diff mbox series

[v5,2/3] usb: gadget: udc: core: Invoke usb_gadget_connect only when started

Message ID 20230531040203.19295-2-badhri@google.com
State New
Headers show
Series [v5,1/3] usb: gadget: udc: core: Offload usb_udc_vbus_handler processing | expand

Commit Message

Badhri Jagan Sridharan May 31, 2023, 4:02 a.m. UTC
usb_udc_connect_control() does not check to see if the udc has already
been started. This causes gadget->ops->pullup to be called through
usb_gadget_connect() when invoked from usb_udc_vbus_handler() even
before usb_gadget_udc_start() is called. Guard this by checking for
udc->started in usb_udc_connect_control() before invoking
usb_gadget_connect().

Guarding udc->vbus, udc->started, gadget->connect, gadget->deactivate
related functions with connect_lock. usb_gadget_connect_locked(),
usb_gadget_disconnect_locked(), usb_udc_connect_control_locked(),
usb_gadget_udc_start_locked(), usb_gadget_udc_stop_locked() are called
with this lock held as they can be simulataneously invoked from
different code paths.

Adding an additional check to make sure udc is started(udc->started)
before pullup callback is invoked.

This commit was reverted due to the crash reported in
https://lore.kernel.org/all/ZF4BvgsOyoKxdPFF@francesco-nb.int.toradex.com/.
commit 16737e78d190 ("usb: gadget: udc: core: Offload usb_udc_vbus_handler processing")
addresses the crash reported.

Cc: stable@vger.kernel.org
Fixes: 628ef0d273a6 ("usb: udc: add usb_udc_vbus_handler")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
---
v5 is the first version in this series.
---
 drivers/usb/gadget/udc/core.c | 148 ++++++++++++++++++++++++----------
 1 file changed, 104 insertions(+), 44 deletions(-)

Comments

Badhri Jagan Sridharan May 31, 2023, 10:40 p.m. UTC | #1
On Wed, May 31, 2023 at 10:55 AM Alan Stern <stern@rowland.harvard.edu> wrote:
>
> On Wed, May 31, 2023 at 04:02:02AM +0000, Badhri Jagan Sridharan wrote:
> > usb_udc_connect_control() does not check to see if the udc has already
> > been started. This causes gadget->ops->pullup to be called through
> > usb_gadget_connect() when invoked from usb_udc_vbus_handler() even
> > before usb_gadget_udc_start() is called. Guard this by checking for
> > udc->started in usb_udc_connect_control() before invoking
> > usb_gadget_connect().
>
> After a merged version of patches 1/3 and 3/3 have been applied, it
> seems like most of this will not be needed any more.  Maybe not any of
> it.

Without the connect_lock introduced in this patch, wouldn't the
usb_gadget_connect()/
usb_gadget_disconnect() through soft_connect_store() race against
usb_gadget_connect()/ usb_gadget_disconnect() through
usb_udc_connect_control() ?

On a side note, I am working on merging  patches 1/3 and 3/3.

Thanks,
Badhri

>
> usb_udc_connect_control() gets called from only two places.  One of them
> is in gadget_bind_driver(), where we know that the UDC has been started
> and connecting is allowed.  The other place is the vbus work routine
> queued by usb_udc_vbus_handler().  If that place checks the new
> allow_connect flag before calling usb_gadget_connect(), nothing more
> will be needed.  You just have to make sure that the allow_connect flag
> is set in gadget_bind_driver between the start and connect_control
> calls, and it is cleared in gadget_unbind_driver before the
> cancel_work_sync call.
>
> It's possible that a new mutex will be needed to synchronize accesses to
> the allow_connect flag.  That's something you will have to study and
> decide on.  But if you can avoid adding one, that would be best.
>
> > Guarding udc->vbus, udc->started, gadget->connect, gadget->deactivate
> > related functions with connect_lock. usb_gadget_connect_locked(),
> > usb_gadget_disconnect_locked(), usb_udc_connect_control_locked(),
> > usb_gadget_udc_start_locked(), usb_gadget_udc_stop_locked() are called
> > with this lock held as they can be simulataneously invoked from
> > different code paths.
>
> It's a general principle of kernel programming that locks protect data,
> not code.  So if this patch were to be accepted, you would have to
> change this description to say that connect_lock guards various flags,
> not various function calls.
>
> Alan Stern
diff mbox series

