| Message ID | 20230507172941.364852-2-me@dylanvanassche.be |
|---|---|
| State | New |
| Headers | show |
| Series | leds: flash: leds-qcom-flash: add PMI8998 support | expand |
On Sun, 07 May 2023, Dylan Van Assche wrote: > Add subtype for the Qualcomm PMI8998 PMIC to support it besides the > PM8150 PMIC which has the same registers. Adjust the driver to recognize > both PMIC subtypes as a 3 channel LED driver. > > Signed-off-by: Dylan Van Assche <me@dylanvanassche.be> > --- > drivers/leds/flash/leds-qcom-flash.c | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) Applied, thanks
diff --git a/drivers/leds/flash/leds-qcom-flash.c b/drivers/leds/flash/leds-qcom-flash.c index 90a24fa25a49..16045b5d89b1 100644 --- a/drivers/leds/flash/leds-qcom-flash.c +++ b/drivers/leds/flash/leds-qcom-flash.c @@ -18,7 +18,8 @@ #define FLASH_TYPE_VAL 0x18 #define FLASH_SUBTYPE_REG 0x05 -#define FLASH_SUBTYPE_3CH_VAL 0x04 +#define FLASH_SUBTYPE_3CH_PM8150_VAL 0x04 +#define FLASH_SUBTYPE_3CH_PMI8998_VAL 0x03 #define FLASH_SUBTYPE_4CH_VAL 0x07 #define FLASH_STS_3CH_OTST1 BIT(0) @@ -682,7 +683,7 @@ static int qcom_flash_led_probe(struct platform_device *pdev) return rc; } - if (val == FLASH_SUBTYPE_3CH_VAL) { + if (val == FLASH_SUBTYPE_3CH_PM8150_VAL || val == FLASH_SUBTYPE_3CH_PMI8998_VAL) { flash_data->hw_type = QCOM_MVFLASH_3CH; flash_data->max_channels = 3; regs = mvflash_3ch_regs;
Add subtype for the Qualcomm PMI8998 PMIC to support it besides the PM8150 PMIC which has the same registers. Adjust the driver to recognize both PMIC subtypes as a 3 channel LED driver. Signed-off-by: Dylan Van Assche <me@dylanvanassche.be> --- drivers/leds/flash/leds-qcom-flash.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)