diff mbox series

[v3,1/1] pinctrl: freescale: Fix a memory out of bounds when num_configs is 1

Message ID 20230504003330.1075531-2-xiaolei.wang@windriver.com
State Accepted
Commit 9063777ca1e2e895c5fdd493ee0c3f18fa710ed4
Headers show
Series pinctrl: freescale: Fix a memory out of bounds when num_configs is 1 | expand

Commit Message

Xiaolei Wang May 4, 2023, 12:33 a.m. UTC 
The config passed in by pad wakeup is 1, When num_configs is 1,
configs[1] should not be obtained, which will generate the
following memory out-of-bounds situation:

BUG: KASAN: stack out of bounds in imx_pinconf_set_scu+0x9c/0x160
  Read size 8 at address ffff8000104c7558 by task sh/664
  CPU: 3 PID: 664 Communication: sh Tainted: G WC 6.1.20 #1
     Hardware name: Freescale i.MX8QM MEK (DT)
  Call trace:
    dump_backtrace.part.0+0xe0/0xf0
    show stack+0x18/0x30
    dump_stack_lvl+0x64/0x80
    print report +0x154/0x458
    kasan_report+0xb8/0x100
    __asan_load8+0x80/0xac
    imx_pinconf_set_scu+0x9c/0x160
    imx_pinconf_set+0x6c/0x214
    pinconf_set_config+0x68/0x90
    pinctrl_gpio_set_config+0x138/0x170
    gpiochip_generic_config+0x44/0x60
    mxc_gpio_set_pad_wakeup+0x100/0x140

Fixes: f60c9eac54af ("gpio: mxc: enable pad wakeup on i.MX8x platforms")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
---
 drivers/pinctrl/freescale/pinctrl-scu.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/pinctrl/freescale/pinctrl-scu.c b/drivers/pinctrl/freescale/pinctrl-scu.c
index ea261b6e7458..3b252d684d72 100644
--- a/drivers/pinctrl/freescale/pinctrl-scu.c
+++ b/drivers/pinctrl/freescale/pinctrl-scu.c
@@ -90,7 +90,7 @@  int imx_pinconf_set_scu(struct pinctrl_dev *pctldev, unsigned pin_id,
 	struct imx_sc_msg_req_pad_set msg;
 	struct imx_sc_rpc_msg *hdr = &msg.hdr;
 	unsigned int mux = configs[0];
-	unsigned int conf = configs[1];
+	unsigned int conf;
 	unsigned int val;
 	int ret;
 
@@ -115,6 +115,7 @@  int imx_pinconf_set_scu(struct pinctrl_dev *pctldev, unsigned pin_id,
 	 * Set mux and conf together in one IPC call
 	 */
 	WARN_ON(num_configs != 2);
+	conf = configs[1];
 
 	val = conf | BM_PAD_CTL_IFMUX_ENABLE | BM_PAD_CTL_GP_ENABLE;
 	val |= mux << BP_PAD_CTL_IFMUX;