ... RK808_WEEKS_REG:
-	case RK808_RTC_STATUS_REG:
-	case RK808_VB_MON_REG:
-	case RK808_THERMAL_REG:
-	case RK808_DCDC_UV_STS_REG:
-	case RK808_LDO_UV_STS_REG:
-	case RK808_DCDC_PG_REG:
-	case RK808_LDO_PG_REG:
-	case RK808_DEVCTRL_REG:
-	case RK808_INT_STS_REG1:
-	case RK808_INT_STS_REG2:
-		return true;
-	}
-
-	return false;
-}
-
-static bool rk817_is_volatile_reg(struct device *dev, unsigned int reg)
-{
-	/*
-	 * Notes:
-	 * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but
-	 *   we don't use that feature.  It's better to cache.
-	 */
-
-	switch (reg) {
-	case RK817_SECONDS_REG ... RK817_WEEKS_REG:
-	case RK817_RTC_STATUS_REG:
-	case RK817_CODEC_DTOP_LPT_SRST:
-	case RK817_GAS_GAUGE_ADC_CONFIG0 ... RK817_GAS_GAUGE_CUR_ADC_K0:
-	case RK817_PMIC_CHRG_STS:
-	case RK817_PMIC_CHRG_OUT:
-	case RK817_PMIC_CHRG_IN:
-	case RK817_INT_STS_REG0:
-	case RK817_INT_STS_REG1:
-	case RK817_INT_STS_REG2:
-	case RK817_SYS_STS:
-		return true;
-	}
-
-	return false;
-}
-
-static const struct regmap_config rk818_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-	.max_register = RK818_USB_CTRL_REG,
-	.cache_type = REGCACHE_RBTREE,
-	.volatile_reg = rk808_is_volatile_reg,
-};
-
-static const struct regmap_config rk805_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-	.max_register = RK805_OFF_SOURCE_REG,
-	.cache_type = REGCACHE_RBTREE,
-	.volatile_reg = rk808_is_volatile_reg,
-};
-
-static const struct regmap_config rk808_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-	.max_register = RK808_IO_POL_REG,
-	.cache_type = REGCACHE_RBTREE,
-	.volatile_reg = rk808_is_volatile_reg,
-};
-
-static const struct regmap_config rk817_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-	.max_register = RK817_GPIO_INT_CFG,
-	.cache_type = REGCACHE_NONE,
-	.volatile_reg = rk817_is_volatile_reg,
-};
-
 static const struct resource rtc_resources[] = {
 	DEFINE_RES_IRQ(RK808_IRQ_RTC_ALARM),
 };
@@ -605,9 +516,9 @@  static int rk808_restart(struct sys_off_data *data)
 	return NOTIFY_DONE;
 }
 
-static void rk8xx_shutdown(struct i2c_client *client)
+void rk8xx_shutdown(struct device *dev)
 {
-	struct rk808 *rk808 = i2c_get_clientdata(client);
+	struct rk808 *rk808 = dev_get_drvdata(dev);
 	int ret;
 
 	switch (rk808->variant) {
@@ -628,61 +539,31 @@  static void rk8xx_shutdown(struct i2c_client *client)
 		return;
 	}
 	if (ret)
-		dev_warn(&client->dev,
+		dev_warn(dev,
 			 "Cannot switch to power down function\n");
 }
+EXPORT_SYMBOL_GPL(rk8xx_shutdown);
 
-static const struct of_device_id rk808_of_match[] = {
-	{ .compatible = "rockchip,rk805" },
-	{ .compatible = "rockchip,rk808" },
-	{ .compatible = "rockchip,rk809" },
-	{ .compatible = "rockchip,rk817" },
-	{ .compatible = "rockchip,rk818" },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, rk808_of_match);
-
-static int rk808_probe(struct i2c_client *client)
+int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap *regmap)
 {
-	struct device_node *np = client->dev.of_node;
 	struct rk808 *rk808;
 	const struct rk808_reg_data *pre_init_reg;
 	const struct mfd_cell *cells;
 	int nr_pre_init_regs;
 	int nr_cells;
-	int msb, lsb;
-	unsigned char pmic_id_msb, pmic_id_lsb;
 	int ret;
 	int i;
 
