| Message ID | 20230203-evk-board-support-v7-6-98cbdfac656e@baylibre.com |
|---|---|
| State | New |
| Headers | show |
| Series | Improve the MT8365 SoC and EVK board support | expand |
Il 11/05/23 18:29, amergnat@baylibre.com ha scritto: > From: Fabien Parent <fparent@baylibre.com> > > On downstream, we observe that the MSDC IP (used by the emmc, the micro > SD card and the WiFi) isn't working properly if the VMC regulator is > shutdown. > > Make sure it is always on. I don't understand the power tree of this board: if your VQMMC is VIO18 and *not* VMC, why is that required? The real question is if we're facing one more supply as requirement for newer MediaTek SoCs and whether it would be a better idea to add that to the actual driver (and/or as a power domain supply!!!) to both better represent the power tree and to eventually allow deep power saving states. Regards, Angelo > > Signed-off-by: Fabien Parent <fparent@baylibre.com> > Tested-by: Kevin Hilman <khilman@baylibre.com> > Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> > --- > arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts > index 752007d0598e..5d69b39c8746 100644 > --- a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts > +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts > @@ -137,6 +137,11 @@ &mt6357_pmic { > #interrupt-cells = <2>; > }; > > +/* Needed by MSDC IP */ > +&mt6357_vmc_reg { > + regulator-always-on; > +}; > + > &pio { > gpio_keys: gpio-keys-pins { > pins { >
diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts index 752007d0598e..5d69b39c8746 100644 --- a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts @@ -137,6 +137,11 @@ &mt6357_pmic { #interrupt-cells = <2>; }; +/* Needed by MSDC IP */ +&mt6357_vmc_reg { + regulator-always-on; +}; + &pio { gpio_keys: gpio-keys-pins { pins {