diff mbox series

[v5,7/8] iio: cdc: ad7150: relax return value check for IRQ get

Message ID 73c633ccab80bdfaa1adf6ae099cfc9d365be6a2.1684493615.git.mazziesaccount@gmail.com
State New
Headers show
Series fix fwnode_irq_get[_byname()] returnvalue | expand

Commit Message

Matti Vaittinen May 19, 2023, 11:04 a.m. UTC
fwnode_irq_get[_byname]() were changed to not return 0 anymore. The
special error case where device-tree based IRQ mapping fails can't no
longer be reliably detected from this return value. This yields a
functional change in the driver where the mapping failure is treated as
an error.

The mapping failure can occur for example when the device-tree IRQ
information translation call-back(s) (xlate) fail, IRQ domain is not
found, IRQ type conflicts, etc. In most cases this indicates an error in
the device-tree and special handling is not really required.

One more thing to note is that ACPI APIs do not return zero for any
failures so this special handling did only apply on device-tree based
systems.

Drop the special handling for DT mapping failures as these can no longer
be separated from other errors at driver side.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>

---

Please note that I don't have the hardware to test this change.
Furthermore, testing this type of device-tree error cases is not
trivial, as the question we probably dive in is "what happens with the
existing users who have errors in the device-tree". Answering to this
question is not simple.

I did this patch with minimal code changes - but a question is if we
should really jump into the else branch below on all IRQ getting errors?

        } else {
                indio_dev->info = &ad7150_info_no_irq;
                switch (id->driver_data) {
                case AD7150:
                        indio_dev->channels = ad7150_channels_no_irq;
                        indio_dev->num_channels =
                                ARRAY_SIZE(ad7150_channels_no_irq);
                        break;
                case AD7151:
                        indio_dev->channels = ad7151_channels_no_irq;
                        indio_dev->num_channels =
                                ARRAY_SIZE(ad7151_channels_no_irq);
                        break;
                default:
                        return -EINVAL;
                }

Why do we have special handling for !chip->interrupts[0] while other
errors on getting the fwnode_irq_get(dev_fwnode(&client->dev), 0); will
abort the probe?

The first patch of the series changes the fwnode_irq_get() so this depends
on the first patch of the series and should not be applied alone.
---
 drivers/iio/cdc/ad7150.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/iio/cdc/ad7150.c b/drivers/iio/cdc/ad7150.c
index 79aeb0aaea67..d7ba50b9780d 100644
--- a/drivers/iio/cdc/ad7150.c
+++ b/drivers/iio/cdc/ad7150.c
@@ -567,8 +567,7 @@  static int ad7150_probe(struct i2c_client *client)
 		if (chip->interrupts[1] < 0)
 			return chip->interrupts[1];
 	}
-	if (chip->interrupts[0] &&
-	    (id->driver_data == AD7151 || chip->interrupts[1])) {
+	if (id->driver_data == AD7151 || chip->interrupts[1]) {
 		irq_set_status_flags(chip->interrupts[0], IRQ_NOAUTOEN);
 		ret = devm_request_threaded_irq(&client->dev,
 						chip->interrupts[0],