-	rk808 = devm_kzalloc(&client->dev, sizeof(*rk808), GFP_KERNEL);
+	rk808 = devm_kzalloc(dev, sizeof(*rk808), GFP_KERNEL);
 	if (!rk808)
 		return -ENOMEM;
-
-	if (of_device_is_compatible(np, "rockchip,rk817") ||
-	    of_device_is_compatible(np, "rockchip,rk809")) {
-		pmic_id_msb = RK817_ID_MSB;
-		pmic_id_lsb = RK817_ID_LSB;
-	} else {
-		pmic_id_msb = RK808_ID_MSB;
-		pmic_id_lsb = RK808_ID_LSB;
-	}
-
-	/* Read chip variant */
-	msb = i2c_smbus_read_byte_data(client, pmic_id_msb);
-	if (msb < 0)
-		return dev_err_probe(&client->dev, msb, "failed to read the chip id MSB\n");
-
-	lsb = i2c_smbus_read_byte_data(client, pmic_id_lsb);
-	if (lsb < 0)
-		return dev_err_probe(&client->dev, lsb, "failed to read the chip id LSB\n");
-
-	rk808->variant = ((msb << 8) | lsb) & RK8XX_ID_MSK;
-	dev_info(&client->dev, "chip id: 0x%x\n", (unsigned int)rk808->variant);
+	rk808->dev = dev;
+	rk808->variant = variant;
+	rk808->regmap = regmap;
+	dev_set_drvdata(dev, rk808);
 
 	switch (rk808->variant) {
 	case RK805_ID:
-		rk808->regmap_cfg = &rk805_regmap_config;
 		rk808->regmap_irq_chip = &rk805_irq_chip;
 		pre_init_reg = rk805_pre_init_reg;
 		nr_pre_init_regs = ARRAY_SIZE(rk805_pre_init_reg);
@@ -690,7 +571,6 @@  static int rk808_probe(struct i2c_client *client)
 		nr_cells = ARRAY_SIZE(rk805s);
 		break;
 	case RK808_ID:
-		rk808->regmap_cfg = &rk808_regmap_config;
 		rk808->regmap_irq_chip = &rk808_irq_chip;
 		pre_init_reg = rk808_pre_init_reg;
 		nr_pre_init_regs = ARRAY_SIZE(rk808_pre_init_reg);
@@ -698,7 +578,6 @@  static int rk808_probe(struct i2c_client *client)
 		nr_cells = ARRAY_SIZE(rk808s);
 		break;
 	case RK818_ID:
-		rk808->regmap_cfg = &rk818_regmap_config;
 		rk808->regmap_irq_chip = &rk818_irq_chip;
 		pre_init_reg = rk818_pre_init_reg;
 		nr_pre_init_regs = ARRAY_SIZE(rk818_pre_init_reg);
@@ -707,7 +586,6 @@  static int rk808_probe(struct i2c_client *client)
 		break;
 	case RK809_ID:
 	case RK817_ID:
-		rk808->regmap_cfg = &rk817_regmap_config;
 		rk808->regmap_irq_chip = &rk817_irq_chip;
 		pre_init_reg = rk817_pre_init_reg;
 		nr_pre_init_regs = ARRAY_SIZE(rk817_pre_init_reg);
@@ -715,27 +593,20 @@  static int rk808_probe(struct i2c_client *client)
 		nr_cells = ARRAY_SIZE(rk817s);
 		break;
 	default:
-		dev_err(&client->dev, "Unsupported RK8XX ID %lu\n",
-			rk808->variant);
+		dev_err(dev, "Unsupported RK8XX ID %lu\n", rk808->variant);
 		return -EINVAL;
 	}
 
-	rk808->dev = &client->dev;
-	i2c_set_clientdata(client, rk808);
-
-	rk808->regmap = devm_regmap_init_i2c(client, rk808->regmap_cfg);
-	if (IS_ERR(rk808->regmap))
-		return dev_err_probe(&client->dev, PTR_ERR(rk808->regmap),
-				     "regmap initialization failed\n");
+	dev_info(dev, "chip id: 0x%x\n", (unsigned int)rk808->variant);
 
-	if (!client->irq)
-		return dev_err_probe(&client->dev, -EINVAL, "No interrupt support, no core IRQ\n");
+	if (!irq)
+		return dev_err_probe(dev, -EINVAL, "No interrupt support, no core IRQ\n");
 
