@@ -31,6 +31,21 @@ memory@40000000 {
reg = <0x0 0x40000000 0x1 0x0>;
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x20000000>;
+ alignment = <0x0 0x1000>;
+ alloc-ranges = <0x0 0x80000000 0x0 0x20000000>;
+ linux,cma-default;
+ };
+ };
+
gpio-restart {
compatible = "gpio-restart";
gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>;
@@ -214,6 +229,41 @@ GPOEN_DISABLE,
slew-rate = <0>;
};
};
+
+ hdmi_pins: hdmi-0 {
+ hdmi-scl-pins {
+ pinmux = <GPIOMUX(0, GPOUT_SYS_HDMI_DDC_SCL,
+ GPOEN_SYS_HDMI_DDC_SCL,
+ GPI_SYS_HDMI_DDC_SCL)>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ hdmi-sda-pins {
+ pinmux = <GPIOMUX(1, GPOUT_SYS_HDMI_DDC_SDA,
+ GPOEN_SYS_HDMI_DDC_SDA,
+ GPI_SYS_HDMI_DDC_SDA)>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ hdmi-cec-pins {
+ pinmux = <GPIOMUX(14, GPOUT_SYS_HDMI_CEC_SDA,
+ GPOEN_SYS_HDMI_CEC_SDA,
+ GPI_SYS_HDMI_CEC_SDA)>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ hdmi-hpd-pins {
+ pinmux = <GPIOMUX(15, GPOUT_HIGH,
+ GPOEN_ENABLE,
+ GPI_SYS_HDMI_HPD)>;
+ input-enable;
+ bias-disable; /* external pull-up */
+ };
+ };
+
};
&uart0 {
@@ -221,3 +271,40 @@ &uart0 {
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
+
+&voutcrg {
+ status = "okay";
+};
+
+&display {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pins>;
+
+ hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ hdmi_input: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dc_out_dpi0>;
+ };
+ };
+};
+
+&dc8200 {
+ status = "okay";
+
+ dc_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dc_out_dpi0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&hdmi_input>;
+ };
+
+ };
+};
@@ -249,6 +249,11 @@ tdm_ext: tdm-ext-clock {
#clock-cells = <0>;
};
+ display: display-subsystem {
+ compatible = "verisilicon,display-subsystem";
+ ports = <&dc_out>;
+ };
+
soc {
compatible = "simple-bus";
interrupt-parent = <&plic>;
@@ -570,5 +575,46 @@ voutcrg: clock-controller@295c0000 {
#reset-cells = <1>;
power-domains = <&pwrc JH7110_PD_VOUT>;
};
+
+ dc8200: dc8200@29400000 {
+ compatible = "verisilicon,dc8200";
+ reg = <0x0 0x29400000 0x0 0x100>,
+ <0x0 0x29400800 0x0 0x2000>,
+ <0x0 0x295B0000 0x0 0x90>;
+ interrupts = <95>;
+ clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_DISP_AXI>,
+ <&voutcrg JH7110_VOUTCLK_DC8200_PIX0>,
+ <&voutcrg JH7110_VOUTCLK_DC8200_PIX1>,
+ <&voutcrg JH7110_VOUTCLK_DC8200_AXI>,
+ <&voutcrg JH7110_VOUTCLK_DC8200_CORE>,
+ <&voutcrg JH7110_VOUTCLK_DC8200_AHB>,
+ <&hdmitx0_pixelclk>,
+ <&voutcrg JH7110_VOUTCLK_DC8200_PIX>;
+ clock-names = "clk_vout_noc_disp",
+ "clk_vout_pix0","clk_vout_pix1",
+ "clk_vout_axi","clk_vout_core",
+ "clk_vout_vout_ahb","hdmitx0_pixel",
+ "clk_vout_dc8200";
+ resets = <&voutcrg JH7110_VOUTRST_DC8200_AXI>,
+ <&voutcrg JH7110_VOUTRST_DC8200_AHB>,
+ <&voutcrg JH7110_VOUTRST_DC8200_CORE>;
+ reset-names = "rst_vout_axi","rst_vout_ahb",
+ "rst_vout_core";
+ };
+
+ hdmi: hdmi@29590000 {
+ compatible = "starfive,hdmi";
+ reg = <0x0 0x29590000 0x0 0x4000>;
+ interrupts = <99>;
+
+ clocks = <&voutcrg JH7110_VOUTCLK_HDMI_TX_SYS>,
+ <&voutcrg JH7110_VOUTCLK_HDMI_TX_MCLK>,
+ <&voutcrg JH7110_VOUTCLK_HDMI_TX_BCLK>,
+ <&hdmitx0_pixelclk>;
+ clock-names = "sysclk", "mclk","bclk","pclk";
+ resets = <&voutcrg JH7110_VOUTRST_HDMI_TX_HDMI>;
+ reset-names = "hdmi_tx";
+ #sound-dai-cells = <0>;
+ };
};
};
Add the dc controller and hdmi node for the Starfive JH7110 SoC. Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com> --- .../jh7110-starfive-visionfive-2.dtsi | 87 +++++++++++++++++++ arch/riscv/boot/dts/starfive/jh7110.dtsi | 46 ++++++++++ 2 files changed, 133 insertions(+)