diff mbox series

[v7,11/11] arm64: dts: qcom: sm8450: add crypto nodes

Message ID 20230519214813.2593271-12-bhupesh.sharma@linaro.org
State New
Headers show
Series arm64: qcom: Enable Crypto Engine for a few Qualcomm SoCs | expand

Commit Message

Bhupesh Sharma May 19, 2023, 9:48 p.m. UTC
From: Neil Armstrong <neil.armstrong@linaro.org>

Add crypto engine (CE) and CE BAM related nodes and definitions
for the SM8450 SoC.

Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
[Bhupesh: Corrected the compatible list]
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 595533aeafc4..1c65f7dc67f2 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -4138,6 +4138,34 @@  ufs_mem_phy_lanes: phy@1d87400 {
 			};
 		};
 
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0 0x01dc4000 0 0x28000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			iommus = <&apps_smmu 0x584 0x11>,
+				 <&apps_smmu 0x588 0x0>,
+				 <&apps_smmu 0x598 0x5>,
+				 <&apps_smmu 0x59a 0x0>,
+				 <&apps_smmu 0x59f 0x0>;
+		};
+
+		crypto: crypto@1de0000 {
+			compatible = "qcom,sm8450-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0 0x01dfa000 0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x584 0x11>,
+				 <&apps_smmu 0x588 0x0>,
+				 <&apps_smmu 0x598 0x5>,
+				 <&apps_smmu 0x59a 0x0>,
+				 <&apps_smmu 0x59f 0x0>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "memory";
+		};
+
 		sdhc_2: mmc@8804000 {
 			compatible = "qcom,sm8450-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0 0x08804000 0 0x1000>;