diff mbox series

[02/15] phy: qualcomm: add QMP HDMI PHY driver

Message ID 20230523121454.3460634-3-dmitry.baryshkov@linaro.org
State Superseded
Headers show
Series drm/msm/hdmi & phy: use generic PHY framework | expand

Commit Message

Dmitry Baryshkov May 23, 2023, 12:14 p.m. UTC
Port Qualcomm QMP HDMI PHY to the generic PHY framework. Split the
generic part and the msm8996 part. When adding support for msm8992/4 and
msm8998 (which also employ QMP for HDMI PHY), one will have to provide
the PLL programming part only.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/phy/qualcomm/Kconfig                  |   7 +
 drivers/phy/qualcomm/Makefile                 |   5 +
 drivers/phy/qualcomm/phy-qcom-qmp-hdmi-base.c | 184 ++++++++
 .../phy/qualcomm/phy-qcom-qmp-hdmi-msm8996.c  | 441 ++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp-hdmi.h      |  75 +++
 5 files changed, 712 insertions(+)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-hdmi-base.c
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-hdmi-msm8996.c
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-hdmi.h

Comments

Vinod Koul July 11, 2023, 7:23 a.m. UTC | #1
On 23-05-23, 15:14, Dmitry Baryshkov wrote:
> Port Qualcomm QMP HDMI PHY to the generic PHY framework. Split the
> generic part and the msm8996 part. When adding support for msm8992/4 and
> msm8998 (which also employ QMP for HDMI PHY), one will have to provide
> the PLL programming part only.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  drivers/phy/qualcomm/Kconfig                  |   7 +
>  drivers/phy/qualcomm/Makefile                 |   5 +
>  drivers/phy/qualcomm/phy-qcom-qmp-hdmi-base.c | 184 ++++++++
>  .../phy/qualcomm/phy-qcom-qmp-hdmi-msm8996.c  | 441 ++++++++++++++++++
>  drivers/phy/qualcomm/phy-qcom-qmp-hdmi.h      |  75 +++
>  5 files changed, 712 insertions(+)
>  create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-hdmi-base.c
>  create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-hdmi-msm8996.c
>  create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-hdmi.h
> 
> diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
> index 4850d48f31fa..94fb5679df4a 100644
> --- a/drivers/phy/qualcomm/Kconfig
> +++ b/drivers/phy/qualcomm/Kconfig
> @@ -65,6 +65,13 @@ config PHY_QCOM_QMP_COMBO
>  	  Enable this to support the QMP Combo PHY transceiver that is used
>  	  with USB3 and DisplayPort controllers on Qualcomm chips.
>  
> +config PHY_QCOM_QMP_HDMI
> +	tristate "Qualcomm QMP HDMI PHY Driver"
> +	default PHY_QCOM_QMP && DRM_MSM_HDMI
> +	help
> +	  Enable this to support the QMP HDMI PHY transceiver that is used
> +	  with HDMI output on Qualcomm MSM8996 chips.
> +
>  config PHY_QCOM_QMP_PCIE
>  	tristate "Qualcomm QMP PCIe PHY Driver"
>  	depends on PCI || COMPILE_TEST
> diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile
> index de3dc9ccf067..b877d86ea0b1 100644
> --- a/drivers/phy/qualcomm/Makefile
> +++ b/drivers/phy/qualcomm/Makefile
> @@ -6,7 +6,12 @@ obj-$(CONFIG_PHY_QCOM_IPQ4019_USB)	+= phy-qcom-ipq4019-usb.o
>  obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
>  obj-$(CONFIG_PHY_QCOM_PCIE2)		+= phy-qcom-pcie2.o
>  
> +phy-qcom-qmp-hdmi-y := \
> +	phy-qcom-qmp-hdmi-base.o \
> +	phy-qcom-qmp-hdmi-msm8996.o \
> +
>  obj-$(CONFIG_PHY_QCOM_QMP_COMBO)	+= phy-qcom-qmp-combo.o
> +obj-$(CONFIG_PHY_QCOM_QMP_HDMI)		+= phy-qcom-qmp-hdmi.o
>  obj-$(CONFIG_PHY_QCOM_QMP_PCIE)		+= phy-qcom-qmp-pcie.o
>  obj-$(CONFIG_PHY_QCOM_QMP_PCIE_8996)	+= phy-qcom-qmp-pcie-msm8996.o
>  obj-$(CONFIG_PHY_QCOM_QMP_UFS)		+= phy-qcom-qmp-ufs.o
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-hdmi-base.c b/drivers/phy/qualcomm/phy-qcom-qmp-hdmi-base.c
> new file mode 100644
> index 000000000000..08132b3f82af
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-hdmi-base.c
> @@ -0,0 +1,184 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2016, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2023, Linaro Ltd.
> + */
> +
> +#include <linux/of_device.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +
> +#include "phy-qcom-qmp-hdmi.h"
> +
> +int qmp_hdmi_phy_init(struct phy *phy)
> +{
> +	struct qmp_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);
> +
> +	return pm_runtime_resume_and_get(hdmi_phy->dev);
> +}
> +
> +int qmp_hdmi_phy_configure(struct phy *phy, union phy_configure_opts *opts)
> +{
> +        const struct phy_configure_opts_hdmi *hdmi_opts = &opts->hdmi;
> +	struct qmp_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);

wrong alignment

> +        int ret = 0;
> +
> +        memcpy(&hdmi_phy->hdmi_opts, hdmi_opts, sizeof(*hdmi_opts));
> +
> +        return ret;

drop ret, and return 0 here?

> +}
> +
> +int qmp_hdmi_phy_exit(struct phy *phy)
> +{
> +	struct qmp_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);
> +
> +	pm_runtime_put_noidle(hdmi_phy->dev);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused qmp_hdmi_runtime_resume(struct device *dev)
> +{
> +	struct qmp_hdmi_phy *hdmi_phy = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = regulator_bulk_enable(ARRAY_SIZE(hdmi_phy->supplies), hdmi_phy->supplies);
> +	if (ret)
> +		return ret;
> +
> +	ret = clk_bulk_prepare_enable(ARRAY_SIZE(hdmi_phy->clks), hdmi_phy->clks);
> +	if (ret)
> +		goto out_disable_supplies;
> +
> +	return 0;
> +
> +out_disable_supplies:
> +	regulator_bulk_disable(ARRAY_SIZE(hdmi_phy->supplies), hdmi_phy->supplies);
> +
> +	return ret;
> +}
> +
> +static int __maybe_unused qmp_hdmi_runtime_suspend(struct device *dev)
> +{
> +	struct qmp_hdmi_phy *hdmi_phy = dev_get_drvdata(dev);
> +
> +	clk_bulk_disable_unprepare(ARRAY_SIZE(hdmi_phy->clks), hdmi_phy->clks);
> +	regulator_bulk_disable(ARRAY_SIZE(hdmi_phy->supplies), hdmi_phy->supplies);
> +
> +	return 0;
> +}
> +
> +static int qmp_hdmi_probe(struct platform_device *pdev)
> +{
> +	struct clk_init_data init = {
> +		.name = "hdmipll",
> +		.parent_data = (const struct clk_parent_data[]) {
> +			{ .fw_name = "xo", .name = "xo_board" },
> +		},
> +		.flags = CLK_GET_RATE_NOCACHE,
> +		.num_parents = 1,
> +	};
> +	const struct qmp_hdmi_cfg *cfg = of_device_get_match_data(&pdev->dev);
> +	struct phy_provider *phy_provider;
> +	struct device *dev = &pdev->dev;
> +	struct qmp_hdmi_phy *hdmi_phy;
> +	int ret, i;
> +
> +	hdmi_phy = devm_kzalloc(dev, sizeof(*hdmi_phy), GFP_KERNEL);
> +	if (!hdmi_phy)
> +		return -ENOMEM;
> +
> +	hdmi_phy->dev = dev;
> +
> +	hdmi_phy->serdes = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(hdmi_phy->serdes))
> +		return PTR_ERR(hdmi_phy->serdes);
> +
> +	for (i = 0; i < HDMI_NUM_TX_CHANNEL; i++) {
> +		hdmi_phy->tx[i] = devm_platform_ioremap_resource(pdev, 1 + i);
> +		if (IS_ERR(hdmi_phy->tx[i]))
> +			return PTR_ERR(hdmi_phy->tx[i]);
> +	}
> +
> +	hdmi_phy->phy_reg = devm_platform_ioremap_resource(pdev, 5);
> +	if (IS_ERR(hdmi_phy->phy_reg))
> +		return PTR_ERR(hdmi_phy->phy_reg);
> +
> +	hdmi_phy->clks[0].id = "iface";
> +	hdmi_phy->clks[1].id = "ref";
> +	ret = devm_clk_bulk_get(dev, ARRAY_SIZE(hdmi_phy->clks), hdmi_phy->clks);
> +	if (ret)
> +		return ret;
> +
> +	hdmi_phy->supplies[0].supply = "vddio";
> +	hdmi_phy->supplies[0].init_load_uA = 100000;
> +	hdmi_phy->supplies[1].supply = "vcca";
> +	hdmi_phy->supplies[1].init_load_uA = 10000;
> +	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(hdmi_phy->supplies), hdmi_phy->supplies);
> +	if (ret)
> +		return ret;
> +
> +	platform_set_drvdata(pdev, hdmi_phy);
> +
> +	ret = devm_pm_runtime_enable(&pdev->dev);
> +	if (ret)
> +		return ret;
> +
> +	ret = pm_runtime_resume_and_get(&pdev->dev);
> +	if (ret)
> +		return ret;
> +
> +	init.ops = cfg->pll_ops;
> +	hdmi_phy->pll_hw.init = &init;
> +	ret = devm_clk_hw_register(hdmi_phy->dev, &hdmi_phy->pll_hw);
> +	if (ret)
> +		goto err;
> +
> +	ret = devm_of_clk_add_hw_provider(hdmi_phy->dev, of_clk_hw_simple_get, &hdmi_phy->pll_hw);
> +	if (ret)
> +		goto err;
> +
> +	hdmi_phy->phy = devm_phy_create(dev, pdev->dev.of_node, cfg->phy_ops);
> +	if (IS_ERR(hdmi_phy->phy)) {
> +		ret = PTR_ERR(hdmi_phy->phy);
> +		goto err;
> +	}
> +
> +	phy_set_drvdata(hdmi_phy->phy, hdmi_phy);
> +
> +	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +	pm_runtime_put_noidle(&pdev->dev);
> +	return PTR_ERR_OR_ZERO(phy_provider);
> +
> +err:
> +	pm_runtime_put_noidle(&pdev->dev);
> +	return ret;
> +}
> +
> +static const struct of_device_id qmp_hdmi_of_match_table[] = {
> +	{
> +		.compatible = "qcom,hdmi-phy-8996", .data = &qmp_hdmi_8996_cfg,
> +	},
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, qmp_hdmi_of_match_table);
> +
> +DEFINE_RUNTIME_DEV_PM_OPS(qmp_hdmi_pm_ops,
> +			  qmp_hdmi_runtime_suspend,
> +			  qmp_hdmi_runtime_resume,
> +			  NULL);
> +
> +static struct platform_driver qmp_hdmi_driver = {
> +	.probe		= qmp_hdmi_probe,
> +	.driver = {
> +		.name	= "qcom-qmp-hdmi-phy",
> +		.of_match_table = qmp_hdmi_of_match_table,
> +		.pm     = &qmp_hdmi_pm_ops,
> +	},
> +};
> +
> +module_platform_driver(qmp_hdmi_driver);
> +
> +MODULE_AUTHOR("Dmitry Baryshkov <dmitry.baryshkov@linaro.org>");
> +MODULE_DESCRIPTION("Qualcomm QMP HDMI PHY driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-hdmi-msm8996.c b/drivers/phy/qualcomm/phy-qcom-qmp-hdmi-msm8996.c
> new file mode 100644
> index 000000000000..27ffa70d0faa
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-hdmi-msm8996.c
> @@ -0,0 +1,441 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2016, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2023, Linaro Ltd.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/iopoll.h>
> +#include <linux/phy/phy.h>
> +
> +#include "phy-qcom-qmp-hdmi.h"
> +#include "phy-qcom-qmp-qserdes-com.h"
> +#include "phy-qcom-qmp-qserdes-txrx.h"
> +
> +#define HDMI_VCO_MAX_FREQ			12000000000UL
> +#define HDMI_VCO_MIN_FREQ			8000000000UL

