diff mbox series

[v6,1/7] ufs: core: Combine 32-bit command_desc_base_addr_lo/hi

Message ID 0972259fefe5c3c4e223e9d2406eaa673220ff41.1684825500.git.quic_nguyenb@quicinc.com
State Superseded
Headers show
Series [v6,1/7] ufs: core: Combine 32-bit command_desc_base_addr_lo/hi | expand

Commit Message

Bao D. Nguyen May 23, 2023, 7:28 a.m. UTC
The UTP command descriptor base address is a 57-bit field in the
UTP transfer request descriptor. Combine the two 32-bit
command_desc_base_addr_lo/hi fields into a 64-bit for better handling
of this field.

Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
---
 drivers/ufs/core/ufshcd.c | 6 ++----
 include/ufs/ufshci.h      | 6 ++----
 2 files changed, 4 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 9434328..5527d45 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -3875,10 +3875,8 @@  static void ufshcd_host_memory_configure(struct ufs_hba *hba)
 		/* Configure UTRD with command descriptor base address */
 		cmd_desc_element_addr =
 				(cmd_desc_dma_addr + (cmd_desc_size * i));
-		utrdlp[i].command_desc_base_addr_lo =
-				cpu_to_le32(lower_32_bits(cmd_desc_element_addr));
-		utrdlp[i].command_desc_base_addr_hi =
-				cpu_to_le32(upper_32_bits(cmd_desc_element_addr));
+		utrdlp[i].command_desc_base_addr =
+				cpu_to_le64(cmd_desc_element_addr);
 
 		/* Response upiu and prdt offset should be in double words */
 		if (hba->quirks & UFSHCD_QUIRK_PRDT_BYTE_GRAN) {
diff --git a/include/ufs/ufshci.h b/include/ufs/ufshci.h
index 11424bb..7c5a76b 100644
--- a/include/ufs/ufshci.h
+++ b/include/ufs/ufshci.h
@@ -503,8 +503,7 @@  struct request_desc_header {
 /**
  * struct utp_transfer_req_desc - UTP Transfer Request Descriptor (UTRD)
  * @header: UTRD header DW-0 to DW-3
- * @command_desc_base_addr_lo: UCD base address low DW-4
- * @command_desc_base_addr_hi: UCD base address high DW-5
+ * @command_desc_base_addr: UCD base address DW 4-5
  * @response_upiu_length: response UPIU length DW-6
  * @response_upiu_offset: response UPIU offset DW-6
  * @prd_table_length: Physical region descriptor length DW-7
@@ -516,8 +515,7 @@  struct utp_transfer_req_desc {
 	struct request_desc_header header;
 
 	/* DW 4-5*/
-	__le32  command_desc_base_addr_lo;
-	__le32  command_desc_base_addr_hi;
+	__le64  command_desc_base_addr;
 
 	/* DW 6 */
 	__le16  response_upiu_length;