Patch

diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index 44a9f32679b5..6ffe5fda8bb7 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -37,6 +37,10 @@  static const struct bus_type gadget_bus_type;
  * @vbus: for udcs who care about vbus status, this value is real vbus status;
  * for udcs who do not care about vbus status, this value is always true
  * @started: the UDC's started state. True if the UDC had started.
+ * @connect_lock: protects udc->vbus, udc->started, gadget->connect, gadget->deactivate related
+ * functions. usb_gadget_connect_locked, usb_gadget_disconnect_locked,
+ * usb_udc_connect_control_locked, usb_gadget_udc_start_locked, usb_gadget_udc_stop_locked are
+ * called with this lock held.
  *
  * This represents the internal data structure which is used by the UDC-class
  * to hold information about udc driver and gadget together.
@@ -49,6 +53,7 @@  struct usb_udc {
 	bool				vbus;
 	bool				started;
 	struct work_struct		vbus_work;
+	struct mutex			connect_lock;
 };
 
 static struct class *udc_class;
@@ -688,17 +693,9 @@  int usb_gadget_vbus_disconnect(struct usb_gadget *gadget)
 }
 EXPORT_SYMBOL_GPL(usb_gadget_vbus_disconnect);
 
-/**
- * usb_gadget_connect - software-controlled connect to USB host
- * @gadget:the peripheral being connected
- *
- * Enables the D+ (or potentially D-) pullup.  The host will start
- * enumerating this gadget when the pullup is active and a VBUS session
- * is active (the link is powered).
- *
- * Returns zero on success, else negative errno.
- */
-int usb_gadget_connect(struct usb_gadget *gadget)
+/* Internal version of usb_gadget_connect needs to be called with connect_lock held. */
+static int usb_gadget_connect_locked(struct usb_gadget *gadget)
+	__must_hold(&gadget->udc->connect_lock)
 {
 	int ret = 0;
 
@@ -707,10 +704,12 @@  int usb_gadget_connect(struct usb_gadget *gadget)
 		goto out;
 	}
 
-	if (gadget->deactivated) {
+	if (gadget->deactivated || !gadget->udc->started) {
 		/*
 		 * If gadget is deactivated we only save new state.
 		 * Gadget will be connected automatically after activation.
+		 *
+		 * udc first needs to be started before gadget can be pulled up.
 		 */
 		gadget->connected = true;
 		goto out;
@@ -725,22 +724,32 @@  int usb_gadget_connect(struct usb_gadget *gadget)
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(usb_gadget_connect);
 
 /**
- * usb_gadget_disconnect - software-controlled disconnect from USB host
- * @gadget:the peripheral being disconnected
- *
- * Disables the D+ (or potentially D-) pullup, which the host may see
- * as a disconnect (when a VBUS session is active).  Not all systems
- * support software pullup controls.
+ * usb_gadget_connect - software-controlled connect to USB host
+ * @gadget:the peripheral being connected
  *
- * Following a successful disconnect, invoke the ->disconnect() callback
- * for the current gadget driver so that UDC drivers don't need to.
+ * Enables the D+ (or potentially D-) pullup.  The host will start
+ * enumerating this gadget when the pullup is active and a VBUS session
+ * is active (the link is powered).
  *
  * Returns zero on success, else negative errno.
  */
-int usb_gadget_disconnect(struct usb_gadget *gadget)
+int usb_gadget_connect(struct usb_gadget *gadget)
+{
+	int ret;
+
+	mutex_lock(&gadget->udc->connect_lock);
+	ret = usb_gadget_connect_locked(gadget);
+	mutex_unlock(&gadget->udc->connect_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_connect);
+
+/* Internal version of usb_gadget_disconnect needs to be called with connect_lock held. */
+static int usb_gadget_disconnect_locked(struct usb_gadget *gadget)
+	__must_hold(&gadget->udc->connect_lock)
 {
 	int ret = 0;
 
@@ -752,10 +761,12 @@  int usb_gadget_disconnect(struct usb_gadget *gadget)
 	if (!gadget->connected)
 		goto out;
 
