diff mbox series

[v9,7/8] drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets

Message ID 1684185928-24195-8-git-send-email-quic_khsieh@quicinc.com
State Superseded
Headers show
Series add DSC 1.2 dpu supports | expand

Commit Message

Kuogee Hsieh May 15, 2023, 9:25 p.m. UTC 
From: Abhinav Kumar <quic_abhinavk@quicinc.com>

Add DSC 1.2 hardware blocks to the catalog with necessary sub-block and
feature flag information.  Each display compression engine (DCE) contains
dual hard slice DSC encoders so both share same base address but with
its own different sub block address.

changes in v4:
-- delete DPU_DSC_HW_REV_1_1
-- re arrange sc8280xp_dsc[]

changes in v4:
-- fix checkpatch warning

Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 .../gpu/drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h | 14 ++++++++++++
 .../gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h |  7 ++++++
 .../drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h   | 16 ++++++++++++++
 .../gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h | 14 ++++++++++++
 .../gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h | 14 ++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     | 25 +++++++++++++++++++++-
 6 files changed, 89 insertions(+), 1 deletion(-)

Comments

Marijn Suijten May 15, 2023, 10:49 p.m. UTC | #1 
On 2023-05-15 14:25:27, Kuogee Hsieh wrote:
> 
> From: Abhinav Kumar <quic_abhinavk@quicinc.com>
> 
> Add DSC 1.2 hardware blocks to the catalog with necessary sub-block and
> feature flag information.  Each display compression engine (DCE) contains
> dual hard slice DSC encoders so both share same base address but with
> its own different sub block address.
> 
> changes in v4:
> -- delete DPU_DSC_HW_REV_1_1
> -- re arrange sc8280xp_dsc[]
> 
> changes in v4:
> -- fix checkpatch warning
> 
> Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  .../gpu/drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h | 14 ++++++++++++
>  .../gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h |  7 ++++++
>  .../drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h   | 16 ++++++++++++++
>  .../gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h | 14 ++++++++++++
>  .../gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h | 14 ++++++++++++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     | 25 +++++++++++++++++++++-
>  6 files changed, 89 insertions(+), 1 deletion(-)

My review for this patch came in on v8 a minute prior to this v9: can
you retroactively apply it?

- Marijn
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h
index 500cfd0..c4c93c8 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h
@@ -153,6 +153,18 @@  static const struct dpu_merge_3d_cfg sm8350_merge_3d[] = {
 	MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x50000),
 };
 
+/*
+ * NOTE: Each display compression engine (DCE) contains dual hard
+ * slice DSC encoders so both share same base address but with
+ * its own different sub block address.
+ */
+static const struct dpu_dsc_cfg sm8350_dsc[] = {
+	DSC_BLK_1_2("dce_0", DSC_0, 0x80000, 0x100, 0, dsc_sblk_0),
+	DSC_BLK_1_2("dce_0", DSC_1, 0x80000, 0x100, 0, dsc_sblk_1),
+	DSC_BLK_1_2("dce_1", DSC_2, 0x81000, 0x100, BIT(DPU_DSC_NATIVE_422_EN), dsc_sblk_0),
+	DSC_BLK_1_2("dce_1", DSC_3, 0x81000, 0x100, BIT(DPU_DSC_NATIVE_422_EN), dsc_sblk_1),
+};
+
 static const struct dpu_intf_cfg sm8350_intf[] = {
 	INTF_BLK("intf_0", INTF_0, 0x34000, 0x280, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK,
 			DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 24),
@@ -215,6 +227,8 @@  const struct dpu_mdss_cfg dpu_sm8350_cfg = {
 	.dspp = sm8350_dspp,
 	.pingpong_count = ARRAY_SIZE(sm8350_pp),
 	.pingpong = sm8350_pp,
+	.dsc = sm8350_dsc,
+	.dsc_count = ARRAY_SIZE(sm8350_dsc),
 	.merge_3d_count = ARRAY_SIZE(sm8350_merge_3d),
 	.merge_3d = sm8350_merge_3d,
 	.intf_count = ARRAY_SIZE(sm8350_intf),
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h
index 5646713..42c66fe 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h
@@ -93,6 +93,11 @@  static const struct dpu_pingpong_cfg sc7280_pp[] = {
 	PP_BLK_DITHER("pingpong_3", PINGPONG_3, 0x6c000, 0, sc7280_pp_sblk, -1, -1),
 };
 