I prefer using 12 * GIGA etc to define these

> +static int qmp_hdmi_8996_phy_set_rate(struct qmp_hdmi_phy *hdmi_phy)
> +{
> +	unsigned long parent_rate = HDMI_DEFAULT_REF_CLOCK;
> +	unsigned long rate = hdmi_phy->hdmi_opts.pixel_clk_rate * 1000;
> +	struct qmp_hdmi_8996_post_divider pd;
> +	bool gen_ssc = false;
> +	u64 bclk;
> +	u64 dec_start;
> +	u64 frac_start;
> +	u64 fdata;
> +	u32 pll_divisor;
> +	u32 rem;
> +	u32 integloop_gain;
> +	u32 pll_cmp;
> +	int i, ret;
> +
> +	bclk = ((u64)rate) * 10;
> +	ret = qmp_hdmi_8996_pll_get_post_div(&pd, bclk);
> +	if (ret) {
> +		dev_err(hdmi_phy->dev, "PLL calculation failed\n");
> +		return ret;
> +	}
> +
> +	dec_start = pd.vco_freq;
> +	pll_divisor = 4 * parent_rate;
> +	do_div(dec_start, pll_divisor);
> +
> +	frac_start = pd.vco_freq * (1 << 20);
> +
> +	rem = do_div(frac_start, pll_divisor);
> +	frac_start -= dec_start * (1 << 20);
> +	if (rem > (pll_divisor >> 1))
> +		frac_start++;
> +
> +	fdata = pd.vco_freq;
> +	do_div(fdata, pd.vco_ratio);
> +
> +	pll_cmp = qmp_hdmi_8996_pll_get_pll_cmp(fdata, parent_rate);
> +
> +	/* Initially shut down PHY */
> +	dev_dbg(hdmi_phy->dev, "Disabling PHY");
> +	hdmi_phy_write(hdmi_phy, REG_HDMI_8996_PHY_PD_CTL, 0x0);
> +	udelay(500);
> +
> +	/* Power up sequence */
> +	hdmi_pll_write(hdmi_phy, QSERDES_COM_BG_CTRL, 0x04);
> +
> +	hdmi_phy_write(hdmi_phy, REG_HDMI_8996_PHY_PD_CTL, 0x1);
> +	hdmi_pll_write(hdmi_phy, QSERDES_COM_RESETSM_CNTRL, 0x20);
> +	hdmi_phy_write(hdmi_phy, REG_HDMI_8996_PHY_TX0_TX1_LANE_CTL, 0x0f);
> +	hdmi_phy_write(hdmi_phy, REG_HDMI_8996_PHY_TX2_TX3_LANE_CTL, 0x0f);
> +
> +	hdmi_tx_chan_write(hdmi_phy, 0, QSERDES_TX_LANE_MODE, 0x43);
> +	hdmi_tx_chan_write(hdmi_phy, 2, QSERDES_TX_LANE_MODE, 0x43);
> +
> +	hdmi_pll_write(hdmi_phy, QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1e);
> +	hdmi_pll_write(hdmi_phy, QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x07);
> +	hdmi_pll_write(hdmi_phy, QSERDES_COM_SYSCLK_EN_SEL, 0x37);
> +	hdmi_pll_write(hdmi_phy, QSERDES_COM_SYS_CLK_CTRL, 0x02);
> +	hdmi_pll_write(hdmi_phy, QSERDES_COM_CLK_ENABLE1, 0x0e);
> +
> +	if (frac_start != 0 || gen_ssc) {
> +		hdmi_pll_write(hdmi_phy, QSERDES_COM_PLL_CCTRL_MODE0, 0x28);
> +		hdmi_pll_write(hdmi_phy, QSERDES_COM_PLL_RCTRL_MODE0, 0x16);
> +		hdmi_pll_write(hdmi_phy, QSERDES_COM_CP_CTRL_MODE0,
> +			       11000000 / (parent_rate/ 20));
> +		integloop_gain = (64 * parent_rate) / HDMI_DEFAULT_REF_CLOCK;
> +	} else {
> +		hdmi_pll_write(hdmi_phy, QSERDES_COM_PLL_CCTRL_MODE0, 0x01);
> +		hdmi_pll_write(hdmi_phy, QSERDES_COM_PLL_RCTRL_MODE0, 0x10);
> +		hdmi_pll_write(hdmi_phy, QSERDES_COM_CP_CTRL_MODE0, 0x23);
> +		integloop_gain = (1022 * parent_rate) / (100 * 1000 * 1000);
> +	}
> +
> +	/* Bypass VCO calibration */
> +	if (bclk > HDMI_DIG_FREQ_BIT_CLK_THRESHOLD) {
> +		hdmi_pll_write(hdmi_phy, QSERDES_COM_SVS_MODE_CLK_SEL, 1);
> +		integloop_gain <<= 1;
> +	} else {
> +		hdmi_pll_write(hdmi_phy, QSERDES_COM_SVS_MODE_CLK_SEL, 2);
> +		integloop_gain <<= 2;
> +	}
> +
> +	integloop_gain = min_t(u32, integloop_gain, 2046);
> +
> +	hdmi_pll_write(hdmi_phy, QSERDES_COM_BG_TRIM, 0x0f);
> +	hdmi_pll_write(hdmi_phy, QSERDES_COM_PLL_IVCO, 0x0f);
> +	hdmi_pll_write(hdmi_phy, QSERDES_COM_VCO_TUNE_CTRL, 0);
> +
> +	hdmi_pll_write(hdmi_phy, QSERDES_COM_BG_CTRL, 0x06);
> +
> +	hdmi_pll_write(hdmi_phy, QSERDES_COM_CLK_SELECT, 0x30);
> +	hdmi_pll_write(hdmi_phy, QSERDES_COM_HSCLK_SEL, 0x20 | pd.hsclk_divsel);
> +	hdmi_pll_write(hdmi_phy, QSERDES_COM_LOCK_CMP_EN, 0x0);
> +
> +	hdmi_pll_write(hdmi_phy, QSERDES_COM_DEC_START_MODE0, dec_start);
> +	hdmi_pll_write(hdmi_phy, QSERDES_COM_DIV_FRAC_START1_MODE0,
> +		       frac_start & 0xff);
> +	hdmi_pll_write(hdmi_phy, QSERDES_COM_DIV_FRAC_START2_MODE0,
> +		       (frac_start >> 8) & 0xff);
> +	hdmi_pll_write(hdmi_phy, QSERDES_COM_DIV_FRAC_START3_MODE0,
> +		       (frac_start >> 16) & 0xf);

FIELD_{PREP|GET} please

> +static int qmp_hdmi_8996_phy_power_on(struct phy *phy)
> +{
> +	struct qmp_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);
> +	u32 status;
> +	int i, ret = 0;

superfluous init for ret
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
index 4850d48f31fa..94fb5679df4a 100644
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
@@ -65,6 +65,13 @@  config PHY_QCOM_QMP_COMBO
 	  Enable this to support the QMP Combo PHY transceiver that is used
 	  with USB3 and DisplayPort controllers on Qualcomm chips.
 