-	ret = devm_regmap_add_irq_chip(&client->dev, rk808->regmap, client->irq,
+	ret = devm_regmap_add_irq_chip(dev, rk808->regmap, irq,
 				       IRQF_ONESHOT, -1,
 				       rk808->regmap_irq_chip, &rk808->irq_data);
 	if (ret)
-		return dev_err_probe(&client->dev, ret, "Failed to add irq_chip\n");
+		return dev_err_probe(dev, ret, "Failed to add irq_chip\n");
 
 	for (i = 0; i < nr_pre_init_regs; i++) {
 		ret = regmap_update_bits(rk808->regmap,
@@ -743,45 +614,46 @@  static int rk808_probe(struct i2c_client *client)
 					pre_init_reg[i].mask,
 					pre_init_reg[i].value);
 		if (ret)
-			return dev_err_probe(&client->dev, ret, "0x%x write err\n",
+			return dev_err_probe(dev, ret, "0x%x write err\n",
 					     pre_init_reg[i].addr);
 	}
 
-	ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE,
+	ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
 			      cells, nr_cells, NULL, 0,
 			      regmap_irq_get_domain(rk808->irq_data));
 	if (ret)
-		return dev_err_probe(&client->dev, ret, "failed to add MFD devices\n");
+		return dev_err_probe(dev, ret, "failed to add MFD devices\n");
 
-	if (of_property_read_bool(np, "rockchip,system-power-controller")) {
-		ret = devm_register_sys_off_handler(&client->dev,
+	if (device_property_read_bool(dev, "rockchip,system-power-controller")) {
+		ret = devm_register_sys_off_handler(dev,
 				    SYS_OFF_MODE_POWER_OFF_PREPARE, SYS_OFF_PRIO_HIGH,
 				    &rk808_power_off, rk808);
 		if (ret)
-			return dev_err_probe(&client->dev, ret,
+			return dev_err_probe(dev, ret,
 					     "failed to register poweroff handler\n");
 
 		switch (rk808->variant) {
 		case RK809_ID:
 		case RK817_ID:
-			ret = devm_register_sys_off_handler(&client->dev,
+			ret = devm_register_sys_off_handler(dev,
 							    SYS_OFF_MODE_RESTART, SYS_OFF_PRIO_HIGH,
 							    &rk808_restart, rk808);
 			if (ret)
-				dev_warn(&client->dev, "failed to register rst handler, %d\n", ret);
+				dev_warn(dev, "failed to register rst handler, %d\n", ret);
 			break;
 		default:
-			dev_dbg(&client->dev, "pmic controlled board reset not supported\n");
+			dev_dbg(dev, "pmic controlled board reset not supported\n");
 			break;
 		}
 	}
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(rk8xx_probe);
 
-static int __maybe_unused rk8xx_suspend(struct device *dev)
+int rk8xx_suspend(struct device *dev)
 {
-	struct rk808 *rk808 = i2c_get_clientdata(to_i2c_client(dev));
+	struct rk808 *rk808 = dev_get_drvdata(dev);
 	int ret = 0;
 
 	switch (rk808->variant) {
@@ -804,10 +676,11 @@  static int __maybe_unused rk8xx_suspend(struct device *dev)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(rk8xx_suspend);
 
-static int __maybe_unused rk8xx_resume(struct device *dev)
+int rk8xx_resume(struct device *dev)
 {
-	struct rk808 *rk808 = i2c_get_clientdata(to_i2c_client(dev));
+	struct rk808 *rk808 = dev_get_drvdata(dev);
 	int ret = 0;
 
 	switch (rk808->variant) {
@@ -824,22 +697,10 @@  static int __maybe_unused rk8xx_resume(struct device *dev)
 