+/* NOTE: sc7280 only has one dsc hard slice encoder */
+static const struct dpu_dsc_cfg sc7280_dsc[] = {
+	DSC_BLK_1_2("dce_0", DSC_0, 0x80000, 0x100, BIT(DPU_DSC_NATIVE_422_EN), dsc_sblk_0),
+};
+
 static const struct dpu_intf_cfg sc7280_intf[] = {
 	INTF_BLK("intf_0", INTF_0, 0x34000, 0x280, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK,
 			DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 24),
@@ -149,6 +154,8 @@  const struct dpu_mdss_cfg dpu_sc7280_cfg = {
 	.mixer = sc7280_lm,
 	.pingpong_count = ARRAY_SIZE(sc7280_pp),
 	.pingpong = sc7280_pp,
+	.dsc_count = ARRAY_SIZE(sc7280_dsc),
+	.dsc = sc7280_dsc,
 	.intf_count = ARRAY_SIZE(sc7280_intf),
 	.intf = sc7280_intf,
 	.vbif_count = ARRAY_SIZE(sdm845_vbif),
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h
index 808aacd..1901fff 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h
@@ -141,6 +141,20 @@  static const struct dpu_merge_3d_cfg sc8280xp_merge_3d[] = {
 	MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x50000),
 };
 
+/*
+ * NOTE: Each display compression engine (DCE) contains dual hard
+ * slice DSC encoders so both share same base address but with
+ * its own different sub block address.
+ */
+static const struct dpu_dsc_cfg sc8280xp_dsc[] = {
+	DSC_BLK_1_2("dce_0", DSC_0, 0x80000, 0x100, 0, dsc_sblk_0),
+	DSC_BLK_1_2("dce_0", DSC_1, 0x80000, 0x100, 0, dsc_sblk_1),
+	DSC_BLK_1_2("dce_1", DSC_2, 0x81000, 0x100, BIT(DPU_DSC_NATIVE_422_EN), dsc_sblk_0),
+	DSC_BLK_1_2("dce_1", DSC_3, 0x81000, 0x100, BIT(DPU_DSC_NATIVE_422_EN), dsc_sblk_1),
+	DSC_BLK_1_2("dce_2", DSC_4, 0x82000, 0x100, 0, dsc_sblk_0),
+	DSC_BLK_1_2("dce_2", DSC_5, 0x82000, 0x100, 0, dsc_sblk_1),
+};
+
 /* TODO: INTF 3, 8 and 7 are used for MST, marked as INTF_NONE for now */
 static const struct dpu_intf_cfg sc8280xp_intf[] = {
 	INTF_BLK("intf_0", INTF_0, 0x34000, 0x280, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK,
@@ -216,6 +230,8 @@  const struct dpu_mdss_cfg dpu_sc8280xp_cfg = {
 	.dspp = sc8280xp_dspp,
 	.pingpong_count = ARRAY_SIZE(sc8280xp_pp),
 	.pingpong = sc8280xp_pp,
+	.dsc = sc8280xp_dsc,
+	.dsc_count = ARRAY_SIZE(sc8280xp_dsc),
 	.merge_3d_count = ARRAY_SIZE(sc8280xp_merge_3d),
 	.merge_3d = sc8280xp_merge_3d,
 	.intf_count = ARRAY_SIZE(sc8280xp_intf),
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h
index 1a89ff9..741d03f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h
@@ -161,6 +161,18 @@  static const struct dpu_merge_3d_cfg sm8450_merge_3d[] = {
 	MERGE_3D_BLK("merge_3d_3", MERGE_3D_3, 0x65f00),
 };
 