+config PHY_QCOM_QMP_HDMI
+	tristate "Qualcomm QMP HDMI PHY Driver"
+	default PHY_QCOM_QMP && DRM_MSM_HDMI
+	help
+	  Enable this to support the QMP HDMI PHY transceiver that is used
+	  with HDMI output on Qualcomm MSM8996 chips.
+
 config PHY_QCOM_QMP_PCIE
 	tristate "Qualcomm QMP PCIe PHY Driver"
 	depends on PCI || COMPILE_TEST
diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile
index de3dc9ccf067..b877d86ea0b1 100644
--- a/drivers/phy/qualcomm/Makefile
+++ b/drivers/phy/qualcomm/Makefile
@@ -6,7 +6,12 @@  obj-$(CONFIG_PHY_QCOM_IPQ4019_USB)	+= phy-qcom-ipq4019-usb.o
 obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
 obj-$(CONFIG_PHY_QCOM_PCIE2)		+= phy-qcom-pcie2.o
 
+phy-qcom-qmp-hdmi-y := \
+	phy-qcom-qmp-hdmi-base.o \
+	phy-qcom-qmp-hdmi-msm8996.o \
+
 obj-$(CONFIG_PHY_QCOM_QMP_COMBO)	+= phy-qcom-qmp-combo.o
+obj-$(CONFIG_PHY_QCOM_QMP_HDMI)		+= phy-qcom-qmp-hdmi.o
 obj-$(CONFIG_PHY_QCOM_QMP_PCIE)		+= phy-qcom-qmp-pcie.o
 obj-$(CONFIG_PHY_QCOM_QMP_PCIE_8996)	+= phy-qcom-qmp-pcie-msm8996.o
 obj-$(CONFIG_PHY_QCOM_QMP_UFS)		+= phy-qcom-qmp-ufs.o
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-hdmi-base.c b/drivers/phy/qualcomm/phy-qcom-qmp-hdmi-base.c
new file mode 100644
index 000000000000..08132b3f82af
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-hdmi-base.c
@@ -0,0 +1,184 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Linaro Ltd.
+ */
+
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#include "phy-qcom-qmp-hdmi.h"
+
+int qmp_hdmi_phy_init(struct phy *phy)
+{
+	struct qmp_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);
+
+	return pm_runtime_resume_and_get(hdmi_phy->dev);
+}
+
+int qmp_hdmi_phy_configure(struct phy *phy, union phy_configure_opts *opts)
+{
+        const struct phy_configure_opts_hdmi *hdmi_opts = &opts->hdmi;
+	struct qmp_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);
+        int ret = 0;
+
+        memcpy(&hdmi_phy->hdmi_opts, hdmi_opts, sizeof(*hdmi_opts));
+
+        return ret;
+}
+
+int qmp_hdmi_phy_exit(struct phy *phy)
+{
+	struct qmp_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);
+
+	pm_runtime_put_noidle(hdmi_phy->dev);
+
+	return 0;
+}
+
+static int __maybe_unused qmp_hdmi_runtime_resume(struct device *dev)
+{
+	struct qmp_hdmi_phy *hdmi_phy = dev_get_drvdata(dev);
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(hdmi_phy->supplies), hdmi_phy->supplies);
+	if (ret)
+		return ret;
+
+	ret = clk_bulk_prepare_enable(ARRAY_SIZE(hdmi_phy->clks), hdmi_phy->clks);
+	if (ret)
+		goto out_disable_supplies;
+
+	return 0;
+
+out_disable_supplies:
+	regulator_bulk_disable(ARRAY_SIZE(hdmi_phy->supplies), hdmi_phy->supplies);
+
+	return ret;
+}
+
+static int __maybe_unused qmp_hdmi_runtime_suspend(struct device *dev)
+{
+	struct qmp_hdmi_phy *hdmi_phy = dev_get_drvdata(dev);
+
+	clk_bulk_disable_unprepare(ARRAY_SIZE(hdmi_phy->clks), hdmi_phy->clks);
+	regulator_bulk_disable(ARRAY_SIZE(hdmi_phy->supplies), hdmi_phy->supplies);
+
+	return 0;
+}
+
+static int qmp_hdmi_probe(struct platform_device *pdev)
+{
+	struct clk_init_data init = {
+		.name = "hdmipll",
+		.parent_data = (const struct clk_parent_data[]) {
+			{ .fw_name = "xo", .name = "xo_board" },
+		},
+		.flags = CLK_GET_RATE_NOCACHE,
+		.num_parents = 1,
+	};
+	const struct qmp_hdmi_cfg *cfg = of_device_get_match_data(&pdev->dev);
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct qmp_hdmi_phy *hdmi_phy;
+	int ret, i;
+
+	hdmi_phy = devm_kzalloc(dev, sizeof(*hdmi_phy), GFP_KERNEL);
+	if (!hdmi_phy)
+		return -ENOMEM;
+
+	hdmi_phy->dev = dev;
+
+	hdmi_phy->serdes = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(hdmi_phy->serdes))
+		return PTR_ERR(hdmi_phy->serdes);
+
+	for (i = 0; i < HDMI_NUM_TX_CHANNEL; i++) {
+		hdmi_phy->tx[i] = devm_platform_ioremap_resource(pdev, 1 + i);
+		if (IS_ERR(hdmi_phy->tx[i]))
+			return PTR_ERR(hdmi_phy->tx[i]);
+	}
+
+	hdmi_phy->phy_reg = devm_platform_ioremap_resource(pdev, 5);
+	if (IS_ERR(hdmi_phy->phy_reg))
+		return PTR_ERR(hdmi_phy->phy_reg);
+
+	hdmi_phy->clks[0].id = "iface";
+	hdmi_phy->clks[1].id = "ref";
+	ret = devm_clk_bulk_get(dev, ARRAY_SIZE(hdmi_phy->clks), hdmi_phy->clks);
+	if (ret)
+		return ret;
+
+	hdmi_phy->supplies[0].supply = "vddio";
+	hdmi_phy->supplies[0].init_load_uA = 100000;
+	hdmi_phy->supplies[1].supply = "vcca";
+	hdmi_phy->supplies[1].init_load_uA = 10000;
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(hdmi_phy->supplies), hdmi_phy->supplies);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, hdmi_phy);
+
+	ret = devm_pm_runtime_enable(&pdev->dev);
+	if (ret)
+		return ret;
+
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret)
+		return ret;
+
+	init.ops = cfg->pll_ops;
+	hdmi_phy->pll_hw.init = &init;
+	ret = devm_clk_hw_register(hdmi_phy->dev, &hdmi_phy->pll_hw);
+	if (ret)
+		goto err;
+
+	ret = devm_of_clk_add_hw_provider(hdmi_phy->dev, of_clk_hw_simple_get, &hdmi_phy->pll_hw);
+	if (ret)
+		goto err;
+
+	hdmi_phy->phy = devm_phy_create(dev, pdev->dev.of_node, cfg->phy_ops);
+	if (IS_ERR(hdmi_phy->phy)) {
+		ret = PTR_ERR(hdmi_phy->phy);
+		goto err;
+	}
+
+	phy_set_drvdata(hdmi_phy->phy, hdmi_phy);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	pm_runtime_put_noidle(&pdev->dev);
+	return PTR_ERR_OR_ZERO(phy_provider);
+
+err:
+	pm_runtime_put_noidle(&pdev->dev);
+	return ret;
+}
+
+static const struct of_device_id qmp_hdmi_of_match_table[] = {
+	{
+		.compatible = "qcom,hdmi-phy-8996", .data = &qmp_hdmi_8996_cfg,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, qmp_hdmi_of_match_table);
+
+DEFINE_RUNTIME_DEV_PM_OPS(qmp_hdmi_pm_ops,
+			  qmp_hdmi_runtime_suspend,
+			  qmp_hdmi_runtime_resume,
+			  NULL);
+
+static struct platform_driver qmp_hdmi_driver = {
+	.probe		= qmp_hdmi_probe,
+	.driver = {
+		.name	= "qcom-qmp-hdmi-phy",
+		.of_match_table = qmp_hdmi_of_match_table,
+		.pm     = &qmp_hdmi_pm_ops,
+	},
+};
+
+module_platform_driver(qmp_hdmi_driver);
+
+MODULE_AUTHOR("Dmitry Baryshkov <dmitry.baryshkov@linaro.org>");
+MODULE_DESCRIPTION("Qualcomm QMP HDMI PHY driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-hdmi-msm8996.c b/drivers/phy/qualcomm/phy-qcom-qmp-hdmi-msm8996.c
new file mode 100644
index 000000000000..27ffa70d0faa
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-hdmi-msm8996.c
@@ -0,0 +1,441 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Linaro Ltd.
+ */
+
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/phy/phy.h>
+
+#include "phy-qcom-qmp-hdmi.h"
+#include "phy-qcom-qmp-qserdes-com.h"
+#include "phy-qcom-qmp-qserdes-txrx.h"
+
+#define HDMI_VCO_MAX_FREQ			12000000000UL
+#define HDMI_VCO_MIN_FREQ			8000000000UL
+
+#define HDMI_PCLK_MAX_FREQ			600000000UL
+#define HDMI_PCLK_MIN_FREQ			25000000UL
+
+#define HDMI_HIGH_FREQ_BIT_CLK_THRESHOLD	3400000000UL
+#define HDMI_DIG_FREQ_BIT_CLK_THRESHOLD		1500000000UL
+#define HDMI_MID_FREQ_BIT_CLK_THRESHOLD		750000000UL
+#define HDMI_DEFAULT_REF_CLOCK			19200000
+#define HDMI_PLL_CMP_CNT			1024
+
+#define HDMI_PLL_POLL_MAX_READS			100
+#define HDMI_PLL_POLL_TIMEOUT_US		150
+
+#define REG_HDMI_8996_PHY_CFG					0x00000000
+#define REG_HDMI_8996_PHY_PD_CTL				0x00000004
+#define REG_HDMI_8996_PHY_MODE					0x00000008
+#define REG_HDMI_8996_PHY_MISR_CLEAR				0x0000000c
+#define REG_HDMI_8996_PHY_TX0_TX1_BIST_CFG0			0x00000010
+#define REG_HDMI_8996_PHY_TX0_TX1_BIST_CFG1			0x00000014
+#define REG_HDMI_8996_PHY_TX0_TX1_PRBS_SEED_BYTE0		0x00000018
+#define REG_HDMI_8996_PHY_TX0_TX1_PRBS_SEED_BYTE1		0x0000001c
+#define REG_HDMI_8996_PHY_TX0_TX1_BIST_PATTERN0			0x00000020
+#define REG_HDMI_8996_PHY_TX0_TX1_BIST_PATTERN1			0x00000024
+#define REG_HDMI_8996_PHY_TX2_TX3_BIST_CFG0			0x00000028
+#define REG_HDMI_8996_PHY_TX2_TX3_BIST_CFG1			0x0000002c
+#define REG_HDMI_8996_PHY_TX2_TX3_PRBS_SEED_BYTE0		0x00000030
+#define REG_HDMI_8996_PHY_TX2_TX3_PRBS_SEED_BYTE1		0x00000034
+#define REG_HDMI_8996_PHY_TX2_TX3_BIST_PATTERN0			0x00000038
+#define REG_HDMI_8996_PHY_TX2_TX3_BIST_PATTERN1			0x0000003c
+#define REG_HDMI_8996_PHY_DEBUG_BUS_SEL				0x00000040
+#define REG_HDMI_8996_PHY_TXCAL_CFG0				0x00000044
+#define REG_HDMI_8996_PHY_TXCAL_CFG1				0x00000048
+#define REG_HDMI_8996_PHY_TX0_TX1_LANE_CTL			0x0000004c
+#define REG_HDMI_8996_PHY_TX2_TX3_LANE_CTL			0x00000050
+#define REG_HDMI_8996_PHY_LANE_BIST_CONFIG			0x00000054
+#define REG_HDMI_8996_PHY_CLOCK					0x00000058
+#define REG_HDMI_8996_PHY_MISC1					0x0000005c
+#define REG_HDMI_8996_PHY_MISC2					0x00000060
+#define REG_HDMI_8996_PHY_TX0_TX1_BIST_STATUS0			0x00000064
+#define REG_HDMI_8996_PHY_TX0_TX1_BIST_STATUS1			0x00000068
+#define REG_HDMI_8996_PHY_TX0_TX1_BIST_STATUS2			0x0000006c
+#define REG_HDMI_8996_PHY_TX2_TX3_BIST_STATUS0			0x00000070
+#define REG_HDMI_8996_PHY_TX2_TX3_BIST_STATUS1			0x00000074
+#define REG_HDMI_8996_PHY_TX2_TX3_BIST_STATUS2			0x00000078
+#define REG_HDMI_8996_PHY_PRE_MISR_STATUS0			0x0000007c
+#define REG_HDMI_8996_PHY_PRE_MISR_STATUS1			0x00000080
+#define REG_HDMI_8996_PHY_PRE_MISR_STATUS2			0x00000084
+#define REG_HDMI_8996_PHY_PRE_MISR_STATUS3			0x00000088
+#define REG_HDMI_8996_PHY_POST_MISR_STATUS0			0x0000008c
+#define REG_HDMI_8996_PHY_POST_MISR_STATUS1			0x00000090
+#define REG_HDMI_8996_PHY_POST_MISR_STATUS2			0x00000094
+#define REG_HDMI_8996_PHY_POST_MISR_STATUS3			0x00000098
+#define REG_HDMI_8996_PHY_STATUS				0x0000009c
+#define REG_HDMI_8996_PHY_MISC3_STATUS				0x000000a0
+#define REG_HDMI_8996_PHY_MISC4_STATUS				0x000000a4
+#define REG_HDMI_8996_PHY_DEBUG_BUS0				0x000000a8
