| Message ID | 20230526192210.3146896-12-bhupesh.sharma@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: qcom: Enable Crypto Engine for a few Qualcomm SoCs | expand |
On 26.05.2023 21:22, Bhupesh Sharma wrote: > From: Neil Armstrong <neil.armstrong@linaro.org> > > Add crypto engine (CE) and CE BAM related nodes and definitions > for the SM8450 SoC. > > Tested-by: Anders Roxell <anders.roxell@linaro.org> > Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > [Bhupesh: Corrected the compatible list] > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > --- > arch/arm64/boot/dts/qcom/sm8450.dtsi | 28 ++++++++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi > index 7f193802a7c4..1642daea9624 100644 > --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi > @@ -4173,6 +4173,34 @@ ufs_mem_phy_lanes: phy@1d87400 { > }; > }; > > + cryptobam: dma-controller@1dc4000 { > + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; > + reg = <0 0x01dc4000 0 0x28000>; > + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; > + #dma-cells = <1>; > + qcom,ee = <0>; > + qcom,controlled-remotely; > + iommus = <&apps_smmu 0x584 0x11>, > + <&apps_smmu 0x588 0x0>, > + <&apps_smmu 0x598 0x5>, Does mapping 0x598 with and without the SMR mask make sense? (this is a genuine question, I have no idea but would be leaning on the side of no) Konrad > + <&apps_smmu 0x59a 0x0>, > + <&apps_smmu 0x59f 0x0>; > + }; > + > + crypto: crypto@1de0000 { > + compatible = "qcom,sm8450-qce", "qcom,sm8150-qce", "qcom,qce"; > + reg = <0 0x01dfa000 0 0x6000>; > + dmas = <&cryptobam 4>, <&cryptobam 5>; > + dma-names = "rx", "tx"; > + iommus = <&apps_smmu 0x584 0x11>, > + <&apps_smmu 0x588 0x0>, > + <&apps_smmu 0x598 0x5>, > + <&apps_smmu 0x59a 0x0>, > + <&apps_smmu 0x59f 0x0>; > + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; > + interconnect-names = "memory"; > + }; > + > sdhc_2: mmc@8804000 { > compatible = "qcom,sm8450-sdhci", "qcom,sdhci-msm-v5"; > reg = <0 0x08804000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 7f193802a7c4..1642daea9624 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -4173,6 +4173,34 @@ ufs_mem_phy_lanes: phy@1d87400 { }; }; + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0 0x01dc4000 0 0x28000>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + iommus = <&apps_smmu 0x584 0x11>, + <&apps_smmu 0x588 0x0>, + <&apps_smmu 0x598 0x5>, + <&apps_smmu 0x59a 0x0>, + <&apps_smmu 0x59f 0x0>; + }; + + crypto: crypto@1de0000 { + compatible = "qcom,sm8450-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0 0x01dfa000 0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x584 0x11>, + <&apps_smmu 0x588 0x0>, + <&apps_smmu 0x598 0x5>, + <&apps_smmu 0x59a 0x0>, + <&apps_smmu 0x59f 0x0>; + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "memory"; + }; + sdhc_2: mmc@8804000 { compatible = "qcom,sm8450-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>;