| Message ID | 20230604061421.3787649-3-alexeymin@postmarketos.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [1/3] dt-bindings: remoteproc: qcom,msm8996-mss-pil: Add SDM660 compatible | expand |
On 4.06.2023 08:14, Alexey Minnekhanov wrote: > Modem subsystem in SDM630/660 is similar to MSM8998 and > device tree node for it is based on the one from msm8998.dtsi. > > Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org> > --- > arch/arm64/boot/dts/qcom/sdm630.dtsi | 57 ++++++++++++++++++++++++++++ > 1 file changed, 57 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi > index 5c4086d2fa99c..5e68972d48fb4 100644 > --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi > @@ -1026,6 +1026,63 @@ data-pins { > }; > }; > > + remoteproc_mss: remoteproc@4080000 { > + compatible = "qcom,sdm660-mss-pil"; > + reg = <0x04080000 0x100>, <0x04180000 0x40>; > + reg-names = "qdsp6", "rmb"; > + > + interrupts-extended = > + <&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>, > + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, > + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, > + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, > + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, > + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; Please remove the \n\t\t\t after = and align them to the first entry > + interrupt-names = "wdog", "fatal", "ready", > + "handover", "stop-ack", > + "shutdown-ack"; Please turn this and clock-names into vertical lists with one entry per line > + > + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, > + <&gcc GCC_BIMC_MSS_Q6_AXI_CLK>, And these too, align them with a space. looks good otherwise! Konrad > + <&gcc GCC_BOOT_ROM_AHB_CLK>, > + <&gcc GPLL0_OUT_MSSCC>, > + <&gcc GCC_MSS_SNOC_AXI_CLK>, > + <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>, > + <&rpmcc RPM_SMD_QDSS_CLK>, > + <&rpmcc RPM_SMD_XO_CLK_SRC>; > + clock-names = "iface", "bus", "mem", "gpll0_mss", > + "snoc_axi", "mnoc_axi", "qdss", "xo"; > + > + qcom,smem-states = <&modem_smp2p_out 0>; > + qcom,smem-state-names = "stop"; > + > + resets = <&gcc GCC_MSS_RESTART>; > + reset-names = "mss_restart"; > + > + qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; > + > + power-domains = <&rpmpd SDM660_VDDCX>, > + <&rpmpd SDM660_VDDMX>; > + power-domain-names = "cx", "mx"; > + > + status = "disabled"; > + > + mba { > + memory-region = <&mba_region>; > + }; > + > + mpss { > + memory-region = <&mpss_region>; > + }; > + > + glink-edge { > + interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>; > + label = "modem"; > + qcom,remote-pid = <1>; > + mboxes = <&apcs_glb 15>; > + }; > + }; > + > adreno_gpu: gpu@5000000 { > compatible = "qcom,adreno-508.0", "qcom,adreno"; >
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 5c4086d2fa99c..5e68972d48fb4 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -1026,6 +1026,63 @@ data-pins { }; }; + remoteproc_mss: remoteproc@4080000 { + compatible = "qcom,sdm660-mss-pil"; + reg = <0x04080000 0x100>, <0x04180000 0x40>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = + <&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack", + "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_BIMC_MSS_Q6_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&gcc GPLL0_OUT_MSSCC>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>, + <&rpmcc RPM_SMD_QDSS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "bus", "mem", "gpll0_mss", + "snoc_axi", "mnoc_axi", "qdss", "xo"; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; + + power-domains = <&rpmpd SDM660_VDDCX>, + <&rpmpd SDM660_VDDMX>; + power-domain-names = "cx", "mx"; + + status = "disabled"; + + mba { + memory-region = <&mba_region>; + }; + + mpss { + memory-region = <&mpss_region>; + }; + + glink-edge { + interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 15>; + }; + }; + adreno_gpu: gpu@5000000 { compatible = "qcom,adreno-508.0", "qcom,adreno";
Modem subsystem in SDM630/660 is similar to MSM8998 and device tree node for it is based on the one from msm8998.dtsi. Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org> --- arch/arm64/boot/dts/qcom/sdm630.dtsi | 57 ++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+)