+#define REG_HDMI_8996_PHY_DEBUG_BUS1				0x000000ac
+#define REG_HDMI_8996_PHY_DEBUG_BUS2				0x000000b0
+#define REG_HDMI_8996_PHY_DEBUG_BUS3				0x000000b4
+#define REG_HDMI_8996_PHY_PHY_REVISION_ID0			0x000000b8
+#define REG_HDMI_8996_PHY_PHY_REVISION_ID1			0x000000bc
+#define REG_HDMI_8996_PHY_PHY_REVISION_ID2			0x000000c0
+#define REG_HDMI_8996_PHY_PHY_REVISION_ID3			0x000000c4
+
+struct qmp_hdmi_8996_post_divider {
+	u64 vco_freq;
+	int hsclk_divsel;
+	int vco_ratio;
+	int tx_band_sel;
+};
+
+static inline u32 qmp_hdmi_8996_pll_get_pll_cmp(u64 fdata, unsigned long ref_clk)
+{
+	u64 dividend = HDMI_PLL_CMP_CNT * fdata;
+	u32 divisor = ref_clk * 10;
+	u32 rem;
+
+	rem = do_div(dividend, divisor);
+	if (rem > (divisor >> 1))
+		dividend++;
+
+	return dividend - 1;
+}
+
+static int qmp_hdmi_8996_pll_get_post_div(struct qmp_hdmi_8996_post_divider *pd, u64 bclk)
+{
+	int ratio[] = { 2, 3, 4, 5, 6, 9, 10, 12, 14, 15, 20, 21, 25, 28, 35 };
+	int hs_divsel[] = { 0, 4, 8, 12, 1, 5, 2, 9, 3, 13, 10, 7, 14, 11, 15 };
+	int tx_band_sel[] = { 0, 1, 2, 3 };
+	u64 vco_freq[60];
+	u64 vco, vco_optimal;
+	int half_rate_mode = 0;
+	int vco_optimal_index, vco_freq_index;
+	int i, j;
+
+retry:
+	vco_optimal = HDMI_VCO_MAX_FREQ;
+	vco_optimal_index = -1;
+	vco_freq_index = 0;
+	for (i = 0; i < 15; i++) {
+		for (j = 0; j < 4; j++) {
+			u32 ratio_mult = ratio[i] << tx_band_sel[j];
+
+			vco = bclk >> half_rate_mode;
+			vco *= ratio_mult;
+			vco_freq[vco_freq_index++] = vco;
+		}
+	}
+
+	for (i = 0; i < 60; i++) {
+		u64 vco_tmp = vco_freq[i];
+
+		if ((vco_tmp >= HDMI_VCO_MIN_FREQ) &&
+		    (vco_tmp <= vco_optimal)) {
+			vco_optimal = vco_tmp;
+			vco_optimal_index = i;
+		}
+	}
+
+	if (vco_optimal_index == -1) {
+		if (!half_rate_mode) {
+			half_rate_mode = 1;
+			goto retry;
+		}
+
+		return -EINVAL;
+	}
+
+	pd->vco_freq = vco_optimal;
+	pd->tx_band_sel = tx_band_sel[vco_optimal_index % 4];
+	pd->vco_ratio = ratio[vco_optimal_index / 4];
+	pd->hsclk_divsel = hs_divsel[vco_optimal_index / 4];
+
+	return 0;
+}
+
+static int qmp_hdmi_8996_phy_set_rate(struct qmp_hdmi_phy *hdmi_phy)
+{
+	unsigned long parent_rate = HDMI_DEFAULT_REF_CLOCK;
+	unsigned long rate = hdmi_phy->hdmi_opts.pixel_clk_rate * 1000;
+	struct qmp_hdmi_8996_post_divider pd;
+	bool gen_ssc = false;
+	u64 bclk;
+	u64 dec_start;
+	u64 frac_start;
+	u64 fdata;
+	u32 pll_divisor;
+	u32 rem;
+	u32 integloop_gain;
+	u32 pll_cmp;
+	int i, ret;
+
+	bclk = ((u64)rate) * 10;
+	ret = qmp_hdmi_8996_pll_get_post_div(&pd, bclk);
+	if (ret) {
+		dev_err(hdmi_phy->dev, "PLL calculation failed\n");
+		return ret;
+	}
+
+	dec_start = pd.vco_freq;
+	pll_divisor = 4 * parent_rate;
+	do_div(dec_start, pll_divisor);
+
+	frac_start = pd.vco_freq * (1 << 20);
+
+	rem = do_div(frac_start, pll_divisor);
+	frac_start -= dec_start * (1 << 20);
+	if (rem > (pll_divisor >> 1))
+		frac_start++;
+
+	fdata = pd.vco_freq;
+	do_div(fdata, pd.vco_ratio);
+
+	pll_cmp = qmp_hdmi_8996_pll_get_pll_cmp(fdata, parent_rate);
+
+	/* Initially shut down PHY */
+	dev_dbg(hdmi_phy->dev, "Disabling PHY");
+	hdmi_phy_write(hdmi_phy, REG_HDMI_8996_PHY_PD_CTL, 0x0);
+	udelay(500);
+
+	/* Power up sequence */
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_BG_CTRL, 0x04);
+
+	hdmi_phy_write(hdmi_phy, REG_HDMI_8996_PHY_PD_CTL, 0x1);
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_RESETSM_CNTRL, 0x20);
+	hdmi_phy_write(hdmi_phy, REG_HDMI_8996_PHY_TX0_TX1_LANE_CTL, 0x0f);
+	hdmi_phy_write(hdmi_phy, REG_HDMI_8996_PHY_TX2_TX3_LANE_CTL, 0x0f);
+
+	hdmi_tx_chan_write(hdmi_phy, 0, QSERDES_TX_LANE_MODE, 0x43);
+	hdmi_tx_chan_write(hdmi_phy, 2, QSERDES_TX_LANE_MODE, 0x43);
+
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1e);
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x07);
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_SYSCLK_EN_SEL, 0x37);
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_SYS_CLK_CTRL, 0x02);
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_CLK_ENABLE1, 0x0e);
+
+	if (frac_start != 0 || gen_ssc) {
+		hdmi_pll_write(hdmi_phy, QSERDES_COM_PLL_CCTRL_MODE0, 0x28);
+		hdmi_pll_write(hdmi_phy, QSERDES_COM_PLL_RCTRL_MODE0, 0x16);
+		hdmi_pll_write(hdmi_phy, QSERDES_COM_CP_CTRL_MODE0,
+			       11000000 / (parent_rate/ 20));
+		integloop_gain = (64 * parent_rate) / HDMI_DEFAULT_REF_CLOCK;
+	} else {
+		hdmi_pll_write(hdmi_phy, QSERDES_COM_PLL_CCTRL_MODE0, 0x01);
+		hdmi_pll_write(hdmi_phy, QSERDES_COM_PLL_RCTRL_MODE0, 0x10);
+		hdmi_pll_write(hdmi_phy, QSERDES_COM_CP_CTRL_MODE0, 0x23);
+		integloop_gain = (1022 * parent_rate) / (100 * 1000 * 1000);
+	}
+
+	/* Bypass VCO calibration */
+	if (bclk > HDMI_DIG_FREQ_BIT_CLK_THRESHOLD) {
+		hdmi_pll_write(hdmi_phy, QSERDES_COM_SVS_MODE_CLK_SEL, 1);
+		integloop_gain <<= 1;
+	} else {
+		hdmi_pll_write(hdmi_phy, QSERDES_COM_SVS_MODE_CLK_SEL, 2);
+		integloop_gain <<= 2;
+	}
+
+	integloop_gain = min_t(u32, integloop_gain, 2046);
+
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_BG_TRIM, 0x0f);
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_PLL_IVCO, 0x0f);
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_VCO_TUNE_CTRL, 0);
+
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_BG_CTRL, 0x06);
+
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_CLK_SELECT, 0x30);
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_HSCLK_SEL, 0x20 | pd.hsclk_divsel);
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_LOCK_CMP_EN, 0x0);
+
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_DEC_START_MODE0, dec_start);
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_DIV_FRAC_START1_MODE0,
+		       frac_start & 0xff);
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_DIV_FRAC_START2_MODE0,
+		       (frac_start >> 8) & 0xff);
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_DIV_FRAC_START3_MODE0,
+		       (frac_start >> 16) & 0xf);
+
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_INTEGLOOP_GAIN0_MODE0,
+		       integloop_gain & 0xff);
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_INTEGLOOP_GAIN1_MODE0,
+		       (integloop_gain >> 8) & 0xff);
+
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_LOCK_CMP1_MODE0,
+		       pll_cmp & 0xff);
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_LOCK_CMP2_MODE0,
+		       (pll_cmp >> 8) & 0xff);
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_LOCK_CMP3_MODE0,
+		       (pll_cmp >> 16) & 0x3);
+
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_VCO_TUNE_MAP, 0x00);
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_CORE_CLK_EN, 0x2c);
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_CORECLK_DIV, 5);
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_CMN_CONFIG, 0x02);
+
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_RESCODE_DIV_NUM, 0x15);
+
+	/* TX lanes setup (TX 0/1/2/3) */
+	for (i = 0; i < HDMI_NUM_TX_CHANNEL; i++) {
+		hdmi_tx_chan_write(hdmi_phy, i, QSERDES_TX_CLKBUF_ENABLE, 0x03);
+		hdmi_tx_chan_write(hdmi_phy, i, QSERDES_TX_TX_BAND, pd.tx_band_sel + 4);
+		hdmi_tx_chan_write(hdmi_phy, i, QSERDES_TX_RESET_TSYNC_EN, 0x03);
+		hdmi_tx_chan_write(hdmi_phy, i, QSERDES_TX_VMODE_CTRL1, 0x00);
+		hdmi_tx_chan_write(hdmi_phy, i, QSERDES_TX_TX_DRV_LVL_OFFSET, 0x00);
+		hdmi_tx_chan_write(hdmi_phy, i, QSERDES_TX_RES_CODE_LANE_OFFSET, 0x00);
+		hdmi_tx_chan_write(hdmi_phy, i, QSERDES_TX_TRAN_DRVR_EMP_EN, 0x03);
+		hdmi_tx_chan_write(hdmi_phy, i, QSERDES_TX_PARRATE_REC_DETECT_IDLE_EN, 0x40);
+		hdmi_tx_chan_write(hdmi_phy, i, QSERDES_TX_HP_PD_ENABLES,
+				   i != 3 ? 0xc : 0x3);
+	}
+
+	if (bclk > HDMI_HIGH_FREQ_BIT_CLK_THRESHOLD) {
+		for (i = 0; i < HDMI_NUM_TX_CHANNEL; i++) {
+			hdmi_tx_chan_write(hdmi_phy, i, QSERDES_TX_TX_DRV_LVL,
+					   i != 3 ? 0x25 : 0x22);
+			hdmi_tx_chan_write(hdmi_phy, i, QSERDES_TX_TX_EMP_POST1_LVL,
+					   i != 3 ? 0x23 : 0x27);
+			hdmi_tx_chan_write(hdmi_phy, i, QSERDES_TX_VMODE_CTRL2,
+					   i != 3 ? 0x0d : 0x00);
+		}
+	} else if (bclk > HDMI_MID_FREQ_BIT_CLK_THRESHOLD) {
+		for (i = 0; i < HDMI_NUM_TX_CHANNEL; i++) {
+			hdmi_tx_chan_write(hdmi_phy, i, QSERDES_TX_TX_DRV_LVL, 0x25);
+			hdmi_tx_chan_write(hdmi_phy, i, QSERDES_TX_TX_EMP_POST1_LVL, 0x23);
+			hdmi_tx_chan_write(hdmi_phy, i, QSERDES_TX_VMODE_CTRL2,
+					   i != 3 ? 0x0d : 0x00);
+		}
+	} else {
+		for (i = 0; i < HDMI_NUM_TX_CHANNEL; i++) {
+			hdmi_tx_chan_write(hdmi_phy, i, QSERDES_TX_TX_DRV_LVL, 0x20);
+			hdmi_tx_chan_write(hdmi_phy, i, QSERDES_TX_TX_EMP_POST1_LVL, 0x20);
+			hdmi_tx_chan_write(hdmi_phy, i, QSERDES_TX_VMODE_CTRL2, 0x0e);
+		}
+	}
+
+	if (bclk > HDMI_HIGH_FREQ_BIT_CLK_THRESHOLD)
+		hdmi_phy_write(hdmi_phy, REG_HDMI_8996_PHY_MODE, 0x10);
+	else
+		hdmi_phy_write(hdmi_phy, REG_HDMI_8996_PHY_MODE, 0x00);
+	hdmi_phy_write(hdmi_phy, REG_HDMI_8996_PHY_PD_CTL, 0x1f);
+
+	return 0;
+}
+
+static int qmp_hdmi_8996_phy_power_on(struct phy *phy)
+{
+	struct qmp_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);
+	u32 status;
+	int i, ret = 0;
+
+	ret = qmp_hdmi_8996_phy_set_rate(hdmi_phy);
+	if (ret) {
+		dev_err(hdmi_phy->dev, "Setting pixel clock rate failed\n");
+		return ret;
+	}
+
+	hdmi_phy_write(hdmi_phy, REG_HDMI_8996_PHY_CFG, 0x1);
+	udelay(100);
+
+	hdmi_phy_write(hdmi_phy, REG_HDMI_8996_PHY_CFG, 0x19);
+	udelay(100);
+
+	ret = readl_poll_timeout(hdmi_phy->serdes + QSERDES_COM_C_READY_STATUS,
+				 status, status & BIT(0),
+				 HDMI_PLL_POLL_TIMEOUT_US,
+				 HDMI_PLL_POLL_MAX_READS * HDMI_PLL_POLL_TIMEOUT_US);
+
+	if (ret) {
+		dev_warn(hdmi_phy->dev, "HDMI PLL is not locked\n");