 	return ret;
 }
-static SIMPLE_DEV_PM_OPS(rk8xx_pm_ops, rk8xx_suspend, rk8xx_resume);
-
-static struct i2c_driver rk808_i2c_driver = {
-	.driver = {
-		.name = "rk808",
-		.of_match_table = rk808_of_match,
-		.pm = &rk8xx_pm_ops,
-	},
-	.probe_new = rk808_probe,
-	.shutdown = rk8xx_shutdown,
-};
-
-module_i2c_driver(rk808_i2c_driver);
+EXPORT_SYMBOL_GPL(rk8xx_resume);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
 MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
 MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
-MODULE_DESCRIPTION("RK808/RK818 PMIC driver");
+MODULE_DESCRIPTION("RK8xx PMIC core");
diff --git a/drivers/mfd/rk8xx-i2c.c b/drivers/mfd/rk8xx-i2c.c
new file mode 100644
index 000000000000..6d121b589fec
--- /dev/null
+++ b/drivers/mfd/rk8xx-i2c.c
@@ -0,0 +1,200 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Rockchip RK808/RK818 Core (I2C) driver
+ *
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ *
+ * Author: Chris Zhong <zyw@rock-chips.com>
+ * Author: Zhang Qing <zhangqing@rock-chips.com>
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ */
+
+#include <linux/i2c.h>
+#include <linux/mfd/rk808.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	/*
+	 * Notes:
+	 * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but
+	 *   we don't use that feature.  It's better to cache.
+	 * - It's unlikely we care that RK808_DEVCTRL_REG is volatile since
+	 *   bits are cleared in case when we shutoff anyway, but better safe.
+	 */
+
+	switch (reg) {
+	case RK808_SECONDS_REG ... RK808_WEEKS_REG:
+	case RK808_RTC_STATUS_REG:
+	case RK808_VB_MON_REG:
+	case RK808_THERMAL_REG:
+	case RK808_DCDC_UV_STS_REG:
+	case RK808_LDO_UV_STS_REG:
+	case RK808_DCDC_PG_REG:
+	case RK808_LDO_PG_REG:
+	case RK808_DEVCTRL_REG:
+	case RK808_INT_STS_REG1:
+	case RK808_INT_STS_REG2:
+		return true;
+	}
+
+	return false;
+}
+
+static bool rk817_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	/*
+	 * Notes:
+	 * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but
+	 *   we don't use that feature.  It's better to cache.
+	 */
+
+	switch (reg) {
+	case RK817_SECONDS_REG ... RK817_WEEKS_REG:
+	case RK817_RTC_STATUS_REG:
+	case RK817_CODEC_DTOP_LPT_SRST:
+	case RK817_GAS_GAUGE_ADC_CONFIG0 ... RK817_GAS_GAUGE_CUR_ADC_K0:
+	case RK817_PMIC_CHRG_STS:
+	case RK817_PMIC_CHRG_OUT:
+	case RK817_PMIC_CHRG_IN:
+	case RK817_INT_STS_REG0:
+	case RK817_INT_STS_REG1:
+	case RK817_INT_STS_REG2:
+	case RK817_SYS_STS:
+		return true;
+	}
+
+	return false;
+}
+
+
+static const struct regmap_config rk818_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RK818_USB_CTRL_REG,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = rk808_is_volatile_reg,
+};
+
+static const struct regmap_config rk805_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RK805_OFF_SOURCE_REG,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = rk808_is_volatile_reg,
+};
+
+static const struct regmap_config rk808_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RK808_IO_POL_REG,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = rk808_is_volatile_reg,
+};
+
+static const struct regmap_config rk817_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RK817_GPIO_INT_CFG,
+	.cache_type = REGCACHE_NONE,
+	.volatile_reg = rk817_is_volatile_reg,
+};
+
+static int rk8xx_i2c_get_variant(struct i2c_client *client)
+{
+	u8 pmic_id_msb, pmic_id_lsb;
+	int msb, lsb;
+
+	if (of_device_is_compatible(client->dev.of_node, "rockchip,rk817") ||
+	    of_device_is_compatible(client->dev.of_node, "rockchip,rk809")) {
+		pmic_id_msb = RK817_ID_MSB;
+		pmic_id_lsb = RK817_ID_LSB;
+	} else {
+		pmic_id_msb = RK808_ID_MSB;
+		pmic_id_lsb = RK808_ID_LSB;
+	}
+
+	/* Read chip variant */
+	msb = i2c_smbus_read_byte_data(client, pmic_id_msb);
+	if (msb < 0)
+		return dev_err_probe(&client->dev, msb, "failed to read the chip id MSB\n");
+
+	lsb = i2c_smbus_read_byte_data(client, pmic_id_lsb);
+	if (lsb < 0)
+		return dev_err_probe(&client->dev, lsb, "failed to read the chip id LSB\n");
+
+	return ((msb << 8) | lsb) & RK8XX_ID_MSK;
+}
+
+static int rk8xx_i2c_probe(struct i2c_client *client)
+{
+	const struct regmap_config *regmap_cfg;
+	struct regmap *regmap;
+	int variant;
+
+	variant = rk8xx_i2c_get_variant(client);
+	if (variant < 0)
+		return variant;
+
+	switch (variant) {
+	case RK805_ID:
+		regmap_cfg = &rk805_regmap_config;
+		break;
+	case RK808_ID:
+		regmap_cfg = &rk808_regmap_config;
+		break;
+	case RK818_ID:
+		regmap_cfg = &rk818_regmap_config;
+		break;
+	case RK809_ID:
+	case RK817_ID:
+		regmap_cfg = &rk817_regmap_config;
+		break;
+	default:
+		return dev_err_probe(&client->dev, -EINVAL, "Unsupported RK8XX ID %x\n", variant);
+	}
+
+	regmap = devm_regmap_init_i2c(client, regmap_cfg);
+	if (IS_ERR(regmap))
+		return dev_err_probe(&client->dev, PTR_ERR(regmap),
+				     "regmap initialization failed\n");
+
+	return rk8xx_probe(&client->dev, variant, client->irq, regmap);
+}
+
+static void rk8xx_i2c_shutdown(struct i2c_client *client)
+{
+	rk8xx_shutdown(&client->dev);
+}
+
+static SIMPLE_DEV_PM_OPS(rk8xx_i2c_pm_ops, rk8xx_suspend, rk8xx_resume);
+
+static const struct of_device_id rk8xx_i2c_of_match[] = {
+	{ .compatible = "rockchip,rk805" },
+	{ .compatible = "rockchip,rk808" },
+	{ .compatible = "rockchip,rk809" },
+	{ .compatible = "rockchip,rk817" },
+	{ .compatible = "rockchip,rk818" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, rk8xx_i2c_of_match);
+
+static struct i2c_driver rk8xx_i2c_driver = {
+	.driver = {
+		.name = "rk8xx-i2c",
+		.of_match_table = rk8xx_i2c_of_match,
+		.pm = &rk8xx_i2c_pm_ops,
+	},
+	.probe_new = rk8xx_i2c_probe,
+	.shutdown  = rk8xx_i2c_shutdown,
+};
+module_i2c_driver(rk8xx_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
+MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
+MODULE_DESCRIPTION("RK8xx I2C PMIC driver");
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 5787c579dcf6..77ff9a641aeb 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -407,7 +407,7 @@  config PINCTRL_PISTACHIO
 