-	if (gadget->deactivated) {
+	if (gadget->deactivated || !gadget->udc->started) {
 		/*
 		 * If gadget is deactivated we only save new state.
 		 * Gadget will stay disconnected after activation.
+		 *
+		 * udc should have been started before gadget being pulled down.
 		 */
 		gadget->connected = false;
 		goto out;
@@ -775,6 +786,30 @@  int usb_gadget_disconnect(struct usb_gadget *gadget)
 
 	return ret;
 }
+
+/**
+ * usb_gadget_disconnect - software-controlled disconnect from USB host
+ * @gadget:the peripheral being disconnected
+ *
+ * Disables the D+ (or potentially D-) pullup, which the host may see
+ * as a disconnect (when a VBUS session is active).  Not all systems
+ * support software pullup controls.
+ *
+ * Following a successful disconnect, invoke the ->disconnect() callback
+ * for the current gadget driver so that UDC drivers don't need to.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_disconnect(struct usb_gadget *gadget)
+{
+	int ret;
+
+	mutex_lock(&gadget->udc->connect_lock);
+	ret = usb_gadget_disconnect_locked(gadget);
+	mutex_unlock(&gadget->udc->connect_lock);
+
+	return ret;
+}
 EXPORT_SYMBOL_GPL(usb_gadget_disconnect);
 
 /**
@@ -795,10 +830,11 @@  int usb_gadget_deactivate(struct usb_gadget *gadget)
 	if (gadget->deactivated)
 		goto out;
 
+	mutex_lock(&gadget->udc->connect_lock);
 	if (gadget->connected) {
-		ret = usb_gadget_disconnect(gadget);
+		ret = usb_gadget_disconnect_locked(gadget);
 		if (ret)
-			goto out;
+			goto unlock;
 
 		/*
 		 * If gadget was being connected before deactivation, we want
@@ -808,6 +844,8 @@  int usb_gadget_deactivate(struct usb_gadget *gadget)
 	}
 	gadget->deactivated = true;
 
+unlock:
+	mutex_unlock(&gadget->udc->connect_lock);
 out:
 	trace_usb_gadget_deactivate(gadget, ret);
 
@@ -831,6 +869,7 @@  int usb_gadget_activate(struct usb_gadget *gadget)
 	if (!gadget->deactivated)
 		goto out;
 
+	mutex_lock(&gadget->udc->connect_lock);
 	gadget->deactivated = false;
 
 	/*
@@ -838,7 +877,8 @@  int usb_gadget_activate(struct usb_gadget *gadget)
 	 * while it was being deactivated, we call usb_gadget_connect().
 	 */
 	if (gadget->connected)
-		ret = usb_gadget_connect(gadget);
+		ret = usb_gadget_connect_locked(gadget);
+	mutex_unlock(&gadget->udc->connect_lock);
 
 out:
 	trace_usb_gadget_activate(gadget, ret);
@@ -1079,19 +1119,22 @@  EXPORT_SYMBOL_GPL(usb_gadget_set_state);
 
 /* ------------------------------------------------------------------------- */
 
-static void usb_udc_connect_control(struct usb_udc *udc)
+/* Acquire connect_lock before calling this function. */
+static void usb_udc_connect_control_locked(struct usb_udc *udc) __must_hold(&udc->connect_lock)
 {
-	if (udc->vbus)
-		usb_gadget_connect(udc->gadget);
+	if (udc->vbus && udc->started)
+		usb_gadget_connect_locked(udc->gadget);
 	else
-		usb_gadget_disconnect(udc->gadget);
+		usb_gadget_disconnect_locked(udc->gadget);
 }
 
 static void vbus_event_work(struct work_struct *work)
 {
 	struct usb_udc *udc = container_of(work, struct usb_udc, vbus_work);
 
-	usb_udc_connect_control(udc);
+	mutex_lock(&udc->connect_lock);
+	usb_udc_connect_control_locked(udc);
+	mutex_unlock(&udc->connect_lock);
 }
 
 /**
@@ -1139,7 +1182,7 @@  void usb_gadget_udc_reset(struct usb_gadget *gadget,
 EXPORT_SYMBOL_GPL(usb_gadget_udc_reset);
 
 /**
- * usb_gadget_udc_start - tells usb device controller to start up
+ * usb_gadget_udc_start_locked - tells usb device controller to start up
  * @udc: The UDC to be started
  *
  * This call is issued by the UDC Class driver when it's about
@@ -1150,8 +1193,11 @@  EXPORT_SYMBOL_GPL(usb_gadget_udc_reset);
  * necessary to have it powered on.
  *
  * Returns zero on success, else negative errno.
+ *
+ * Caller should acquire connect_lock before invoking this function.
  */
-static inline int usb_gadget_udc_start(struct usb_udc *udc)
+static inline int usb_gadget_udc_start_locked(struct usb_udc *udc)
+	__must_hold(&udc->connect_lock)
 {
 	int ret;
 
@@ -1168,7 +1214,7 @@  static inline int usb_gadget_udc_start(struct usb_udc *udc)
 }
 
 /**
- * usb_gadget_udc_stop - tells usb device controller we don't need it anymore
+ * usb_gadget_udc_stop_locked - tells usb device controller we don't need it anymore
  * @udc: The UDC to be stopped
  *
  * This call is issued by the UDC Class driver after calling
@@ -1177,8 +1223,11 @@  static inline int usb_gadget_udc_start(struct usb_udc *udc)
  * The details are implementation specific, but it can go as
  * far as powering off UDC completely and disable its data
  * line pullups.
+ *
+ * Caller should acquire connect lock before invoking this function.
  */
-static inline void usb_gadget_udc_stop(struct usb_udc *udc)
+static inline void usb_gadget_udc_stop_locked(struct usb_udc *udc)
+	__must_hold(&udc->connect_lock)
 {
 	if (!udc->started) {
 		dev_err(&udc->dev, "UDC had already stopped\n");
@@ -1337,6 +1386,7 @@  int usb_add_gadget(struct usb_gadget *gadget)
 
 	udc->gadget = gadget;
 	gadget->udc = udc;
+	mutex_init(&udc->connect_lock);
 
 	udc->started = false;
 
@@ -1539,11 +1589,15 @@  static int gadget_bind_driver(struct device *dev)
 	if (ret)
 		goto err_bind;
 
-	ret = usb_gadget_udc_start(udc);
-	if (ret)
+	mutex_lock(&udc->connect_lock);
+	ret = usb_gadget_udc_start_locked(udc);
+	if (ret) {
+		mutex_unlock(&udc->connect_lock);
 		goto err_start;
+	}
 	usb_gadget_enable_async_callbacks(udc);
-	usb_udc_connect_control(udc);
+	usb_udc_connect_control_locked(udc);
+	mutex_unlock(&udc->connect_lock);
 
 	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
 	return 0;
@@ -1575,12 +1629,14 @@  static void gadget_unbind_driver(struct device *dev)
 	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
 
 	cancel_work_sync(&udc->vbus_work);
-	usb_gadget_disconnect(gadget);
+	mutex_lock(&udc->connect_lock);
+	usb_gadget_disconnect_locked(gadget);
 	usb_gadget_disable_async_callbacks(udc);
 	if (gadget->irq)
 		synchronize_irq(gadget->irq);
 	udc->driver->unbind(gadget);
-	usb_gadget_udc_stop(udc);
+	usb_gadget_udc_stop_locked(udc);
+	mutex_unlock(&udc->connect_lock);
 
 	mutex_lock(&udc_lock);
 	driver->is_bound = false;
@@ -1666,11 +1722,15 @@  static ssize_t soft_connect_store(struct device *dev,
 	}
 
 	if (sysfs_streq(buf, "connect")) {
-		usb_gadget_udc_start(udc);
-		usb_gadget_connect(udc->gadget);
+		mutex_lock(&udc->connect_lock);
+		usb_gadget_udc_start_locked(udc);
+		usb_gadget_connect_locked(udc->gadget);
+		mutex_unlock(&udc->connect_lock);
 	} else if (sysfs_streq(buf, "disconnect")) {
-		usb_gadget_disconnect(udc->gadget);
-		usb_gadget_udc_stop(udc);
+		mutex_lock(&udc->connect_lock);
+		usb_gadget_disconnect_locked(udc->gadget);
+		usb_gadget_udc_stop_locked(udc);
+		mutex_unlock(&udc->connect_lock);
 	} else {
 		dev_err(dev, "unsupported command '%s'\n", buf);
 		ret = -EINVAL;