+		return ret;
+	}
+
+	for (i = 0; i < HDMI_NUM_TX_CHANNEL; i++)
+		hdmi_tx_chan_write(hdmi_phy, i,
+				   QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN,
+				   0x6f);
+
+	/* Disable SSC */
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_SSC_PER1, 0x0);
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_SSC_PER2, 0x0);
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_SSC_STEP_SIZE1, 0x0);
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_SSC_STEP_SIZE2, 0x0);
+	hdmi_pll_write(hdmi_phy, QSERDES_COM_SSC_EN_CENTER, 0x2);
+
+	ret = readl_poll_timeout(hdmi_phy->phy_reg + REG_HDMI_8996_PHY_STATUS,
+				 status, status & BIT(0),
+				 HDMI_PLL_POLL_TIMEOUT_US,
+				 HDMI_PLL_POLL_MAX_READS * HDMI_PLL_POLL_TIMEOUT_US);
+	if (ret) {
+		dev_warn(hdmi_phy->dev, "HDMI PLL is not locked\n");
+		return ret;
+	}
+
+	/* Restart the retiming buffer */
+	hdmi_phy_write(hdmi_phy, REG_HDMI_8996_PHY_CFG, 0x18);
+	udelay(1);
+	hdmi_phy_write(hdmi_phy, REG_HDMI_8996_PHY_CFG, 0x19);
+
+	return 0;
+}
+
+static int qmp_hdmi_8996_phy_power_off(struct phy *phy)
+{
+	struct qmp_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);
+
+	hdmi_phy_write(hdmi_phy, REG_HDMI_8996_PHY_CFG, 0x6);
+	usleep_range(100, 150);
+
+	return 0;
+}
+
+static long qmp_hdmi_8996_pll_round_rate(struct clk_hw *hw,
+				     unsigned long rate,
+				     unsigned long *parent_rate)
+{
+	return clamp(rate, HDMI_PCLK_MIN_FREQ, HDMI_PCLK_MAX_FREQ);
+}
+
+static unsigned long qmp_hdmi_8996_pll_recalc_rate(struct clk_hw *hw,
+					       unsigned long parent_rate)
+{
+	struct qmp_hdmi_phy *phy = hw_clk_to_pll(hw);
+	u32 cmp1, cmp2, cmp3, pll_cmp;
+
+	cmp1 = hdmi_pll_read(phy, QSERDES_COM_LOCK_CMP1_MODE0);
+	cmp2 = hdmi_pll_read(phy, QSERDES_COM_LOCK_CMP2_MODE0);
+	cmp3 = hdmi_pll_read(phy, QSERDES_COM_LOCK_CMP3_MODE0);
+
+	pll_cmp = cmp1 | (cmp2 << 8) | (cmp3 << 16);
+
+	return mult_frac(pll_cmp + 1, parent_rate, HDMI_PLL_CMP_CNT);
+}
+
+static int qmp_hdmi_8996_pll_is_enabled(struct clk_hw *hw)
+{
+	struct qmp_hdmi_phy *phy = hw_clk_to_pll(hw);
+	u32 status;
+	int pll_locked;
+
+	status = hdmi_pll_read(phy, QSERDES_COM_C_READY_STATUS);
+	pll_locked = status & BIT(0);
+
+	return pll_locked;
+}
+
+static const struct clk_ops qmp_hdmi_8996_pll_ops = {
+	.recalc_rate = qmp_hdmi_8996_pll_recalc_rate,
+	.round_rate = qmp_hdmi_8996_pll_round_rate,
+	.is_enabled = qmp_hdmi_8996_pll_is_enabled,
+};
+
+static const struct phy_ops qmp_hdmi_8996_phy_ops = {
+	.init		= qmp_hdmi_phy_init,
+	.configure	= qmp_hdmi_phy_configure,
+	.power_on	= qmp_hdmi_8996_phy_power_on,
+	.power_off	= qmp_hdmi_8996_phy_power_off,
+	.exit		= qmp_hdmi_phy_exit,
+	.owner		= THIS_MODULE,
+};
+
+const struct qmp_hdmi_cfg qmp_hdmi_8996_cfg = {
+	.pll_ops = &qmp_hdmi_8996_pll_ops,
+	.phy_ops = &qmp_hdmi_8996_phy_ops,
+};
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-hdmi.h b/drivers/phy/qualcomm/phy-qcom-qmp-hdmi.h
new file mode 100644
index 000000000000..25d307a8f287
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-hdmi.h
@@ -0,0 +1,75 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Linaro Ltd.
+ */
+
+#ifndef PHY_QCOM_QMP_HDMI_H
+#define PHY_QCOM_QMP_HDMI_H
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/regulator/consumer.h>
+#include <linux/phy/phy-hdmi.h>
+
+#define MAX_CLKS 2
+#define MAX_SUPPLIES 2
+
+#define HDMI_NUM_TX_CHANNEL 4
+
+struct qmp_hdmi_phy {
+	struct device *dev;
+	struct phy *phy;
+	void __iomem *serdes;
+	void __iomem *tx[HDMI_NUM_TX_CHANNEL];
+	void __iomem *phy_reg;
+
+	struct phy_configure_opts_hdmi hdmi_opts;
+
+	struct clk_hw pll_hw;
+	struct clk_bulk_data clks[MAX_CLKS];
+	struct regulator_bulk_data supplies[MAX_SUPPLIES];
+};
+
+struct qmp_hdmi_cfg {
+	const struct clk_ops *pll_ops;
+	const struct phy_ops *phy_ops;
+};
+
+#define hw_clk_to_pll(x) container_of(x, struct qmp_hdmi_phy, pll_hw)
+
+static inline void hdmi_phy_write(struct qmp_hdmi_phy *phy, int offset,
+				  u32 data)
+{
+	writel(data, phy->phy_reg + offset);
+}
+
+static inline u32 hdmi_phy_read(struct qmp_hdmi_phy *phy, int offset)
+{
+	return readl(phy->phy_reg + offset);
+}
+
+static inline void hdmi_pll_write(struct qmp_hdmi_phy *phy, int offset,
+				  u32 data)
+{
+	writel(data, phy->serdes + offset);
+}
+
+static inline u32 hdmi_pll_read(struct qmp_hdmi_phy *phy, int offset)
+{
+	return readl(phy->serdes + offset);
+}
+
+static inline void hdmi_tx_chan_write(struct qmp_hdmi_phy *phy, int channel,
+				      int offset, int data)
+{
+	writel(data, phy->tx[channel] + offset);
+}
+
+int qmp_hdmi_phy_init(struct phy *phy);
+int qmp_hdmi_phy_configure(struct phy *phy, union phy_configure_opts *opts);
+int qmp_hdmi_phy_exit(struct phy *phy);
+
+extern const struct qmp_hdmi_cfg qmp_hdmi_8996_cfg;
+
+#endif