Message ID | 20230511091549.28003-4-walker.chen@starfivetech.com |
---|---|
State | Superseded |
Headers | show |
Series | Add TDM audio on StarFive JH7110 | expand |
On Mon, May 15, 2023 at 09:58:12AM +0100, Conor Dooley wrote: > It's only been 4 days chief, of which 2 were the weekend, you don't need > to bump it yet! You'd be better off asking one of your co-workers to 4 days, 2 of which were the weekend and 4 of which I was on holiday...
On 2023/5/15 16:58, Conor Dooley wrote: > On Mon, May 15, 2023 at 04:44:54PM +0800, Walker Chen wrote: > >> Hi Conor / Emil, >> >> Based on our discussion a few days ago, the new version of patch for dts looks like this, >> Please help to review and provide your comments if you feel free. > >> On 2023/5/11 17:15, Walker Chen wrote: > > It's only been 4 days chief, of which 2 were the weekend, you don't need > to bump it yet! You'd be better off asking one of your co-workers to > review the content, instead of me. I'll happily apply the patch, with > appropriate review, once the dt-binding has been applied by Mark. I do > not have the capacity to review the detail of individual patches adding > peripherals unfortunately. > Getting your co-workers to look at your patches, and doing the same for > theirs, is almost always a good idea for speeding up the process Oh, Conor, perhaps I was too eager to finish the work quickly. Sorry for that! Maybe I need to ask my co-worker to review firstly as you said. Best regards, Walker
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi index 1155b97b593d..19b5954ee72d 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -214,6 +214,40 @@ slew-rate = <0>; }; }; + + tdm0_pins: tdm0-pins { + tdm0-pins-tx { + pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD, + GPOEN_ENABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <2>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + tdm0-pins-rx { + pinmux = <GPIOMUX(61, GPOUT_HIGH, + GPOEN_DISABLE, + GPI_SYS_TDM_RXD)>; + input-enable; + }; + + tdm0-pins-sync { + pinmux = <GPIOMUX(63, GPOUT_HIGH, + GPOEN_DISABLE, + GPI_SYS_TDM_SYNC)>; + input-enable; + }; + + tdm0-pins-pcmclk { + pinmux = <GPIOMUX(38, GPOUT_HIGH, + GPOEN_DISABLE, + GPI_SYS_TDM_CLK)>; + input-enable; + }; + }; }; &uart0 { @@ -221,3 +255,9 @@ pinctrl-0 = <&uart0_pins>; status = "okay"; }; + +&tdm { + pinctrl-names = "default"; + pinctrl-0 = <&tdm0_pins>; + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi index 866313570a7e..cfda6fb0d91b 100644 --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi @@ -366,6 +366,27 @@ status = "disabled"; }; + tdm: tdm@10090000 { + compatible = "starfive,jh7110-tdm"; + reg = <0x0 0x10090000 0x0 0x1000>; + clocks = <&syscrg JH7110_SYSCLK_TDM_AHB>, + <&syscrg JH7110_SYSCLK_TDM_APB>, + <&syscrg JH7110_SYSCLK_TDM_INTERNAL>, + <&syscrg JH7110_SYSCLK_TDM_TDM>, + <&syscrg JH7110_SYSCLK_MCLK_INNER>, + <&tdm_ext>; + clock-names = "tdm_ahb", "tdm_apb", + "tdm_internal", "tdm", + "mclk_inner", "tdm_ext"; + resets = <&syscrg JH7110_SYSRST_TDM_AHB>, + <&syscrg JH7110_SYSRST_TDM_APB>, + <&syscrg JH7110_SYSRST_TDM_CORE>; + dmas = <&dma 20>, <&dma 21>; + dma-names = "rx","tx"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + stgcrg: clock-controller@10230000 { compatible = "starfive,jh7110-stgcrg"; reg = <0x0 0x10230000 0x0 0x10000>;
Add the tdm controller node and pins configuration of tdm for the StarFive JH7110 SoC. Signed-off-by: Walker Chen <walker.chen@starfivetech.com> --- .../jh7110-starfive-visionfive-2.dtsi | 40 +++++++++++++++++++ arch/riscv/boot/dts/starfive/jh7110.dtsi | 21 ++++++++++ 2 files changed, 61 insertions(+)