| Message ID | 20230517074830.569398-2-arnaud.pouliquen@foss.st.com |
|---|---|
| State | Accepted |
| Commit | 9c994fcf52284ac4cdeee1633373d69e05e30b23 |
| Headers | show |
| Series | [v4,1/2] ARM: dts: stm32: Update Cortex-M4 reset declarations on stm32mp15 | expand |
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 664825418c32..a98ae58e2c1c 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -1823,8 +1823,8 @@ m4_rproc: m4@10000000 { <0x30000000 0x40000>, <0x38000000 0x10000>; resets = <&rcc MCU_R>; + reset-names = "mcu_rst"; st,syscfg-holdboot = <&rcc 0x10C 0x1>; - st,syscfg-tz = <&rcc 0x000 0x1>; st,syscfg-pdds = <&pwr_mcu 0x0 0x1>; st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>; st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
Since the introduction of the SCMI for the management of the MCU hold boot in OP-TEE, management of the hold boot by SMC call is deprecated. - Clean the st,syscfg-tz which allows to determine if the trust zone is enable. - Add reset-names properties to be able to differentiate the MCU reset and the MCU HOLD BOOT. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> --- Deltas vs previous revision: - update commit subject to specify the SoC series --- arch/arm/boot/dts/stm32mp151.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)