diff mbox series

dt-bindings: pinctrl: Drop k3

Message ID 20230601173831.982429-1-nm@ti.com
State Accepted
Commit 32a2e6ab2cebed4d79a4ee70ba86d5a44c841270
Headers show
Series dt-bindings: pinctrl: Drop k3 | expand

Commit Message

Nishanth Menon June 1, 2023, 5:38 p.m. UTC 
For convenience (less code duplication), the pin controller pin
configuration register values were defined in the bindings header.
These are not some IDs or other abstraction layer but raw numbers used
in the registers.

These constants do not fit the purpose of bindings. They do not
provide any abstraction, any hardware and driver independent ID. In
fact, the Linux pinctrl-single driver actually do not use the bindings
header at all.

Commit f2de003e1426 ("dt-bindings: pinctrl: k3: Deprecate header with
register constants") already moved users to the local header, so, drop
the binding header. See background discussion in [1].

While at it, clean up the MAINTAINERS file which is the only reference
left.

[1]: https://lore.kernel.org/linux-arm-kernel/71c7feff-4189-f12f-7353-bce41a61119d@linaro.org/
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
Linus,

If you could pick this up for the next 6.5 kernel window now that we have kept the
old header around for one cycle.

Ref: https://lore.kernel.org/linux-arm-kernel/20230313160019.vask6atfs6qwphml@twerp/

 MAINTAINERS                      |  1 -
 include/dt-bindings/pinctrl/k3.h | 60 --------------------------------
 2 files changed, 61 deletions(-)
 delete mode 100644 include/dt-bindings/pinctrl/k3.h

Comments

Krzysztof Kozlowski June 2, 2023, 6:46 a.m. UTC | #1 
On 01/06/2023 19:38, Nishanth Menon wrote:
> For convenience (less code duplication), the pin controller pin
> configuration register values were defined in the bindings header.
> These are not some IDs or other abstraction layer but raw numbers used
> in the registers.
> 
> These constants do not fit the purpose of bindings. They do not
> provide any abstraction, any hardware and driver independent ID. In
> fact, the Linux pinctrl-single driver actually do not use the bindings
> header at all.
> 
> Commit f2de003e1426 ("dt-bindings: pinctrl: k3: Deprecate header with
> register constants") already moved users to the local header, so, drop
> the binding header. See background discussion in [1].
> 

This happened just a release ago, so I would rather expect to have it
deprecated for some time, so out of tree DTBs won't be broken. But any
platform ABI is up to platform maintainer so:

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
Linus Walleij June 9, 2023, 6:56 a.m. UTC | #2 
On Thu, Jun 1, 2023 at 7:38 PM Nishanth Menon <nm@ti.com> wrote:

> If you could pick this up for the next 6.5 kernel window now that we have kept the
> old header around for one cycle.

Patch applied!

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 16ee982ce8cf..d25a463fd6a9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2948,7 +2948,6 @@  F:	Documentation/devicetree/bindings/arm/ti/k3.yaml
 F:	Documentation/devicetree/bindings/hwinfo/ti,k3-socinfo.yaml
 F:	arch/arm64/boot/dts/ti/Makefile
 F:	arch/arm64/boot/dts/ti/k3-*
-F:	include/dt-bindings/pinctrl/k3.h
 
 ARM/TOSHIBA VISCONTI ARCHITECTURE
 M:	Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
diff --git a/include/dt-bindings/pinctrl/k3.h b/include/dt-bindings/pinctrl/k3.h
deleted file mode 100644
index b5aca149664e..000000000000
--- a/include/dt-bindings/pinctrl/k3.h
+++ /dev/null
@@ -1,60 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * This header provides constants for pinctrl bindings for TI's K3 SoC
- * family.
- *
- * Copyright (C) 2018-2021 Texas Instruments Incorporated - https://www.ti.com/
- */
-#ifndef _DT_BINDINGS_PINCTRL_TI_K3_H
-#define _DT_BINDINGS_PINCTRL_TI_K3_H
-
-/*
- * These bindings are deprecated, because they do not match the actual
- * concept of bindings but rather contain pure register values.
- * Instead include the header in the DTS source directory.
- */
-#warning "These bindings are deprecated. Instead, use the header in the DTS source directory."
-
-#define PULLUDEN_SHIFT		(16)
-#define PULLTYPESEL_SHIFT	(17)
-#define RXACTIVE_SHIFT		(18)
-
-#define PULL_DISABLE		(1 << PULLUDEN_SHIFT)
-#define PULL_ENABLE		(0 << PULLUDEN_SHIFT)
-
-#define PULL_UP			(1 << PULLTYPESEL_SHIFT | PULL_ENABLE)
-#define PULL_DOWN		(0 << PULLTYPESEL_SHIFT | PULL_ENABLE)
-
-#define INPUT_EN		(1 << RXACTIVE_SHIFT)
-#define INPUT_DISABLE		(0 << RXACTIVE_SHIFT)
-
-/* Only these macros are expected be used directly in device tree files */
-#define PIN_OUTPUT		(INPUT_DISABLE | PULL_DISABLE)
-#define PIN_OUTPUT_PULLUP	(INPUT_DISABLE | PULL_UP)
-#define PIN_OUTPUT_PULLDOWN	(INPUT_DISABLE | PULL_DOWN)
-#define PIN_INPUT		(INPUT_EN | PULL_DISABLE)
-#define PIN_INPUT_PULLUP	(INPUT_EN | PULL_UP)
-#define PIN_INPUT_PULLDOWN	(INPUT_EN | PULL_DOWN)
-
-#define AM62AX_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
-#define AM62AX_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
-
-#define AM62X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
-#define AM62X_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
-
-#define AM64X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
-#define AM64X_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
-
-#define AM65X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
-#define AM65X_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
-
-#define J721E_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
-#define J721E_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
-
-#define J721S2_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
-#define J721S2_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
-
-#define J784S4_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
-#define J784S4_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
-
-#endif