diff mbox series

[v4,6/6] serial: 8250_rt288x: Remove unnecessary UART_REG_UNMAPPED

Message ID 20230511121029.13128-7-ilpo.jarvinen@linux.intel.com
State New
Headers show
Series serial: Separate RT288x/Au1xxx code into own file | expand

Commit Message

Ilpo Järvinen May 11, 2023, 12:10 p.m. UTC
As unmapped registers are at the tail of the array, the ARRAY_SIZE()
condition will catch them just fine. No need to define special
value for them.

Convert the arrays to u8 as all entiries are now positive.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/tty/serial/8250/8250_rt288x.c | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/8250/8250_rt288x.c b/drivers/tty/serial/8250/8250_rt288x.c
index b091a1269bfa..6415ca8d3adf 100644
--- a/drivers/tty/serial/8250/8250_rt288x.c
+++ b/drivers/tty/serial/8250/8250_rt288x.c
@@ -14,10 +14,8 @@ 
 
 #define RT288X_DL	0x28
 
-#define UART_REG_UNMAPPED	-1
-
 /* Au1x00/RT288x UART hardware has a weird register layout */
-static const s8 au_io_in_map[8] = {
+static const u8 au_io_in_map[7] = {
 	[UART_RX]	= 0,
 	[UART_IER]	= 2,
 	[UART_IIR]	= 3,
@@ -25,18 +23,14 @@  static const s8 au_io_in_map[8] = {
 	[UART_MCR]	= 6,
 	[UART_LSR]	= 7,
 	[UART_MSR]	= 8,
-	[UART_SCR]	= UART_REG_UNMAPPED,
 };
 
-static const s8 au_io_out_map[8] = {
+static const u8 au_io_out_map[5] = {
 	[UART_TX]	= 1,
 	[UART_IER]	= 2,
 	[UART_FCR]	= 4,
 	[UART_LCR]	= 5,
 	[UART_MCR]	= 6,
-	[UART_LSR]	= UART_REG_UNMAPPED,
-	[UART_MSR]	= UART_REG_UNMAPPED,
-	[UART_SCR]	= UART_REG_UNMAPPED,
 };
 
 static unsigned int au_serial_in(struct uart_port *p, int offset)
@@ -44,8 +38,7 @@  static unsigned int au_serial_in(struct uart_port *p, int offset)
 	if (offset >= ARRAY_SIZE(au_io_in_map))
 		return UINT_MAX;
 	offset = au_io_in_map[offset];
-	if (offset == UART_REG_UNMAPPED)
-		return UINT_MAX;
+
 	return __raw_readl(p->membase + (offset << p->regshift));
 }
 
@@ -54,8 +47,7 @@  static void au_serial_out(struct uart_port *p, int offset, int value)
 	if (offset >= ARRAY_SIZE(au_io_out_map))
 		return;
 	offset = au_io_out_map[offset];
-	if (offset == UART_REG_UNMAPPED)
-		return;
+
 	__raw_writel(value, p->membase + (offset << p->regshift));
 }