@@ -76,13 +76,13 @@
(BIT(DPU_DIM_LAYER) | BIT(DPU_MIXER_COMBINED_ALPHA))
#define PINGPONG_SDM845_MASK \
- (BIT(DPU_PINGPONG_DITHER) | BIT(DPU_PINGPONG_TE))
+ (BIT(DPU_PINGPONG_DITHER) | BIT(DPU_PINGPONG_TE) | BIT(DPU_PINGPONG_DSC))
#define PINGPONG_SDM845_TE2_MASK \
(PINGPONG_SDM845_MASK | BIT(DPU_PINGPONG_TE2))
#define PINGPONG_SM8150_MASK \
- (BIT(DPU_PINGPONG_DITHER))
+ (BIT(DPU_PINGPONG_DITHER) | BIT(DPU_PINGPONG_DSC))
#define CTL_SC7280_MASK \
(BIT(DPU_CTL_ACTIVE_CFG) | \
@@ -144,7 +144,8 @@ enum {
* @DPU_PINGPONG_TE2 Additional tear check block for split pipes
* @DPU_PINGPONG_SPLIT PP block supports split fifo
* @DPU_PINGPONG_SLAVE PP block is a suitable slave for split fifo
- * @DPU_PINGPONG_DITHER, Dither blocks
+ * @DPU_PINGPONG_DITHER Dither blocks
+ * @DPU_PINGPONG_DSC PP block supports DSC
* @DPU_PINGPONG_MAX
*/
enum {
@@ -153,6 +154,7 @@ enum {
DPU_PINGPONG_SPLIT,
DPU_PINGPONG_SLAVE,
DPU_PINGPONG_DITHER,
+ DPU_PINGPONG_DSC,
DPU_PINGPONG_MAX
};
DPU < 7.0.0 requires the PINGPONG block to be involved during DSC setting up. Since DPU >= 7.0.0, enabling and starting the DSC encoder engine was moved to INTF with the help of the flush mechanism. Add a DPU_PINGPONG_DSC feature bit to restrict the availability of dpu_hw_pp_setup_dsc() and dpu_hw_pp_dsc_{enable,disable}() on the PINGPONG block to DPU < 7.0.0 hardware, as the registers are not available on DPU 7.0.0 and higher anymore. Add DPU_PINGPONG_DSC to PINGPONG_SDM845_MASK, PINGPONG_SDM845_TE2_MASK and PINGPONG_SM8150_MASK which is used for all DPU < 7.0 chipsets. changes in v6: -- split patches and rearrange to keep catalog related files at this patch changes in v9: -- delete add BIT(DPU_PINGPONG_DSC) to PINGPONG_SDM845_TE2_MASK changes in v7: -- rewording commit text as suggested at review comments Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> --- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 4 ++-- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 4 +++- 2 files changed, 5 insertions(+), 3 deletions(-)