+/*
+ * NOTE: Each display compression engine (DCE) contains dual hard
+ * slice DSC encoders so both share same base address but with
+ * its own different sub block address.
+ */
+static const struct dpu_dsc_cfg sm8450_dsc[] = {
+	DSC_BLK_1_2("dce_0", DSC_0, 0x80000, 0x100, 0, dsc_sblk_0),
+	DSC_BLK_1_2("dce_0", DSC_1, 0x80000, 0x100, 0, dsc_sblk_1),
+	DSC_BLK_1_2("dce_1", DSC_2, 0x81000, 0x100, BIT(DPU_DSC_NATIVE_422_EN), dsc_sblk_0),
+	DSC_BLK_1_2("dce_1", DSC_3, 0x81000, 0x100, BIT(DPU_DSC_NATIVE_422_EN), dsc_sblk_1),
+};
+
 static const struct dpu_intf_cfg sm8450_intf[] = {
 	INTF_BLK("intf_0", INTF_0, 0x34000, 0x280, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK,
 			DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 24),
@@ -223,6 +235,8 @@  const struct dpu_mdss_cfg dpu_sm8450_cfg = {
 	.dspp = sm8450_dspp,
 	.pingpong_count = ARRAY_SIZE(sm8450_pp),
 	.pingpong = sm8450_pp,
+	.dsc = sm8450_dsc,
+	.dsc_count = ARRAY_SIZE(sm8450_dsc),
 	.merge_3d_count = ARRAY_SIZE(sm8450_merge_3d),
 	.merge_3d = sm8450_merge_3d,
 	.intf_count = ARRAY_SIZE(sm8450_intf),
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h
index 497b34c..3ee6dc8 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h
@@ -165,6 +165,18 @@  static const struct dpu_merge_3d_cfg sm8550_merge_3d[] = {
 	MERGE_3D_BLK("merge_3d_3", MERGE_3D_3, 0x66700),
 };
 
+/*
+ * NOTE: Each display compression engine (DCE) contains dual hard
+ * slice DSC encoders so both share same base address but with
+ * its own different sub block address.
+ */
+static const struct dpu_dsc_cfg sm8550_dsc[] = {
+	DSC_BLK_1_2("dce_0", DSC_0, 0x80000, 0x100, 0, dsc_sblk_0),
+	DSC_BLK_1_2("dce_0", DSC_1, 0x80000, 0x100, 0, dsc_sblk_1),
+	DSC_BLK_1_2("dce_1", DSC_2, 0x81000, 0x100, BIT(DPU_DSC_NATIVE_422_EN), dsc_sblk_0),
+	DSC_BLK_1_2("dce_1", DSC_3, 0x81000, 0x100, BIT(DPU_DSC_NATIVE_422_EN), dsc_sblk_1),
+};
+
 static const struct dpu_intf_cfg sm8550_intf[] = {
 	INTF_BLK("intf_0", INTF_0, 0x34000, 0x280, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK,
 			DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 24),
@@ -227,6 +239,8 @@  const struct dpu_mdss_cfg dpu_sm8550_cfg = {
 	.dspp = sm8550_dspp,
 	.pingpong_count = ARRAY_SIZE(sm8550_pp),
 	.pingpong = sm8550_pp,
+	.dsc = sm8550_dsc,
+	.dsc_count = ARRAY_SIZE(sm8550_dsc),
 	.merge_3d_count = ARRAY_SIZE(sm8550_merge_3d),
 	.merge_3d = sm8550_merge_3d,
 	.intf_count = ARRAY_SIZE(sm8550_intf),
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index f2a1535..9612ab5 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -1,6 +1,6 @@ 
 // SPDX-License-Identifier: GPL-2.0-only
 /* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
- * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2022-2023, Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #define pr_fmt(fmt)	"[drm:%s:%d] " fmt, __func__, __LINE__
@@ -522,6 +522,16 @@  static const struct dpu_pingpong_sub_blks sc7280_pp_sblk = {
 /*************************************************************
  * DSC sub blocks config
  *************************************************************/
+static const struct dpu_dsc_sub_blks dsc_sblk_0 = {
+	.enc = {.base = 0x100, .len = 0x100},
+	.ctl = {.base = 0xF00, .len = 0x10},
+};
+
+static const struct dpu_dsc_sub_blks dsc_sblk_1 = {
+	.enc = {.base = 0x200, .len = 0x100},
+	.ctl = {.base = 0xF80, .len = 0x10},
+};
+
 #define DSC_BLK(_name, _id, _base, _features) \
 	{\
 	.name = _name, .id = _id, \
@@ -529,6 +539,19 @@  static const struct dpu_pingpong_sub_blks sc7280_pp_sblk = {
 	.features = _features, \
 	}
 
+/*
+ * NOTE: Each display compression engine (DCE) contains dual hard
+ * slice DSC encoders so both share same base address but with
+ * its own different sub block address.
+ */
+#define DSC_BLK_1_2(_name, _id, _base, _len, _features, _sblk) \
+	{\
+	.name = _name, .id = _id, \
+	.base = _base, .len = _len, \
+	.features = BIT(DPU_DSC_HW_REV_1_2) | _features, \
+	.sblk = &_sblk, \
+	}
+
 /*************************************************************
  * INTF sub blocks config
  *************************************************************/