diff mbox series

[2/4] mmc: sdhci-esdhc-imx: remove redundant write protect code

Message ID 20230505084955.238940-2-haibo.chen@nxp.com
State New
Headers show
Series [1/4] mmc: sdhci-esdhc-imx: remove unused enum cd_types | expand

Commit Message

Bough Chen May 5, 2023, 8:49 a.m. UTC 
From: Haibo Chen <haibo.chen@nxp.com>

The logic of the esdhc_pltfm_get_ro() is just the same with common
code sdhci_check_ro(). So remove this redundant code, depends on
mmc_of_parse() and sdhci_check_ro() to cover the write protect
logic.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
---
 drivers/mmc/host/sdhci-esdhc-imx.c | 47 +-----------------------------
 1 file changed, 1 insertion(+), 46 deletions(-)
diff mbox series

Patch

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index c7db742f729c..54531aab70f0 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -201,22 +201,8 @@ 
 /* ERR004536 is not applicable for the IP  */
 #define ESDHC_FLAG_SKIP_ERR004536	BIT(17)
 
-enum wp_types {
-	ESDHC_WP_NONE,		/* no WP, neither controller nor gpio */
-	ESDHC_WP_CONTROLLER,	/* mmc controller internal WP */
-	ESDHC_WP_GPIO,		/* external gpio pin for WP */
-};
-
-/*
- * struct esdhc_platform_data - platform data for esdhc on i.MX
- *
- * ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35.
- *
- * @wp_type:	type of write_protect method (see wp_types enum above)
- */
-
+/* struct esdhc_platform_data - platform data for esdhc on i.MX */
 struct esdhc_platform_data {
-	enum wp_types wp_type;
 	int max_bus_width;
 	unsigned int delay_line;
 	unsigned int tuning_step;       /* The delay cell steps in tuning procedure */
@@ -994,25 +980,6 @@  static inline void esdhc_pltfm_set_clock(struct sdhci_host *host,
 
 }
 
-static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)
-{
-	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
-	struct esdhc_platform_data *boarddata = &imx_data->boarddata;
-
-	switch (boarddata->wp_type) {
-	case ESDHC_WP_GPIO:
-		return mmc_gpio_get_ro(host->mmc);
-	case ESDHC_WP_CONTROLLER:
-		return !(readl(host->ioaddr + SDHCI_PRESENT_STATE) &
-			       SDHCI_WRITE_PROTECT);
-	case ESDHC_WP_NONE:
-		break;
-	}
-
-	return -ENOSYS;
-}
-
 static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width)
 {
 	u32 ctrl;
@@ -1380,7 +1347,6 @@  static struct sdhci_ops sdhci_esdhc_ops = {
 	.get_max_clock = esdhc_pltfm_get_max_clock,
 	.get_min_clock = esdhc_pltfm_get_min_clock,
 	.get_max_timeout_count = esdhc_get_max_timeout_count,
-	.get_ro = esdhc_pltfm_get_ro,
 	.set_timeout = esdhc_set_timeout,
 	.set_bus_width = esdhc_pltfm_set_bus_width,
 	.set_uhs_signaling = esdhc_set_uhs_signaling,
@@ -1588,17 +1554,6 @@  sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
 	struct esdhc_platform_data *boarddata = &imx_data->boarddata;
 	int ret;
 
-	if (of_property_read_bool(np, "fsl,wp-controller"))
-		boarddata->wp_type = ESDHC_WP_CONTROLLER;
-
-	/*
-	 * If we have this property, then activate WP check.
-	 * Retrieveing and requesting the actual WP GPIO will happen
-	 * in the call to mmc_of_parse().
-	 */
-	if (of_property_read_bool(np, "wp-gpios"))
-		boarddata->wp_type = ESDHC_WP_GPIO;
-
 	of_property_read_u32(np, "fsl,tuning-step", &boarddata->tuning_step);
 	of_property_read_u32(np, "fsl,tuning-start-tap",
 			     &boarddata->tuning_start_tap);