 config PINCTRL_RK805
 	tristate "Pinctrl and GPIO driver for RK805 PMIC"
-	depends on MFD_RK808
+	depends on MFD_RK8XX
 	select GPIOLIB
 	select PINMUX
 	select GENERIC_PINCONF
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index c78be9f322e6..4a5e8e1d1237 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -706,7 +706,7 @@  config CHARGER_BQ256XX
 
 config CHARGER_RK817
 	tristate "Rockchip RK817 PMIC Battery Charger"
-	depends on MFD_RK808
+	depends on MFD_RK8XX
 	help
 	  Say Y to include support for Rockchip RK817 Battery Charger.
 
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index e5f3613c15fa..f2881fe3e0a7 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1056,7 +1056,7 @@  config REGULATOR_RC5T583
 
 config REGULATOR_RK808
 	tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power regulators"
-	depends on MFD_RK808
+	depends on MFD_RK8XX
 	help
 	  Select this option to enable the power regulator of ROCKCHIP
 	  PMIC RK805,RK809&RK817,RK808 and RK818.
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 753872408615..ffca9a8bb878 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -395,7 +395,7 @@  config RTC_DRV_NCT3018Y
 
 config RTC_DRV_RK808
 	tristate "Rockchip RK805/RK808/RK809/RK817/RK818 RTC"
-	depends on MFD_RK808
+	depends on MFD_RK8XX
 	help
 	  If you say yes here you will get support for the
 	  RTC of RK805, RK809 and RK817, RK808 and RK818 PMIC.
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index a89ddd9ba68e..4183427a80fe 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -794,4 +794,10 @@  struct rk808 {
 	const struct regmap_config	*regmap_cfg;
 	const struct regmap_irq_chip	*regmap_irq_chip;
 };
+
+void rk8xx_shutdown(struct device *dev);
+int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap *regmap);
+int rk8xx_suspend(struct device *dev);
+int rk8xx_resume(struct device *dev);
+
 #endif /* __LINUX_REGULATOR_RK808_H */
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 79d2362ad055..069a222c7cef 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -1313,7 +1313,7 @@  config SND_SOC_RK3328
 
 config SND_SOC_RK817
 	tristate "Rockchip RK817 audio CODEC"
-	depends on MFD_RK808 || COMPILE_TEST
+	depends on MFD_RK8XX || COMPILE_TEST
 
 config SND_SOC_RL6231
 	tristate