@@ -77,6 +77,9 @@ config ACPI_DEBUGGER_USER
endif
+config ACPI_SPCR_TABLE
+ bool
+
config ACPI_SLEEP
bool
depends on SUSPEND || HIBERNATION
@@ -82,6 +82,7 @@ obj-$(CONFIG_ACPI_EC_DEBUGFS) += ec_sys.o
obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o
obj-$(CONFIG_ACPI_BGRT) += bgrt.o
obj-$(CONFIG_ACPI_CPPC_LIB) += cppc_acpi.o
+obj-$(CONFIG_ACPI_SPCR_TABLE) += spcr.o
obj-$(CONFIG_ACPI_DEBUGGER_USER) += acpi_dbg.o
# processor has its own "processor." module_param namespace
new file mode 100644
@@ -0,0 +1,111 @@
+/*
+ * Copyright (c) 2012, Intel Corporation
+ * Copyright (c) 2015, Red Hat, Inc.
+ * Copyright (c) 2015, 2016 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define pr_fmt(fmt) "ACPI: SPCR: " fmt
+
+#include <linux/acpi.h>
+#include <linux/console.h>
+#include <linux/kernel.h>
+#include <linux/serial_core.h>
+
+/**
+ * parse_spcr() - parse ACPI SPCR table and add preferred console
+ *
+ * @earlycon: set up earlycon for the console specified by the table
+ *
+ * For the architectures with support for ACPI, CONFIG_ACPI_SPCR_TABLE may be
+ * defined to parse ACPI SPCR table. As a result of the parsing preferred
+ * console is registered and if @earlycon is true, earlycon is set up.
+ *
+ * When CONFIG_ACPI_SPCR_TABLE is defined, this function should be called
+ * from arch inintialization code as soon as the DT/ACPI decision is made.
+ *
+ */
+int __init parse_spcr(bool earlycon)
+{
+ static char opts[64];
+ struct acpi_table_spcr *table;
+ acpi_size table_size;
+ acpi_status status;
+ char *uart;
+ char *iotype;
+ int baud_rate;
+ int err;
+
+ if (acpi_disabled)
+ return -ENODEV;
+
+ status = acpi_get_table_with_size(ACPI_SIG_SPCR, 0,
+ (struct acpi_table_header **)&table,
+ &table_size);
+
+ if (ACPI_FAILURE(status))
+ return -ENOENT;
+
+ if (table->header.revision < 2) {
+ err = -ENOENT;
+ pr_err("wrong table version\n");
+ goto done;
+ }
+
+ iotype = table->serial_port.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY ?
+ "mmio" : "io";
+
+ switch (table->interface_type) {
+ case ACPI_DBG2_ARM_SBSA_32BIT:
+ iotype = "mmio32";
+ /* fall through */
+ case ACPI_DBG2_ARM_PL011:
+ case ACPI_DBG2_ARM_SBSA_GENERIC:
+ case ACPI_DBG2_BCM2835:
+ uart = "pl011";
+ break;
+ case ACPI_DBG2_16550_COMPATIBLE:
+ case ACPI_DBG2_16550_SUBSET:
+ uart = "uart";
+ break;
+ default:
+ err = -ENOENT;
+ goto done;
+ }
+
+ switch (table->baud_rate) {
+ case 3:
+ baud_rate = 9600;
+ break;
+ case 4:
+ baud_rate = 19200;
+ break;
+ case 6:
+ baud_rate = 57600;
+ break;
+ case 7:
+ baud_rate = 115200;
+ break;
+ default:
+ err = -ENOENT;
+ goto done;
+ }
+
+ snprintf(opts, sizeof(opts), "%s,%s,0x%llx,%d", uart, iotype,
+ table->serial_port.address, baud_rate);
+
+ pr_info("console: %s", opts);
+
+ if (earlycon)
+ setup_earlycon(opts);
+
+ err = add_preferred_console(uart, 0, opts + strlen(uart) + 1);
+
+done:
+ early_acpi_os_unmap_memory((void __iomem *)table, table_size);
+ return err;
+}
@@ -21,6 +21,7 @@
#include <linux/sizes.h>
#include <linux/of.h>
#include <linux/of_fdt.h>
+#include <linux/acpi.h>
#ifdef CONFIG_FIX_EARLYCON_MEM
#include <asm/fixmap.h>
@@ -199,6 +200,14 @@ int __init setup_earlycon(char *buf)
return -ENOENT;
}
+/*
+ * When CONFIG_ACPI_SPCR_TABLE is defined, "earlycon" without parameters in
+ * command line does not start DT earlycon immediately, instead it defers
+ * starting it until DT/ACPI decision is made. At that time if ACPI is enabled
+ * call parse_spcr(), else call early_init_dt_scan_chosen_stdout()
+ */
+bool earlycon_init_is_deferred __initdata;
+
/* early_param wrapper for setup_earlycon() */
static int __init param_setup_earlycon(char *buf)
{
@@ -208,8 +217,14 @@ static int __init param_setup_earlycon(char *buf)
* Just 'earlycon' is a valid param for devicetree earlycons;
* don't generate a warning from parse_early_params() in that case
*/
- if (!buf || !buf[0])
- return early_init_dt_scan_chosen_stdout();
+ if (!buf || !buf[0]) {
+ if (IS_ENABLED(CONFIG_ACPI_SPCR_TABLE)) {
+ earlycon_init_is_deferred = true;
+ return 0;
+ } else {
+ return early_init_dt_scan_chosen_stdout();
+ }
+ }
err = setup_earlycon(buf);
if (err == -ENOENT || err == -EALREADY)
@@ -997,4 +997,10 @@ static inline struct fwnode_handle *acpi_get_next_subnode(struct device *dev,
#define acpi_probe_device_table(t) ({ int __r = 0; __r;})
#endif
+#ifdef CONFIG_ACPI_SPCR_TABLE
+int parse_spcr(bool earlycon);
+#else
+static inline int parse_spcr(bool earlycon) { return 0; }
+#endif
+
#endif /*_LINUX_ACPI_H*/
@@ -366,6 +366,12 @@ extern int of_setup_earlycon(const struct earlycon_id *match,
unsigned long node,
const char *options);
+#ifdef CONFIG_SERIAL_EARLYCON
+extern bool earlycon_init_is_deferred __initdata;
+#else
+static const bool earlycon_init_is_deferred;
+#endif
+
struct uart_port *uart_get_console(struct uart_port *ports, int nr,
struct console *c);
int uart_parse_earlycon(char *p, unsigned char *iotype, unsigned long *addr,