diff mbox series

[PATCHv2,2/6] firmware: stratix10-svc: add method for reading voltage and temperature

Message ID 20230508212852.8413-2-dinh.nguyen@linux.intel.com
State New
Headers show
Series None | expand

Commit Message

dinh.nguyen@linux.intel.com May 8, 2023, 9:28 p.m. UTC 
From: Dinh Nguyen <dinh.nguyen@linux.intel.com>

Add support for the hardware monitor driver to use the service driver
the ability to read voltage and temperature from the SDM.

Signed-off-by: Dinh Nguyen <dinh.nguyen@linux.intel.com>
---
 drivers/firmware/stratix10-svc.c              | 18 +++++++++-
 include/linux/firmware/intel/stratix10-smc.h  | 34 +++++++++++++++++++
 .../firmware/intel/stratix10-svc-client.h     |  6 ++++
 3 files changed, 57 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/firmware/stratix10-svc.c b/drivers/firmware/stratix10-svc.c
index bde1f543f529..cc1b8b441c37 100644
--- a/drivers/firmware/stratix10-svc.c
+++ b/drivers/firmware/stratix10-svc.c
@@ -340,6 +340,8 @@  static void svc_thread_recv_status_ok(struct stratix10_svc_data *p_data,
 	case COMMAND_RSU_MAX_RETRY:
 	case COMMAND_RSU_DCMF_STATUS:
 	case COMMAND_FIRMWARE_VERSION:
+	case COMMAND_HWMON_READTEMP:
+	case COMMAND_HWMON_READVOLT:
 		cb_data->status = BIT(SVC_STATUS_OK);
 		cb_data->kaddr1 = &res.a1;
 		break;
@@ -517,7 +519,17 @@  static int svc_normal_to_secure_thread(void *data)
 			a1 = (unsigned long)pdata->paddr;
 			a2 = 0;
 			break;
-
+		/* for HWMON */
+		case COMMAND_HWMON_READTEMP:
+			a0 = INTEL_SIP_SMC_HWMON_READTEMP;
+			a1 = pdata->arg[0];
+			a2 = 0;
+			break;
+		case COMMAND_HWMON_READVOLT:
+			a0 = INTEL_SIP_SMC_HWMON_READVOLT;
+			a1 = pdata->arg[0];
+			a2 = 0;
+			break;
 		/* for polling */
 		case COMMAND_POLL_SERVICE_STATUS:
 			a0 = INTEL_SIP_SMC_SERVICE_COMPLETED;
@@ -1182,6 +1194,10 @@  static int stratix10_svc_drv_probe(struct platform_device *pdev)
 	chans[2].name = SVC_CLIENT_FCS;
 	spin_lock_init(&chans[2].lock);
 
+	chans[3].ctrl = controller;
+	chans[3].name = SVC_CLIENT_HWMON;
+	spin_lock_init(&chans[3].lock);
+
 	list_add_tail(&controller->node, &svc_ctrl);
 	platform_set_drvdata(pdev, controller);
 
diff --git a/include/linux/firmware/intel/stratix10-smc.h b/include/linux/firmware/intel/stratix10-smc.h
index a718f853d457..b944ec4b2b2f 100644
--- a/include/linux/firmware/intel/stratix10-smc.h
+++ b/include/linux/firmware/intel/stratix10-smc.h
@@ -595,4 +595,38 @@  INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)
 #define INTEL_SIP_SMC_FCS_GET_PROVISION_DATA \
 	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FCS_GET_PROVISION_DATA)
 
+/**
+ * Request INTEL_SIP_SMC_HWMON_READTEMP
+ * Sync call to request temperature
+ *
+ * Call register usage:
+ * a0 Temperature Channel
+ * a1-a7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ * a1 Temperature Value
+ * a2-a3 not used
+ */
+#define INTEL_SIP_SMC_FUNCID_HWMON_READTEMP 32
+#define INTEL_SIP_SMC_HWMON_READTEMP \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_HWMON_READTEMP)
+
+/**
+ * Request INTEL_SIP_SMC_HWMON_READVOLT
+ * Sync call to request voltage
+ *
+ * Call register usage:
+ * a0 Voltage Channel
+ * a1-a7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ * a1 Voltage Value
+ * a2-a3 not used
+ */
+#define INTEL_SIP_SMC_FUNCID_HWMON_READVOLT 33
+#define INTEL_SIP_SMC_HWMON_READVOLT \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_HWMON_READVOLT)
+
 #endif
diff --git a/include/linux/firmware/intel/stratix10-svc-client.h b/include/linux/firmware/intel/stratix10-svc-client.h
index 0c16037fd08d..343970dcc2d2 100644
--- a/include/linux/firmware/intel/stratix10-svc-client.h
+++ b/include/linux/firmware/intel/stratix10-svc-client.h
@@ -11,10 +11,12 @@ 
  *
  * fpga: for FPGA configuration
  * rsu: for remote status update
+ * hwmon: for hardware monitoring (voltage and temperature)
  */
 #define SVC_CLIENT_FPGA			"fpga"
 #define SVC_CLIENT_RSU			"rsu"
 #define SVC_CLIENT_FCS			"fcs"
+#define SVC_CLIENT_HWMON		"hwmon"
 
 /*
  * Status of the sent command, in bit number
@@ -70,6 +72,7 @@ 
 #define SVC_RSU_REQUEST_TIMEOUT_MS              300
 #define SVC_FCS_REQUEST_TIMEOUT_MS		2000
 #define SVC_COMPLETED_TIMEOUT_MS		30000
+#define SVC_HWMON_REQUEST_TIMEOUT_MS		300
 
 struct stratix10_svc_chan;
 
@@ -164,6 +167,9 @@  enum stratix10_svc_command_code {
 	COMMAND_FCS_RANDOM_NUMBER_GEN,
 	/* for general status poll */
 	COMMAND_POLL_SERVICE_STATUS = 40,
+	/* for HWMON */
+	COMMAND_HWMON_READTEMP,
+	COMMAND_HWMON_READVOLT,
 	/* Non-mailbox SMC Call */
 	COMMAND_SMC_SVC_VERSION = 200,
 };