| Message ID | 20230525122930.17141-6-srinivas.kandagatla@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | clk: qcom: sc8280xp: add lpasscc reset control | expand |
On Thu, May 25, 2023 at 01:29:29PM +0100, Srinivas Kandagatla wrote: > Soundwire controllers on sc8280xp needs an explicit reset, add > support for this. > > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > --- > arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 23 +++++++++++++++++++++++ > 1 file changed, 23 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > index 6730349e34f4..39be2e89ce05 100644 > --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > @@ -2901,6 +2916,14 @@ > }; > }; > > + lpasscc: clock-controller@33e0000 { > + compatible = "qcom,sc8280xp-lpasscc"; > + reg = <0 0x033e0000 0 0x12000>; > + qcom,adsp-pil-mode; > + #clock-cells = <1>; > + #reset-cells = <1>; > + }; > + > usb_0_qmpphy: phy@88eb000 { > compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; > reg = <0 0x088eb000 0 0x4000>; This one needs to be rebased on linux-next as the lpasscc node should go before the new: sdc2: mmc@8804000 { node. Looks good otherwise: Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Johan
Resending as my previous email probably got lost. If you got it twice, apologies. On 25/05/2023 14:29, Srinivas Kandagatla wrote: > Soundwire controllers on sc8280xp needs an explicit reset, add > support for this. > > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > --- > arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 23 +++++++++++++++++++++++ > 1 file changed, 23 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > index 6730349e34f4..39be2e89ce05 100644 > --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > @@ -6,6 +6,7 @@ > > #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h> > #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> > +#include <dt-bindings/clock/qcom,lpasscc-sc8280xp.h> > #include <dt-bindings/clock/qcom,rpmh.h> > #include <dt-bindings/interconnect/qcom,osm-l3.h> > #include <dt-bindings/interconnect/qcom,sc8280xp.h> > @@ -2560,6 +2561,8 @@ > interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&rxmacro>; > clock-names = "iface"; > + resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>; > + reset-names = "swr_audio_cgcr"; > label = "RX"; > > qcom,din-ports = <0>; > @@ -2634,6 +2637,8 @@ > interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&wsamacro>; > clock-names = "iface"; > + resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA_CGCR>; > + reset-names = "swr_audio_cgcr"; > label = "WSA"; > > qcom,din-ports = <2>; > @@ -2656,6 +2661,14 @@ > status = "disabled"; > }; > > + lpass_audiocc: clock-controller@32a9000 { > + compatible = "qcom,sc8280xp-lpassaudiocc"; > + reg = <0 0x032a9000 0 0x1000>; > + qcom,adsp-pil-mode; Here and... > + #clock-cells = <1>; > + #reset-cells = <1>; > + }; > + > swr2: soundwire-controller@3330000 { > compatible = "qcom,soundwire-v1.6.0"; > reg = <0 0x03330000 0 0x2000>; > @@ -2665,6 +2678,8 @@ > > clocks = <&txmacro>; > clock-names = "iface"; > + resets = <&lpasscc LPASS_AUDIO_SWR_TX_CGCR>; > + reset-names = "swr_audio_cgcr"; > label = "TX"; > #sound-dai-cells = <1>; > #address-cells = <2>; > @@ -2901,6 +2916,14 @@ > }; > }; > > + lpasscc: clock-controller@33e0000 { > + compatible = "qcom,sc8280xp-lpasscc"; > + reg = <0 0x033e0000 0 0x12000>; > + qcom,adsp-pil-mode; ... here - where do you use these properties? Driver ignores them. AFAIR, these were only for sc7280 where we supported two variants for audio. Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 6730349e34f4..39be2e89ce05 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h> #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> +#include <dt-bindings/clock/qcom,lpasscc-sc8280xp.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sc8280xp.h> @@ -2560,6 +2561,8 @@ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rxmacro>; clock-names = "iface"; + resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>; + reset-names = "swr_audio_cgcr"; label = "RX"; qcom,din-ports = <0>; @@ -2634,6 +2637,8 @@ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&wsamacro>; clock-names = "iface"; + resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA_CGCR>; + reset-names = "swr_audio_cgcr"; label = "WSA"; qcom,din-ports = <2>; @@ -2656,6 +2661,14 @@ status = "disabled"; }; + lpass_audiocc: clock-controller@32a9000 { + compatible = "qcom,sc8280xp-lpassaudiocc"; + reg = <0 0x032a9000 0 0x1000>; + qcom,adsp-pil-mode; + #clock-cells = <1>; + #reset-cells = <1>; + }; + swr2: soundwire-controller@3330000 { compatible = "qcom,soundwire-v1.6.0"; reg = <0 0x03330000 0 0x2000>; @@ -2665,6 +2678,8 @@ clocks = <&txmacro>; clock-names = "iface"; + resets = <&lpasscc LPASS_AUDIO_SWR_TX_CGCR>; + reset-names = "swr_audio_cgcr"; label = "TX"; #sound-dai-cells = <1>; #address-cells = <2>; @@ -2901,6 +2916,14 @@ }; }; + lpasscc: clock-controller@33e0000 { + compatible = "qcom,sc8280xp-lpasscc"; + reg = <0 0x033e0000 0 0x12000>; + qcom,adsp-pil-mode; + #clock-cells = <1>; + #reset-cells = <1>; + }; + usb_0_qmpphy: phy@88eb000 { compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; reg = <0 0x088eb000 0 0x4000>;
Soundwire controllers on sc8280xp needs an explicit reset, add support for this. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)