diff mbox series

[v2,8/8] arm64: dts: qcom: sc8280xp-x13s: Add QMP to SuperSpeed graph

Message ID 20230510031930.1996020-9-quic_bjorande@quicinc.com
State New
Headers show
Series phy: qcom-qmp-combo: Support orientation switching | expand

Commit Message

Bjorn Andersson May 10, 2023, 3:19 a.m. UTC 
Following the CRD, connect the two QMP phys inbetween the USB Type-C
connectors and the DisplayPort controller, to handle orientation
switching.

Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on HDK8450
Tested-by: Johan Hovold <johan+linaro@kernel.org>	# X13s
---

Changes since v1:
- None

 .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 28 ++++++++++++++++---
 1 file changed, 24 insertions(+), 4 deletions(-)

Comments

Johan Hovold May 12, 2023, 9:42 a.m. UTC | #1 
On Tue, May 09, 2023 at 08:19:30PM -0700, Bjorn Andersson wrote:
> Following the CRD, connect the two QMP phys inbetween the USB Type-C
> connectors and the DisplayPort controller, to handle orientation
> switching.
> 
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> Tested-by: Abel Vesa <abel.vesa@linaro.org>
> Tested-by: Steev Klimaszewski <steev@kali.org>
> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on HDK8450
> Tested-by: Johan Hovold <johan+linaro@kernel.org>	# X13s
> ---
> 
> Changes since v1:
> - None

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 5ef3f4c07d75..382f27946468 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -106,7 +106,7 @@  port@1 {
 					reg = <1>;
 
 					pmic_glink_con0_ss: endpoint {
-						remote-endpoint = <&mdss0_dp0_out>;
+						remote-endpoint = <&usb_0_qmpphy_out>;
 					};
 				};
 
@@ -141,7 +141,7 @@  port@1 {
 					reg = <1>;
 
 					pmic_glink_con1_ss: endpoint {
-						remote-endpoint = <&mdss0_dp1_out>;
+						remote-endpoint = <&usb_1_qmpphy_out>;
 					};
 				};
 
@@ -554,7 +554,7 @@  &mdss0_dp0 {
 
 &mdss0_dp0_out {
 	data-lanes = <0 1>;
-	remote-endpoint = <&pmic_glink_con0_ss>;
+	remote-endpoint = <&usb_0_qmpphy_dp_in>;
 };
 
 &mdss0_dp1 {
@@ -563,7 +563,7 @@  &mdss0_dp1 {
 
 &mdss0_dp1_out {
 	data-lanes = <0 1>;
-	remote-endpoint = <&pmic_glink_con1_ss>;
+	remote-endpoint = <&usb_1_qmpphy_dp_in>;
 };
 
 &mdss0_dp3 {
@@ -1140,9 +1140,19 @@  &usb_0_qmpphy {
 	vdda-phy-supply = <&vreg_l9d>;
 	vdda-pll-supply = <&vreg_l4d>;
 
+	orientation-switch;
+
 	status = "okay";
 };
 
+&usb_0_qmpphy_dp_in {
+	remote-endpoint = <&mdss0_dp0_out>;
+};
+
+&usb_0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con0_ss>;
+};
+
 &usb_0_role_switch {
 	remote-endpoint = <&pmic_glink_con0_hs>;
 };
@@ -1167,9 +1177,19 @@  &usb_1_qmpphy {
 	vdda-phy-supply = <&vreg_l4b>;
 	vdda-pll-supply = <&vreg_l3b>;
 
+	orientation-switch;
+
 	status = "okay";
 };
 
+&usb_1_qmpphy_dp_in {
+	remote-endpoint = <&mdss0_dp1_out>;
+};
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con1_ss>;
+};
+
 &usb_1_role_switch {
 	remote-endpoint = <&pmic_glink_con1_hs>;
 };