@@ -18,7 +18,8 @@
#include "i2c-hid.h"
struct elan_i2c_hid_chip_data {
- unsigned int post_gpio_reset_delay_ms;
+ unsigned int post_gpio_reset_on_delay_ms;
+ unsigned int post_gpio_reset_off_delay_ms;
unsigned int post_power_delay_ms;
u16 hid_descriptor_address;
};
@@ -52,8 +53,8 @@ static int elan_i2c_hid_power_up(struct i2chid_ops *ops)
msleep(ihid_elan->chip_data->post_power_delay_ms);
gpiod_set_value_cansleep(ihid_elan->reset_gpio, 0);
- if (ihid_elan->chip_data->post_gpio_reset_delay_ms)
- msleep(ihid_elan->chip_data->post_gpio_reset_delay_ms);
+ if (ihid_elan->chip_data->post_gpio_reset_on_delay_ms)
+ msleep(ihid_elan->chip_data->post_gpio_reset_on_delay_ms);
return 0;
}
@@ -64,6 +65,9 @@ static void elan_i2c_hid_power_down(struct i2chid_ops *ops)
container_of(ops, struct i2c_hid_of_elan, ops);
gpiod_set_value_cansleep(ihid_elan->reset_gpio, 1);
+ if (ihid_elan->chip_data->post_gpio_reset_off_delay_ms)
+ msleep(ihid_elan->chip_data->post_gpio_reset_off_delay_ms);
+
regulator_disable(ihid_elan->vccio);
regulator_disable(ihid_elan->vcc33);
}
@@ -101,12 +105,20 @@ static int i2c_hid_of_elan_probe(struct i2c_client *client)
static const struct elan_i2c_hid_chip_data elan_ekth6915_chip_data = {
.post_power_delay_ms = 1,
- .post_gpio_reset_delay_ms = 300,
+ .post_gpio_reset_on_delay_ms = 300,
+ .hid_descriptor_address = 0x0001,
+};
+
+static const struct elan_i2c_hid_chip_data ilitek_ili9882t_chip_data = {
+ .post_power_delay_ms = 1,
+ .post_gpio_reset_on_delay_ms = 200,
+ .post_gpio_reset_off_delay_ms = 65,
.hid_descriptor_address = 0x0001,
};
static const struct of_device_id elan_i2c_hid_of_match[] = {
{ .compatible = "elan,ekth6915", .data = &elan_ekth6915_chip_data },
+ { .compatible = "ilitek,ili9882t", .data = &ilitek_ili9882t_chip_data },
{ }
};
MODULE_DEVICE_TABLE(of, elan_i2c_hid_of_match);
The ili9882t is a TDDI IC (Touch with Display Driver). The datasheet specifies there should be 60ms between touch SDA sleep and panel RESX. Doug's series[1] allows panels and touchscreens to power on/off together, so we can add the 65 ms delay in i2c_hid_core_suspend before panel_unprepare. [1]: https: //lore.kernel.org/all/20230523193017.4109557-1-dianders@chromium.org/ Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com> --- drivers/hid/i2c-hid/i2c-hid-of-elan.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-)