diff mbox series

[v3] wifi: ath11k: update proper pdev/vdev id for testmode command

Message ID 20230601143214.13006-1-quic_rajkbhag@quicinc.com
State New
Headers show
Series [v3] wifi: ath11k: update proper pdev/vdev id for testmode command | expand

Commit Message

Raj Kumar Bhagat June 1, 2023, 2:32 p.m. UTC 
From: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>

User can extend test mode command support to set vdev and pdev params
for debug purpose at run time by sending vdev/pdev param set command
through the testmode command interface.

Fill the proper pdev/vdev id in driver since, pdev/vdev id details may
not be available at user space. It will make sure that the proper
vdev/pdev ids are sent to firmware.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
---
v3:
- Rebased and validated in latest ToT.

v2:
- Rebased and validated on latest version (v4) of dependency patch.
---
 drivers/net/wireless/ath/ath11k/testmode.c | 37 ++++++++++++++++++++--
 1 file changed, 34 insertions(+), 3 deletions(-)


base-commit: a4756ac34a7002861c9bdf8cf45aec53a77fb78d

Comments

Kalle Valo June 9, 2023, 12:30 p.m. UTC | #1 
Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> wrote:

> User can extend test mode command support to set vdev and pdev params
> for debug purpose at run time by sending vdev/pdev param set command
> through the testmode command interface.
> 
> Fill the proper pdev/vdev id in driver since, pdev/vdev id details may
> not be available at user space. It will make sure that the proper
> vdev/pdev ids are sent to firmware.
> 
> Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
> Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
> 
> Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>

Patch applied to ath-next branch of ath.git, thanks.

37fdb33c87c2 wifi: ath11k: update proper pdev/vdev id for testmode command
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath11k/testmode.c b/drivers/net/wireless/ath/ath11k/testmode.c
index 3611b6ec39c6..8fc5cddb28bd 100644
--- a/drivers/net/wireless/ath/ath11k/testmode.c
+++ b/drivers/net/wireless/ath/ath11k/testmode.c
@@ -297,13 +297,16 @@  static int ath11k_tm_cmd_testmode_start(struct ath11k *ar, struct nlattr *tb[])
 	return ret;
 }
 
-static int ath11k_tm_cmd_wmi(struct ath11k *ar, struct nlattr *tb[])
+static int ath11k_tm_cmd_wmi(struct ath11k *ar, struct nlattr *tb[],
+			     struct ieee80211_vif *vif)
 {
 	struct ath11k_pdev_wmi *wmi = ar->wmi;
 	struct sk_buff *skb;
+	struct ath11k_vif *arvif;
 	u32 cmd_id, buf_len;
-	int ret;
+	int ret, tag;
 	void *buf;
+	u32 *ptr;
 
 	mutex_lock(&ar->conf_mutex);
 
@@ -327,6 +330,34 @@  static int ath11k_tm_cmd_wmi(struct ath11k *ar, struct nlattr *tb[])
 
 	cmd_id = nla_get_u32(tb[ATH11K_TM_ATTR_WMI_CMDID]);
 
+	/* Make sure that the buffer length is long enough to
+	 * hold TLV and pdev/vdev id.
+	 */
+	if (buf_len < sizeof(struct wmi_tlv) + sizeof(u32)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ptr = buf;
+	tag = FIELD_GET(WMI_TLV_TAG, *ptr);
+
+	/* pdev/vdev id start after TLV header */
+	ptr++;
+
+	if (tag == WMI_TAG_PDEV_SET_PARAM_CMD)
+		*ptr = ar->pdev->pdev_id;
+
+	if (ar->ab->fw_mode != ATH11K_FIRMWARE_MODE_FTM &&
+	    (tag == WMI_TAG_VDEV_SET_PARAM_CMD || tag == WMI_TAG_UNIT_TEST_CMD)) {
+		if (vif) {
+			arvif = (struct ath11k_vif *)vif->drv_priv;
+			*ptr = arvif->vdev_id;
+		} else {
+			ret = -EINVAL;
+			goto out;
+		}
+	}
+
 	ath11k_dbg(ar->ab, ATH11K_DBG_TESTMODE,
 		   "cmd wmi cmd_id %d buf length %d\n",
 		   cmd_id, buf_len);
@@ -460,7 +491,7 @@  int ath11k_tm_cmd(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	case ATH11K_TM_CMD_GET_VERSION:
 		return ath11k_tm_cmd_get_version(ar, tb);
 	case ATH11K_TM_CMD_WMI:
-		return ath11k_tm_cmd_wmi(ar, tb);
+		return ath11k_tm_cmd_wmi(ar, tb, vif);
 	case ATH11K_TM_CMD_TESTMODE_START:
 		return ath11k_tm_cmd_testmode_start(ar, tb);
 	case ATH11K_TM_CMD_WMI_FTM: